Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Suspension arm Dodge Challenger Coupe 6.1 SRT8 431 hp Petrol
- Wheel hub Dodge Challenger Coupe 6.1 SRT8 431 hp Petrol
- Wheel bearing Dodge Challenger Coupe 6.1 SRT8 431 hp Petrol
- Top strut mount and bearing Dodge Challenger Coupe 6.1 SRT8 431 hp Petrol
- Anti-roll bar link Dodge Challenger Coupe 6.1 SRT8 431 hp Petrol
- Track rod end Dodge Challenger Coupe 6.1 SRT8 431 hp Petrol
- Engine mount Dodge Challenger Coupe 6.1 SRT8 431 hp Petrol
- Inner tie rod Dodge Challenger Coupe 6.1 SRT8 431 hp Petrol
- ABS sensor Dodge Challenger Coupe 6.1 SRT8 431 hp Petrol
- Ball joint Dodge Challenger Coupe 6.1 SRT8 431 hp Petrol
- Suspension bushes CHALLENGER 6.1 SRT8 431 hp Petrol
- Steering knuckle CHALLENGER 6.1 SRT8 431 hp Petrol
- Tyre pressure sensor (TPMS) CHALLENGER 6.1 SRT8 431 hp Petrol
- Anti-roll bar bushes CHALLENGER 6.1 SRT8 431 hp Petrol
- Axle bushes CHALLENGER 6.1 SRT8 431 hp Petrol
- Wheel bolts and wheel nuts CHALLENGER 6.1 SRT8 431 hp Petrol
- Wheel spacers CHALLENGER 6.1 SRT8 431 hp Petrol
- Gearbox mount CHALLENGER 6.1 SRT8 431 hp Petrol
- Steering rack boot CHALLENGER 6.1 SRT8 431 hp Petrol
- Abs ring CHALLENGER 6.1 SRT8 431 hp Petrol
- Anti-roll bar stabiliser kit CHALLENGER 6.1 SRT8 431 hp Petrol
- Wiper and washer system
Sway bar Dodge Challenger Coupe 6.1 SRT8 431 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
DODGE CHALLENGER Coupe 6.1 SRT8 year of manufacture 2007, 431 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front axle both sides
- External Thread [mm]: M 12X1,75
- Length [mm]: 298
- Rod/Strut: Coupling Rod
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Overall Length [mm]: 295
- External Thread [mm]: M10X1,25
- Overall Height [mm]: 54
- Length [mm]: 265
- Rod/Strut: Coupling Rod
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 1035
- Fitting Position: Front Axle
- Stabiliser Diameter [mm]: 23,6
- Supplementary Article / Supplementary Info Info 2: without coupling rod
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 1045
- Fitting Position: Front Axle
- Stabiliser Diameter [mm]: 19
- Supplementary Article / Supplementary Info: with rubber mounts
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Length [mm]: 1140
- Fitting Position: Front Axle
- Stabiliser Diameter [mm]: 25
- Supplementary Article / Supplementary Info: with rubber mounts
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Article / Supplementary Info: with rubber mounts
- Fitting Position: Front Axle
- Length [mm]: 1045
- Stabiliser Diameter [mm]: 22
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Article / Supplementary Info: with rubber mounts
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: with coupling rod
- Stabiliser Diameter [mm]: 19
- for OE number: 204 326 10 65 S1
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Article / Supplementary Info: with rubber mounts
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: with coupling rod
- Stabiliser Diameter [mm]: 22
- for OE number: 1K0 511 409 CB S1
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle, Left, Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 358
- Height [mm]: 68
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Width [mm]: 60
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 23,6
- Weight [kg]: 3,2
- Length [mm]: 1035
- Required quantity: 1
- Fitting Position: Front axle both sides
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Article / Supplementary Info: with rubber mounts
- Supplementary Info: OE Turbo NEW
- Fitting Position: Front Axle
- Length [mm]: 950
- Supplementary Article / Supplementary Info Info 2: with coupling rod
- Stabiliser Diameter [mm]: 19
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear
- Weight [kg]: 1,12
- Packaging length [cm]: 102,0
- Packaging width [cm]: 18,0
- Packaging height [cm]: 4,0
- Condition: New
Over 100 in stock
