Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Suspension arm DODGE Durango (DN) 4.7 4WD 238 hp Petrol
- Wheel hub DODGE Durango (DN) 4.7 4WD 238 hp Petrol
- Wheel bearing DODGE Durango (DN) 4.7 4WD 238 hp Petrol
- Anti-roll bar link DODGE Durango (DN) 4.7 4WD 238 hp Petrol
- Engine mount DODGE Durango (DN) 4.7 4WD 238 hp Petrol
- Track rod end DODGE Durango (DN) 4.7 4WD 238 hp Petrol
- ABS sensor DODGE Durango (DN) 4.7 4WD 238 hp Petrol
- Ball joint DODGE Durango (DN) 4.7 4WD 238 hp Petrol
- Suspension bushes DODGE Durango (DN) 4.7 4WD 238 hp Petrol
- Anti-roll bar bushes DODGE Durango (DN) 4.7 4WD 238 hp Petrol
- Wiper and washer system
Suspension kit DODGE Durango (DN) 4.7 4WD 238 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
DODGE DURANGO 4.7 4WD year of manufacture 1997, 238 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Quantity: 2
- Packaging length [cm]: 9,2
- Packaging width [cm]: 2,5
- Packaging height [cm]: 2,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Article / Supplementary Info Info 2: with nut
- Fitting Position: Front Axle, Rear, Front, Lower, Front axle both sides
- Thread Size: M16X2
- Control/Trailing Arm Type: for control arm
- Required quantity: 1
- Quality/ Grade: 10.9
- Surface: Zinc-coated
- Thread Length [mm]: 40
- Screw length below head [mm]: 115
- Spanner Size: 21
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Control/Trailing Arm Type: Control Arm
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Article / Supplementary Info Info 2: with nut
- Diameter [mm]: 32
- Weight [kg]: 0,3
- Thread Size: M11X1.5
- Fitting Position: Upper, Rear Axle both sides, inner
- Control/Trailing Arm Type: for control arm
- Required quantity: 1
- Surface: Zinc-coated
- Thread Length [mm]: 20
- Quality/ Grade: 10.9
- Screw length below head [mm]: 76
- Spanner Size: 19
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Fitting Position: Front Axle Left, Front Axle Right
- Material: Aluminium
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Supplementary Article / Supplementary Info Info 2: with suspension rod
- reinforced version
- Required quantity: 1
- Supplementary Info: Quality
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: with fastening/mounting material, with holder
- Supplementary Article / Supplementary Info Info 2: with axle joint, with rubber mount, with coupling rod, with ball joint
- Control/Trailing Arm Type: Control Arm
- Steering: with tie rod ends
- Material: Sheet Steel
- Quantity per axle: 1
- Full Set
- for components see parts list
- Axle alignment required after fitting
- Supplementary Info: t+
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left, Rear Axle Right
- Weight [kg]: 0,424
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- for OE number: 33 32 6 792 525 S1
- Observe service information
- Supplementary Info: OE Turbo NEW
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: with axle joint, with rubber mount, with coupling rod
- Control/Trailing Arm Type: Control Arm
- Steering: with tie rod ends
- for components see parts list
- Quantity per axle: 1
- Axle alignment required after fitting
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Material: Aluminium
- Weight [kg]: 10,7
- Supplementary Info: BREMBO CO-CAST DISCS LINE
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Front Axle Right, Front Axle Left
- Quantity Unit: Set
- Net weight [kg]: 7,87
- Gross Weight [kg]: 8,55
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Rod/Strut: Guide Rod
- Fitting Position: Rear Axle
- Weight [kg]: 5,410
- for OE number: 1 061 670 S2
- Supplementary Info: OE Turbo NEW
- Condition: New
Over 100 in stock
