Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs FIAT Fiorino II Van (146) 75i.e. 1.6 75 hp Petrol
- Ignition coil FIAT Fiorino II Van (146) 75i.e. 1.6 75 hp Petrol
- Ignition leads FIAT Fiorino II Van (146) 75i.e. 1.6 75 hp Petrol
- Camshaft sensor FIAT Fiorino II Van (146) 75i.e. 1.6 75 hp Petrol
- Crankshaft sensor FIAT Fiorino II Van (146) 75i.e. 1.6 75 hp Petrol
- Distributor cap FIAT Fiorino II Van (146) 75i.e. 1.6 75 hp Petrol
- Distributor rotor FIAT Fiorino II Van (146) 75i.e. 1.6 75 hp Petrol
- Distributor and parts FIAT Fiorino II Van (146) 75i.e. 1.6 75 hp Petrol
- Plug, spark plug FIAT Fiorino II Van (146) 75i.e. 1.6 75 hp Petrol
- Engine control unit (ECU) FIAT Fiorino II Van (146) 75i.e. 1.6 75 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Spark plugs FIAT Fiorino II Van (146) 75 i.e. 1.6 75 hp Petrol
Article №: 686S0012
Details
-
- electrode gap to be set [mm]: 0,9
- TecDoc Engine Number: 146 C6.000
- Construction Year to: 06/1995
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
-39%
compared to RRP:
£4,20
£2,54
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0104
Details
-
- Alternatively
- electrode gap to be set [mm]: 0,7
- Recommended change interval [km]: 20000
- TecDoc Engine Number: 146 D6.000, 146 C6.000
- Required quantity: 4
- Fuel Type: Liquefied Petroleum Gas (LPG)
- Product line: ULTRA
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1,25
- Connector type: SAE
- Tightening torque from [Nm]: 20
- Condition: New
More
-40%
compared to RRP:
£5,00
£2,97
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0014
Details
-
- electrode gap to be set [mm]: 0,9
- TecDoc Engine Number: 146 D6.000
- Construction Year from: 06/1995
- External Thread [mm]: M14 x 1,25
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,8
- Spark Plug: 3 - Earthed Electrode, Nickel Middle Electrode
- Connector type: M4/SAE
- Number of pins: 3
- Condition: New
More
-35%
compared to RRP:
£5,90
£3,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990011
Details
-
- electrode gap to be set [mm]: 0,9
- TecDoc Engine Number: 146 C6.000
- Construction Year to: 06/1995
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
-73%
compared to RRP:
£4,19
£1,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: W22EPR-U
D19
Details
-
- TecDoc Engine Number: 146 C6.000, 146 D6.000
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spanner Size: 20.6 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Removable SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 56
- for OE number: 5099949
- alternative item: W22TT
- Condition: New
More
-19%
compared to RRP:
£3,68
£2,97
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 245 552
WR 5 D+, Set 4 - 0 242 245 812
Details
-
- TecDoc Engine Number: 146 C6.000
- Construction Year to: 06/1995
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£2,97
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 240 592
Set 4 - 0 242 240 849, Blister N15 - WR 6 DC
Details
-
- electrode gap to be set [mm]: 0,9
- TecDoc Engine Number: 146 C6.000
- Construction Year to: 06/1995
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£2,97
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990014
Details
-
- electrode gap to be set [mm]: 0,9
- TecDoc Engine Number: 146 D6.000
- Construction Year from: 06/1995
- External Thread [mm]: M14 x 1,25
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,8
- Spark Plug: 3 - Earthed Electrode, Nickel Middle Electrode
- Connector type: M4/SAE
- Number of pins: 3
- Condition: New
More
-42%
compared to RRP:
£5,90
£3,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 7090504
Details
- Thread Length [mm]: 19
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
- for OE number: 5894588
- Condition: New
More
£3,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 97416
Blister 10 - 4R
Details
- Supplementary Info: BLISTER
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spanner Size: 20,8 mm
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- Thread Size: M14 x 1,25
- TecDoc Engine Number: 146 C6.000
- Condition: New
More
£3,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 240 593
FR 6 D+, Blister N12 - FR 6 DC
Details
-
- electrode gap to be set [mm]: 0,9
- TecDoc Engine Number: 146 D6.000
- Construction Year from: 06/1995
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£3,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: OE018/T10
RN7YC, OE018
Details
- Product line: Powersport
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Required quantity: 4
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RN7YC
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,65
- Packaging width [cm]: 2,45
- Packaging height [cm]: 2,45
- Resistor from [kOhm]: 6
- Resistor to [kOhm]: 15
- Projection [mm]: 1,6
- Condition: New
More
-44%
compared to RRP:
£6,08
£3,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2023
BPR7ES
Details
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spanner Size: 20,8 mm
- Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- TecDoc Engine Number: 146 C6.000
- Condition: New
More
-31%
compared to RRP:
£4,93
£3,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: K22PR-U
D148
Details
-
- TecDoc Engine Number: 146 C6.000, 146 D6.000
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Removable SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 43
- for OE number: 2716033
- alternative item: IK22
- Condition: New
More
-29%
compared to RRP:
£4,79
£3,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: OE008/T10
RN7YCC, OE008
Details
- Supplementary Info: Screw on
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Required quantity: 4
- Packing Type: Box
- Quality/ Grade: Cu-core GE
- Technical Information Number: RN7YCC
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,65
- Packaging width [cm]: 2,45
- Packaging height [cm]: 2,45
- Resistor from [kOhm]: 6
- Resistor to [kOhm]: 15
- Projection [mm]: 1,5
- Condition: New
More
-43%
compared to RRP:
£6,70
£3,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1142
BPR7E
Details
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spanner Size: 20,8 mm
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- Thread Size: M14 x 1,25
- TecDoc Engine Number: 146 C6.000
- Condition: New
More
-36%
compared to RRP:
£6,04
£3,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 7265
V-Line 19
Details
- Product line: V-Line
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spanner Size: 20,8 mm
- Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- TecDoc Engine Number: 146 C6.000
- Condition: New
More
£3,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: Z252
14 FR-6 DUW, 0002340768
Details
-
- TecDoc Engine Number: 146 C6.000, 146 D6.000
- Required quantity: 4
- Product line: ULTRA
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1,25
- Connector type: SAE
- Technical Information Number: 14 FR-6 DUW
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: New
More
£3,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CET8
Details
-
- Required quantity: 4
- Alternatively
- Product line: Aerovantage Spoiler
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Packing Type: Box
- Quality/ Grade: Ti Poly-V
- Technical Information Number: CET8
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
-63%
compared to RRP:
£10,48
£3,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 7090521
Details
- Thread Length [mm]: 19
- Spanner Size: 20
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
- for OE number: 09482-00495
- Condition: New
More
£4,24
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3330
BCPR7ES
Details
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- Thread Size: M14 x 1,25
- TecDoc Engine Number: 146 D6.000
- Condition: New
More
-31%
compared to RRP:
£6,23
£4,24
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 245 536
FR 5 DC, Blister N27 - FR 5 DC
Details
-
- TecDoc Engine Number: 146 D6.000
- Construction Year from: 06/1995
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£4,67
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: Z30
14 FR-5 DU, 0002345702
Details
-
- Alternatively
- electrode gap to be set [mm]: 0,7
- Recommended change interval [km]: 20000
- TecDoc Engine Number: 146 D6.000, 146 C6.000
- Required quantity: 4
- Fuel Type: Liquefied Petroleum Gas (LPG)
- Product line: ULTRA
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1,25
- Connector type: SAE
- Self-service suited packaging see parts list
- Technical Information Number: 14 FR-5 DU
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: New
More
-40%
compared to RRP:
£7,82
£4,67
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: U-SERIE-MS-19
Details
-
- Electrode Gap [mm]: 0,9
- TecDoc Engine Number: 146 C6.000
- Spanner Size: 21
- Net weight [kg]: 0,26
- Gross Weight [kg]: 0,26
- Condition: New
More
-49%
compared to RRP:
£10,06
£5,09
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0013
Details
-
- electrode gap to be set [mm]: 0,9
- TecDoc Engine Number: 146 D6.000
- Construction Year from: 06/1995
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,8
- Spark Plug: 3 - Earthed Electrode
- Weight [kg]: 0,052
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£5,52
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 73 products
Show the next items
- 1
- 2
- 3
