DODGE Dakota I - Typ: 2.5 AWD
- Manuf. year (from - to): 10.1989 - 09.1995
- Car body type: Pickup
- Type of drive: All-wheel Drive
- Cylinder capacity (cc): 2501
- Cylinders: 4
- Engine type: Petrol Engine
- Power: 99
- ABS: without ABS
- Valves per combustion chamber: 2
- Fuel type: Petrol
- Fuel handling: Intake Manifold Injection/ Carburettor
- Catalyst: with three-way catalytic converter
PARTS DODGE Dakota I 2.5 AWD 99 hp Petrol Engine EDM 1989 - 1995
-
Bestsellers
-
Belts, chains, rollers
-
Body
-
Brakes
-
Damping
-
Drive shaft and cv joint
-
Electrics
-
Engine
-
Engine cooling system
-
Exhaust
-
Filters
-
Fuel supply system
-
Gaskets and sealing rings
-
Ignition and preheating
-
Oils and fluids
-
Propshafts and differentials
-
Sensors, relays, control units
-
Steering
-
Suspension
-
Wiper and washer system
Parts DODGE Dakota I 2.5 AWD 99 hp
-
Brake discs
-
Brake pads
-
Spark plugs
-
Shock absorber
-
Wiper blades
-
Serpentine belt
-
Engine electrics
-
Ignition coil
-
Tappet
-
Cv boot
-
Oil drain plug gasket
-
Rocker cover gasket
Belts, chains, rollers
Top
A-Z
-
Serpentine belt
-
V-belt
-
Timing belt
-
Idler pulley, serpentine belt
-
Timing belt tensioner pulley
Body
Top
A-Z
-
Headlights
-
Daytime running lights
-
Licence plate holder / bracket
Brakes
Top
A-Z
-
Brake discs
-
Brake pads
-
Brake hose
-
Brake shoes
-
Wheel cylinder
-
Drum brake
Damping
Top
A-Z
-
Shock absorber
-
Top strut mount and bearing
Drive shaft and cv joint
Top
A-Z
-
Cv boot
-
Cv joint
Electrics
Top
A-Z
-
Lambda sensor
-
Alternator
-
Starter motor
-
Coolant temperature sensor
-
Battery
-
Crankshaft sensor
-
Intake air temperature sensor
-
Fuel pressure regulator
-
Tyre pressure sensor (TPMS)
Engine
Top
A-Z
-
Serpentine belt
-
Tappet
-
Rocker cover gasket
-
Head gasket
-
Thermostat
-
Ignition coil
-
Spark plugs
-
Engine electrics
-
Lambda sensor
-
Valve stem seals
-
Ignition leads
-
Oil drain plug gasket
-
Intake manifold gasket
-
Head bolts
-
Timing belt
-
Coolant temperature sensor
-
V-belt
-
Sump plug
-
Exhaust manifold gasket
-
Crankshaft seal
-
Injectors
-
Crankshaft sensor
-
Idler pulley, serpentine belt
-
Sump gasket
-
Piston rings
-
Camshaft seal
-
Crankcase gasket
-
Engine coolant
-
Timing belt tensioner pulley
-
Intake air temperature sensor
-
Fuel pressure regulator
-
Full gasket set, engine
-
Egr valve gasket
-
Cylinder head gasket set
Engine cooling system
Top
A-Z
-
Thermostat
-
Coolant temperature sensor
-
Engine coolant
Exhaust
Top
A-Z
-
Lambda sensor
-
Exhaust manifold gasket
-
Egr valve gasket
Filters
Top
A-Z
-
Oil filter
-
Air filter
-
Cabin filter
-
Fuel filter
Fuel supply system
Top
A-Z
-
Lambda sensor
-
Injectors
-
Fuel pressure regulator
Gaskets and sealing rings
Top
A-Z
-
Rocker cover gasket
-
Head gasket
-
Valve stem seals
-
Oil drain plug gasket
-
Intake manifold gasket
-
Exhaust manifold gasket
-
Crankshaft seal
-
Sump gasket
-
Camshaft seal
-
Crankcase gasket
-
Full gasket set, engine
-
Egr valve gasket
-
Door seal
Ignition and preheating
Top
A-Z
-
Spark plugs
-
Ignition coil
-
Ignition leads
-
Crankshaft sensor
Oils and fluids
Top
A-Z
-
Engine coolant
-
Screenwash
Propshafts and differentials
Top
A-Z
-
Propshaft coupling
Sensors, relays, control units
Top
A-Z
-
Lambda sensor
-
Coolant temperature sensor
-
Crankshaft sensor
-
Intake air temperature sensor
-
Fuel pressure regulator
-
Tyre pressure sensor (TPMS)
-
Temperature sensor
Steering
Top
A-Z
-
Track rod end
Suspension
Top
A-Z
-
Wheel bearing
-
Anti-roll bar link
-
Wheel hub
-
Tyre pressure sensor (TPMS)
Wiper and washer system
Top
A-Z
-
Wiper blades
-
Screenwash
Top Car parts maker
Automotive products for DODGE Dakota I 2.5AWD 1989 year, 99 hp
incl. 20% VAT, excl. delivery costs
- Fitting Position: Wheel Side, Front Axle
- Height [mm]: 146
- Inner Diameter 2 [mm]: 22, 86
- Joint Type: Universal Joint
- Supplementary Article / Supplementary Info Info 2: with clamps
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Voltage [V]: 12
- Battery Capacity [Ah]: 44
- Cold-test Current, EN [A]: 730
- Terminal Type: 1
- Length [mm]: 237
- Width [mm]: 172
- Height [mm]: 197
- Battery: AGM Battery
- Product line: RED TOP
- DIN/ISO: L2
- Post Positions: 1
- Hold-down Type: B1
- Condition: New
Over 100 in stock
-30%
compared to RRP:
£ 7,99
incl. 20% VAT, excl. delivery costs
- Length [mm]: 835
- Width [mm]: 10, 10,0
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Packing Type: Tin
- Capacity [ml]: 200
- Quantity Unit: Millilitre
- Consistency (property): Creamy
- Temperature range from [°C]: -40
- Temperature range to [°C]: 1500
- Chemical Properties: Food-Safe, Long-term Protection, Heat-resistant, not metalliferous, Water-repellent, Saltwater-Resistant, Silicon-free
- Observe technical data
- Observe mounting information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
-
- Fitting Position: frontal sided
- TecDoc Engine Number: EDM
- Inner Diameter [mm]: 28,5
- Material: ACM (Polyacrylate)
- Swirl Type: Right-hand Twist
- Height [mm]: 6
- Diameter [mm]: 41,2
- Condition: New
Over 100 in stock
-11%
compared to RRP:
£ 9,99
incl. 20% VAT, excl. delivery costs
-
- Fitting Position: Passenger Side
-
- Fitting Position: Driver side
- Length [mm]: 450
- Length [inch]: 18
- Wiper blade type: Flat wiper blade
- Weight [kg]: 0,088
- for OE number: 18FL450
- Condition: New
Over 100 in stock
-33%
compared to RRP:
£ 22,28
incl. 20% VAT, excl. delivery costs
- Quantity Unit: Kit
- Nominal Size [mm]: 4,5
- Pipe length [mm]: 500
- Material: POM (Polyoxymethylene), Polyamid 6, EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article / Supplementary Info Info 2: with connecting pipe
- Supplementary Article / Supplementary Info: with gaskets/seals
- Packing Type: Blister Pack
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: Micro-V
- Length [mm]: 970
- Number of ribs: 4
- Driven Units: Alternator
- Width [mm]: 14
- Tensile Cord Material: Polyester
- Belt Material: Rubber
- Colour: black
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: front propshaft at transfer case
- Diameter [mm]: 27
- Length [mm]: 82
- Supplementary Article / Supplementary Info: with grease-filled hub
- Packaging width [cm]: 8,2
- Packaging height [cm]: 2,7
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter 2 [mm]: 10
- Diameter [mm]: 28
- Length [mm]: 200
- Outer Diameter 2 [mm]: 28
- Condition: New
Over 100 in stock
-31%
compared to RRP:
£ 176,01
incl. 20% VAT, excl. delivery costs
- Alternator Charging Current [A]: 90
- Voltage [V]: 12
- Pulleys: with belt pulley
- Manufacturer Restriction: DENSO
- Quality: STANDARD LINE
- Version: 1210003380
- New part without deposit
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Width [mm]: 65
- Weight [kg]: 2,659
- Test Mark: ECE-R90
- Brake Pad: with crescent lining
- Inner brake drum diameter [mm]: 228,6
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £ 130 within the UK
Fast delivery
