-
Bestsellers
-
Air conditioning
-
Belts, chains, rollers
-
Body
-
Brakes
-
Damping
-
Drive shaft and cv joint
-
Electrics
-
Engine
-
Engine cooling system
-
Exhaust
-
Filters
-
Gaskets and sealing rings
-
Gearbox
-
Ignition and preheating
-
Oils and fluids
-
Pipes and hoses
-
Propshafts and differentials
-
Repair kits
-
Sensors, relays, control units
-
Steering
-
Suspension
-
Wiper and washer system
Parts FERRARI Dino 246 GT 206 GT 180 hp
-
Engine oil
-
Brake discs
-
Brake pads
-
Oil filter
-
Spark plugs
-
Shock absorber
-
Wiper blades
-
Brake hose
-
Cv boot
-
Oil drain plug gasket
-
ABS sensor
-
Sump plug
Belts, chains, rollers
Top
A-Z
Body
Top
A-Z
-
Headlights
-
Daytime running lights
-
Licence plate holder / bracket
Electrics
Top
A-Z
Engine
Top
A-Z
Gaskets and sealing rings
Top
A-Z
-
Oil drain plug gasket
-
Door seal
Oils and fluids
Top
A-Z
Pipes and hoses
Top
A-Z
-
Brake hose
Propshafts and differentials
Top
A-Z
-
Gearbox oil and transmission fluid
Repair kits
Top
A-Z
-
Alternator parts
Sensors, relays, control units
Top
A-Z
-
ABS sensor
-
Tyre pressure sensor (TPMS)
Suspension
Top
A-Z
-
Wheel bearing
-
Anti-roll bar link
-
Wheel hub
-
ABS sensor
-
Tyre pressure sensor (TPMS)
Automotive products for FERRARI Dino 246 GT 206GT 1969 year, 180 hp

incl. 20% VAT, excl. delivery costs
- Fitting Position: Wheel Side
- Height [mm]: 130
- Inner Diameter 2 [mm]: 22, 81
- Version: UNIVERSAL BOOT KIT
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Capacity [litre]: 1
- Oil Viscosity Classification SAE: 75W-90
- Manufacturer recommendations: Ford ESD-M2C 175-A
- Packing Type: Bottle
- API specification: GL-4/5
- Oil manufacturer recommendation: VW 501 50, ZF TE-ML 08
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 888
- Width [mm]: 10
- Driven Units: Alternator
- Outer Length [mm]: 898
- Tensile Cord Material: Polyester
- Belt Material: Polychloroprene (Neoprene)
- Colour: black
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Material: Copper
- Inner Diameter [mm]: 22
- Thickness [mm]: 1,5
- Diameter [mm]: 27
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spanner Size: 20,8 mm
- Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- Fuel Type: Liquefied Petroleum Gas (LPG)
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Vehicle Equipment: for vehicles with power steering
- Flange Diameter [mm]: 12
- Filter type: In-Line Filter
- Specification: Magnetfilter
- New part without deposit
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Packing Type: Bag
- Capacity [ml]: 5
- Weight [g]: 5
- Colour: transparent
- Chemical Properties: Long-term Protection, high corrosion protection, Heat-resistant, Water-repellent, Saltwater-Resistant, not metalliferous, Silicon-free
- Observe technical data
- Observe mounting information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
-
- Fitting Position: Driver side, Passenger Side
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Specification: Std Hook
- Length [mm]: 350
- Length [inch]: 14
- Weight [g]: 91
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 350
- Length [inch]: 14
- Weight [g]: 74
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Packing Type: Bottle
- Capacity [litre]: 1
- Oil: Mineral Oil
- Manufacturer recommendations: MAN 341 Typ E-1, MAN 341 Typ Z-2, MIL-L 2105, ZF TE-ML 16A, ZF TE-ML 17A, ZF TE-ML 19A, ZF 002054
- Oil Viscosity Classification SAE: 85W-90
- Product line: GL4
- API specification: GL-4
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Quantity Unit: Kit
- Nominal Size [mm]: 4,5
- Pipe length [mm]: 500
- Material: POM (Polyoxymethylene), Polyamid 6, EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article / Supplementary Info Info 2: with connecting pipe
- Supplementary Article / Supplementary Info: with gaskets/seals
- Packing Type: Blister Pack
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Height [mm]: 70
- Width [mm]: 76,8
- Thickness [mm]: 15
- Weight [kg]: 1,05
- Brake System: ATE
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £ 130 within the UK
Fast delivery