Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Wheel hub Ford Maverick UDS UNS 2.4i (UDS) 116 hp Petrol
- Wheel bearing Ford Maverick UDS UNS 2.4i (UDS) 116 hp Petrol
- Anti-roll bar link Ford Maverick UDS UNS 2.4i (UDS) 116 hp Petrol
- Track rod end Ford Maverick UDS UNS 2.4i (UDS) 116 hp Petrol
- Engine mount Ford Maverick UDS UNS 2.4i (UDS) 116 hp Petrol
- Suspension kit Ford Maverick UDS UNS 2.4i (UDS) 116 hp Petrol
- Inner tie rod Ford Maverick UDS UNS 2.4i (UDS) 116 hp Petrol
- ABS sensor Ford Maverick UDS UNS 2.4i (UDS) 116 hp Petrol
- Ball joint Ford Maverick UDS UNS 2.4i (UDS) 116 hp Petrol
- Suspension bushes Ford Maverick UDS UNS 2.4i (UDS) 116 hp Petrol
- Shock absorber dust cover and bump stops MAVERICK 2.4i (UDS) 116 hp Petrol
- Anti-roll bar bushes MAVERICK 2.4i (UDS) 116 hp Petrol
- Wheel spacers MAVERICK 2.4i (UDS) 116 hp Petrol
- Repair kit, wheel suspension MAVERICK 2.4i (UDS) 116 hp Petrol
- Abs ring MAVERICK 2.4i (UDS) 116 hp Petrol
- Mounting, shock absorbers MAVERICK 2.4i (UDS) 116 hp Petrol
- Anti-roll bar stabiliser kit MAVERICK 2.4i (UDS) 116 hp Petrol
- Towbar / parts
- Wiper and washer system
Repair kit, wheel suspension Ford Maverick UDS UNS 2.4 i (UDS) 116 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
FORD MAVERICK (UDS, UNS) 2.4 i (UDS) year of manufacture 1996, 116 hp vehicle parts products
incl. 20% VAT, free delivery
- Required quantity: 1
- Fitting Position: Rear Axle, Front Axle
- Weight [kg]: 4,227
- Control/Trailing Arm Type: for control arm, for trailing arm
- Supplementary Article / Supplementary Info Info 2: with grease cap
- Colour: red
- Material: PU (Polyurethane)
- Shore-A hardness value, base body: 80
- Number of Parts [parts]: 20
- Condition: New
Over 100 in stock
-65%
compared to RRP:
£68,01
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Left, Rear Axle Right
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: for trailing arm
- Supplementary Article / Supplementary Info Info 2: with lock screw set
- Required quantity: 1
- Diameter [mm]: 60
- Condition: New
Over 100 in stock