Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
-
Exhaust
- Lambda sensor Fiat Grande Punto 199 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Turbo Fiat Grande Punto 199 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Catalytic converter Fiat Grande Punto 199 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Intercooler Fiat Grande Punto 199 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Exhaust silencer Fiat Grande Punto 199 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Sensor, exhaust gas temperature Fiat Grande Punto 199 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Mounting kit, exhaust system Fiat Grande Punto 199 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Exhaust pipe Fiat Grande Punto 199 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Boost pressure sensor Fiat Grande Punto 199 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Flex pipe Fiat Grande Punto 199 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Exhaust hanger GRANDE PUNTO 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Exhaust manifold gasket GRANDE PUNTO 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Turbo oil feed pipe GRANDE PUNTO 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Exhaust manifold GRANDE PUNTO 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Exhaust gasket GRANDE PUNTO 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Exhaust clamp GRANDE PUNTO 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Clamp, exhaust system GRANDE PUNTO 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Silencer rubber GRANDE PUNTO 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Silencer mounting kit GRANDE PUNTO 1.4LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Lambda sensor Fiat Grande Punto 199 1.4 LPG 78 hp Petrol/Liquified Petroleum Gas (LPG)
Article №: 3922L0225
Details
-
- Construction Year to: 12/2011
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Equipment: for vehicles with start-stop function
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 660
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0025
Details
-
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- Fitting Position: Exhaust Manifold
- Exhaust System: after catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 490
- Number of pins: 4
- Conductor Number: 4
- Connector Shape: oval
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 39,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0048
Details
-
- Construction Year to: 12/2012
- Fitting Position: Front
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 420
- Number of circuits: 4
- Connector Shape: D Shape
- Number of used contacts: 4
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 47,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0167
Details
-
- Construction Year to: 12/2011
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Equipment: for vehicles without start-stop function
-
- Construction Year to: 12/2011
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Vehicle Equipment: for vehicles without start-stop function
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 49,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-AU-003
Details
-
- Fitting Position: Front
- Exhaust System: before catalytic converter
- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position: before catalytic converter
- Fabrication Number: ESL-AU-003
- Condition: New
More
£ 23,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-AU-011
Details
-
- Fitting Position: Front
- Exhaust System: before catalytic converter
- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position: before catalytic converter
- Number of circuits: 4
- Fabrication Number: ESL-AU-011
- Condition: New
More
£ 26,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 01759
Details
- Oxygen Sensor: Regulating Probe
- Number of pins: 4
- Length [mm]: 580
- Condition: New
More
£ 27,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-CH-009
Details
-
- Fitting Position: Front
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: after catalytic converter
- Number of circuits: 4
- Fabrication Number: ESL-CH-009
- Condition: New
More
£ 28,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-FT-004
Details
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased
- Fitting Position: Front, before catalytic converter, after catalytic converter
- Fabrication Number: ESL-FT-004
- Condition: New
More
£ 29,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-AU-005
Details
-
- Fitting Position: Front
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position: before catalytic converter
- Overall Length [mm]: 1010
- Number of circuits: 4
- Fabrication Number: ESL-AU-005
- Condition: New
More
£ 29,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-VW-001
Details
-
- Fitting Position: Front
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: after catalytic converter
- Fabrication Number: ESL-VW-001
- Condition: New
More
£ 29,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-RE-001
Details
-
- Fitting Position: Front
- Exhaust System: before catalytic converter
- Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased
- Fitting Position: before catalytic converter, after catalytic converter
- Fabrication Number: ESL-RE-001
- Condition: New
More
£ 30,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-AU-008
Details
-
- Fitting Position: Front
- Exhaust System: before catalytic converter
- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position: before catalytic converter
- Fabrication Number: ESL-AU-008
- Condition: New
More
£ 30,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-AU-007
Details
-
- Fitting Position: Front
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: after catalytic converter
- Fabrication Number: ESL-AU-007
- Condition: New
More
£ 31,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140082
Details
-
- Construction Year to: 12/2011
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Equipment: for vehicles with start-stop function
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 660
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0225P
Details
-
- Construction Year to: 12/2011
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Equipment: for vehicles with start-stop function
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 34,61
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0167P
Details
-
- Construction Year to: 12/2011
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Equipment: for vehicles without start-stop function
-
- Construction Year to: 12/2011
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Vehicle Equipment: for vehicles without start-stop function
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 530
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 35,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140024
Details
-
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- Fitting Position: Exhaust Manifold
- Exhaust System: after catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 490
- Number of pins: 4
- Conductor Number: 4
- Connector Shape: oval
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 39,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140080
Details
-
- Construction Year to: 12/2011
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Equipment: for vehicles without start-stop function
-
- Construction Year to: 12/2011
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Vehicle Equipment: for vehicles without start-stop function
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 49,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0025P
Details
-
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- Fitting Position: Exhaust Manifold
- Exhaust System: after catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 490
- Number of pins: 4
- Conductor Number: 4
- Connector Shape: oval
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 50,90
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220209
Details
-
- Construction Year to: 12/2011
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Equipment: for vehicles without start-stop function
-
- Construction Year to: 12/2011
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Vehicle Equipment: for vehicles without start-stop function
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 170
- Number of pins: 4
- Conductor Number: 4
- Connector Shape: oval
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 54,81
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220130
Details
-
- Construction Year to: 12/2011
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Equipment: for vehicles without start-stop function
-
- Construction Year to: 12/2011
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Vehicle Equipment: for vehicles without start-stop function
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 59,21
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220013
Details
-
- Construction Year to: 12/2011
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Equipment: for vehicles with start-stop function
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 660
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 67,34
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220149
Details
-
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- Fitting Position: Exhaust Manifold
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 490
- Number of pins: 4
- Conductor Number: 4
- Connector Shape: oval
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 73,07
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220112
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 420
- Number of circuits: 4
- Connector Shape: D Shape
- Number of used contacts: 4
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 88,50
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 211 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
