-
Bestsellers
-
Belts, chains, rollers
-
Body
-
Brakes
-
Damping
-
Drive shaft and cv joint
-
Electrics
-
Engine
-
Engine cooling system
-
Exhaust
-
Filters
-
Fuel supply system
-
Gaskets and sealing rings
-
Ignition and preheating
-
Interior
-
Oils and fluids
-
Propshafts and differentials
-
Sensors, relays, control units
-
Steering
-
Suspension
-
Wiper and washer system
Parts FORD USA Fusion I 3.0 All-wheel Drive 222 hp
-
Brake pads
-
Oil filter
-
Shock absorber
-
Air filter
-
Wiper blades
-
Wheel hub
-
Anti-roll bar link
-
Suspension arm
-
Track rod end
-
Ball joint
-
Ignition coil
-
Suspension bushes
Damping
Top
A-Z
-
Shock absorber
-
Top strut mount and bearing
Electrics
Top
A-Z
-
Tyre pressure sensor (TPMS)
-
Ignition switch
-
Camshaft adjustment valve
Engine
Top
A-Z
-
Tappet
-
Rocker cover gasket
-
Head gasket
-
Engine mount
-
Ignition coil
-
Oil filter
-
Air filter
-
Valve stem seals
-
Ignition leads
-
Oil drain plug gasket
-
Intake manifold gasket
-
Head bolts
-
Sump plug
-
Exhaust manifold gasket
-
Crankshaft seal
-
Belt tensioner, v-ribbed belt
-
Sump gasket
-
Injector seals
-
Oil sump
-
Crankshaft pulley
-
Camshaft seal
-
Crankcase gasket
-
Expansion tank cap
-
Engine coolant
-
Coolant circuit seals
-
Thermostat gasket
-
Full gasket set, engine
-
Camshaft adjustment valve
-
Performance air filter
Engine cooling system
Top
A-Z
Gaskets and sealing rings
Top
A-Z
-
Rocker cover gasket
-
Head gasket
-
Valve stem seals
-
Oil drain plug gasket
-
Intake manifold gasket
-
Exhaust manifold gasket
-
Crankshaft seal
-
Exhaust gasket
-
Sump gasket
-
Injector seals
-
Camshaft seal
-
Crankcase gasket
-
Coolant circuit seals
-
Thermostat gasket
-
Full gasket set, engine
-
Door seal
-
Drive shaft oil seal
Interior
Top
A-Z
-
Ignition switch
Oils and fluids
Top
A-Z
-
Engine coolant
-
Screenwash
Sensors, relays, control units
Top
A-Z
-
Tyre pressure sensor (TPMS)
-
Camshaft adjustment valve
Suspension
Top
A-Z
Automotive products for FORD USA Fusion I 3.0 All-wheel Drive 2006 year, 222 hp

incl. 20% VAT, excl. delivery costs
- Product line: DriveAlign
- Diameter [mm]: 76
- Width [mm]: 31
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Filter type: Spin-on Filter
- Height [mm]: 110
- Diameter [mm]: 93
- Vehicle type: Built Before 9-24-08
- Condition: New
Over 100 in stock
-17%
compared to RRP:
£ 30,99
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle Ø [mm]: 114
- Weight [kg]: 1,903
- Inner Diameter [mm]: 28
- Diameter [mm]: 140
- External Toothing wheel side: 28
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Packing Type: Bag
- Capacity [ml]: 5
- Weight [g]: 5
- Colour: transparent
- Chemical Properties: Long-term Protection, high corrosion protection, Heat-resistant, Water-repellent, Saltwater-Resistant, not metalliferous, Silicon-free
- Observe technical data
- Observe mounting information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
-
- Required quantity: 24
- TecDoc Engine Number: C30PDED
- Operating Mode: Hydraulic
- Fitting Position: Intake Side, Exhaust Side
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Packing Type: Blister Pack, Bag
- Capacity [ml]: 400
- Quantity Unit: Millilitre
- Colour: black
- Chemical Properties: hardening, High-module
- Processing time [minutes]: 20
- Tightening Torque [N/mm²]: 7,5
- Observe technical data
- Observe mounting information
- Condition: New
Over 100 in stock
-30%
compared to RRP:
£ 22,28
incl. 20% VAT, excl. delivery costs
- Quantity Unit: Kit
- Nominal Size [mm]: 4,5
- Pipe length [mm]: 500
- Material: POM (Polyoxymethylene), Polyamid 6, EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article / Supplementary Info Info 2: with connecting pipe
- Supplementary Article / Supplementary Info: with gaskets/seals
- Packing Type: Blister Pack
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Weight [kg]: 0,066
- Packaging length [cm]: 8,0
- Packaging width [cm]: 8,0
- Packaging height [cm]: 1,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Inner Diameter [mm]: 12,4
- Height [mm]: 18,7
- Material: FPM (fluoride rubber)
- Required quantity: 24
- Valve Stem Diameter [mm]: 6
- Diameter [mm]: 25,3
- Goods tariff number: 8484200000
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
-
- Fitting Position: frontal sided
- TecDoc Engine Number: C30PDED
- Inner Diameter [mm]: 47
- Height [mm]: 8,5
- Diameter [mm]: 63,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Thread Size: M12x1,75x21
- Spanner Size: 15 mm, 15
- Bolt Head-/Nut Design: Male Hex
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Goods tariff number: 7318158066
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Wear Warning Contact: not prepared for wear warning indicator
- Quantity Unit: Axle Set
- Height [mm]: 42
- Width [mm]: 110,8
- Thickness [mm]: 14,3
- WVA Number: 24581
- Weight [kg]: 0,81
- Article number of recommended accessories: 82051500
- Brake System: Akebono
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £ 140 within the UK
Fast delivery