Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
-
Clutch
- Clutch kit Ford Kuga Mk1 2.0TDCi 4x4 136 hp Diesel
- Flywheel Ford Kuga Mk1 2.0TDCi 4x4 136 hp Diesel
- Clutch master cylinder Ford Kuga Mk1 2.0TDCi 4x4 136 hp Diesel
- Clutch slave cylinder Ford Kuga Mk1 2.0TDCi 4x4 136 hp Diesel
- Central slave cylinder Ford Kuga Mk1 2.0TDCi 4x4 136 hp Diesel
- Clutch release bearing Ford Kuga Mk1 2.0TDCi 4x4 136 hp Diesel
- Pedals and pedal covers Ford Kuga Mk1 2.0TDCi 4x4 136 hp Diesel
- Flywheel bolt Ford Kuga Mk1 2.0TDCi 4x4 136 hp Diesel
- Clutch switch Ford Kuga Mk1 2.0TDCi 4x4 136 hp Diesel
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Clutch kit Ford Kuga Mk1 2.0 TDCi 4x4 136 hp Diesel
Article №: 479C0195
Details
- Construction Year from: 12/2009
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
£97,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 479C0121
Details
-
- Construction Year from: 12/2009
- not for OE number: AG91-6477-AD, AG91-6477-AE
- Manufacturer Restriction: SACHS
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 23x26-23N
- Multi-piece: two-piece
- Condition: New
More
£102,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 479C0369
Details
- Construction Year from: 12/2009
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
£123,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 479C0998
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, without central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Weight [kg]: 19,53
- Extention Force [N]: 6300
- Number of mounting bores: 6
- Tightening Torque [Nm]: 30
- Condition: New
More
Article №: ADF123035
Details
- Construction Year from: 12/2009
- Diameter [mm]: 241
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: two-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: New
More
Inside the package:
- Clutch Disc 1
- Grease 1
More
£98,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKCK-0100120
Details
-
- Construction Year from: 12/2009
- not for OE number: AG91-6477-AD, AG91-6477-AE
- Manufacturer Restriction: SACHS
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Multi-piece: two-piece
- Condition: New
More
£102,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: KC214
Details
- Construction Year from: 12/2009
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, Check and replace dual-mass flywheel if necessary., Requires special tools for mounting, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
£103,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 100.688
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with release plate, with clutch disc
- for flywheel manufacturer: Sachs
- Clutch Equipment: cover, disc
- Condition: New
More
£116,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 100.691
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with release plate, with clutch disc
- for flywheel manufacturer: LUK
- Clutch Equipment: cover, disc
- Condition: New
More
£120,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKCK-0100370
Details
- Construction Year from: 12/2009
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
£123,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 112.715
Details
-
- TecDoc Engine Number: G6DG, UKDA
- Transmission Type: Manual Transmission
- not for OE number: AG91 6477 AD, AG91 6477 AE
- Construction Year to: 11/2009
- Number of Teeth: 23
- Hub Profile: 25,9 x 22,9
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Equipment: cover, disc
- Number of Parts [parts]: 2
- Condition: New
More
£123,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADF1230120
Details
- Construction Year from: 12/2009
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: New
More
£124,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 962572
Details
- Construction Year from: 12/2009
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Hub Profile: 26 x 23
- Condition: New
More
£129,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: F1G060NX
Details
- Construction Year from: 12/2009
- Diameter [mm]: 240
- Number of Teeth: 23
- Condition: New
More
£136,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: F1G040NX
Details
- Construction Year from: 12/2009
- Diameter [mm]: 240
- Number of Teeth: 23
- Condition: New
More
£138,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3000 970 003
Details
-
- only in connection with: 2294 000 111
- Construction Year from: 12/2009
- not for OE number: AG91-6477-AD, AG91-6477-AE
- Manufacturer Restriction: SACHS
- Observe service information
- Product line: XTend
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 23x26-23N
- only to be used within set
- only available in set
- Condition: New
More
£142,54
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 120.692
Details
- Supplementary Article / Supplementary Info Info 2: with release plate, with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder
- for flywheel manufacturer: LUK
- Clutch Equipment: hydr.bearing(CSC)
- Condition: New
More
Article №: CKE-FO32R
Details
- Construction Year from: 12/2009
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- Condition: New
More
Article №: 832506
Details
-
- Construction Year from: 04/2010
- Engine Code: UKMA
- Transmission Code: MMT6
- Transmission Type: 6-Speed Manual Transmission
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Hub Profile: 26,4 x 23,2
- Weight [kg]: 5,98
- Clutch: for vehicles with push type clutch
- Control Type: Push control
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Condition: New
More
Article №: 624 3297 09
Details
- Construction Year from: 12/2009
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
Article №: 826714
Details
-
- TecDoc Engine Number: G6DG, UKDA
- Transmission Type: Manual Transmission
- Construction Year from: 12/2009
- Product line: KIT2P
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Hub Profile: 26,2 x 23,2
- Weight [kg]: 5,59
- Clutch: for vehicles with push type clutch
- for flywheel manufacturer: SACHS
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 120.689
Details
- Supplementary Article / Supplementary Info Info 2: with release plate, with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder
- for flywheel manufacturer: Sachs
- Clutch Equipment: hydr.bearing(CSC)
- Condition: New
More
Article №: JT1763056
Details
-
- Transmission Type: 6-Speed Manual Transmission
- Number of Gears: 6 Speed
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder
- Hub Profile: 23.3x26.3
- Multi-piece: three-piece
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Friction Lining Outer Diameter 1 [mm]: 240
- Condition: New
More
Article №: 3000 970 126
Details
-
- Construction Year from: 12/2009
- for flywheel manufacturer: LUK
- Manufacturer Restriction: LUK
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 23,1x26,1-23N
- Observe service information
- only available in set
- Condition: New
More
Article №: 834579
Details
-
- Engine Code: G6DG, UKDA
- Transmission Type: 6-Speed Manual Transmission
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 26,4 x 23,2
- Weight [kg]: 6,5
- Bore Diameter [mm]: 31
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- Condition: New
More
Showing 25 out of 92 products
Show the next items
- 1
- 2
- 3
- 4
