Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs FORD USA Crown Victoria II (EN114) 4.6 177 hp Petrol
- Ignition coil FORD USA Crown Victoria II (EN114) 4.6 177 hp Petrol
- Camshaft sensor FORD USA Crown Victoria II (EN114) 4.6 177 hp Petrol
- Crankshaft sensor FORD USA Crown Victoria II (EN114) 4.6 177 hp Petrol
- Interior
- Oils and fluids
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Spark plugs FORD USA Crown Victoria II (EN114) 4.6 177 hp Petrol
Article №: 686S0033
Details
- External Thread [mm]: 14
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Tightening angle [degrees]: 15
- Condition: New
More
-47%
compared to RRP:
£ 4,40
£ 2,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0318
Details
- External Thread [mm]: 14
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Tightening angle [degrees]: 15
- Condition: New
More
£ 9,19
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990032
Details
- External Thread [mm]: 14
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Tightening angle [degrees]: 15
- Condition: New
More
-47%
compared to RRP:
£ 4,40
£ 2,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0033P
Details
- Product line: Nickel
- Thread Length [mm]: 17,5
- Spark Position [mm]: 4
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Condition: New
More
£ 3,01
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CCH401
OE151, 401
Details
- Product line: Powersport
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: SAE
- Required quantity: 8
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RS12YC
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 9,5
- Packaging width [cm]: 2,4
- Packaging height [cm]: 2,2
- Resistor from [kOhm]: 6
- Resistor to [kOhm]: 15
- Projection [mm]: 1,5
- Condition: New
More
-44%
compared to RRP:
£ 5,60
£ 3,10
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: Z117
14 KR-9 DUX, 0002625700
Details
- Product line: ULTRA
- Thread Length [mm]: 17,5
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Technical Information Number: 14 KR-9 DUX
- Tightening torque from [Nm]: 10
- Tightening torque to [Nm]: 20
- Condition: New
More
-47%
compared to RRP:
£ 7,02
£ 3,67
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CET9
Details
-
- Required quantity: 8
- Alternatively
- Product line: Aerovantage Spoiler
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat
- Thread Size: M14x1.25
- Connector type: SAE
- Packing Type: Box
- Quality/ Grade: Ti Poly-V
- Technical Information Number: CET9
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
-25%
compared to RRP:
£ 10,46
£ 7,81
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-19990316
Details
- External Thread [mm]: 14
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Tightening angle [degrees]: 15
- Condition: New
More
£ 9,19
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: Z81
14 K-9 DU0, 0001625702
Details
- Supplementary Info: ULTRA
- Thread Length [mm]: 17,5
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat
- Thread Size: M14x1,25
- Connector type: SAE
- Technical Information Number: 14 K-9 DU0
- Tightening torque from [Nm]: 10
- Tightening torque to [Nm]: 20
- Condition: New
More
£ 1,43
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: RS12YC/013
Details
- Thread Length [mm]: 17,5
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat
- Thread Size: M14x1.25
- Connector type: SAE
- Required quantity: 8
- Condition: New
More
£ 2,75
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: UPT9
Details
-
- Required quantity: 8
- Alternatively
- Supplementary Info: ULTRA TITAN
- Thread Length [mm]: 17,5
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Quality/ Grade: Poly-V Tit
- Tightening torque from [Nm]: 10
- Tightening torque to [Nm]: 20
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Condition: New
More
-54%
compared to RRP:
£ 12,23
£ 5,51
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: EON3/286
EON3
Details
-
- Required quantity: 8
- Alternatively
- Supplementary Info: Screw on
- Thread Length [mm]: 17,5
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14x1,25
- Connector type: M4/BRASS SAE
- Version: with taper seat
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Condition: New
More
£ 5,97
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: EON3/287
Details
- Supplementary Info: Screw on
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Self-service suited packaging see parts list
- Packing Type: Box
- Quality/ Grade: Ni125 GE
- Alternatively
- Technical Information Number: EON3
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 10,4
- Packaging width [cm]: 3,5
- Packaging height [cm]: 2,56
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£ 14,71
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: CET9SB
CET9P
Details
-
- Required quantity: 8
- Alternatively
- Product line: Aerovantage Spoiler
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat
- Thread Size: M14x1.25
- Connector type: SAE
- Self-service suited packaging see parts list
- Packing Type: Blister Pack
- Quality/ Grade: Ti Poly-V
- Technical Information Number: CET9
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 20
- Packaging width [cm]: 10
- Packaging height [cm]: 3,2
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
-58%
compared to RRP:
£ 42,70
£ 17,93
incl. 20% VAT, excl. delivery costs
Not in stock
Details
