Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Spark plugs Nubira J150 1.6 16V 106 hp Petrol
Article №: 686S0009
Details
-
- Construction Year from: 10/1999
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0002
Details
-
- Construction Year from: 10/1999
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£2,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0081
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: Connector Type SAE, with gasket seat
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Tightening angle [degrees]: 90
- Condition: New
More
£4,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0063
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0030
Details
-
- Construction Year from: 10/1999
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Required quantity: 4
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Spark Plug: Iridium Middle Electrode, Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0065
Details
-
- Construction Year from: 10/1999
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£9,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0064
Details
-
- Construction Year from: 10/1999
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£11,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0066
Details
-
- Construction Year from: 10/1999
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£14,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0326
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Tightening angle [degrees]: 90
- Condition: New
More
£19,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990008
Details
-
- Construction Year from: 10/1999
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990001
Details
-
- Construction Year from: 10/1999
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£2,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 235 666
FR 7 D+, Blister N01 - FR 7 DC
Details
-
- Construction Year from: 10/1999
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£2,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0002P
Details
-
- Construction Year from: 10/1999
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£2,76
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0009P
Details
-
- Construction Year from: 10/1999
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£2,84
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 235 667
FR 7 DCX+, Blister N06 - FR 7 DCX
Details
-
- Construction Year from: 10/1999
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: OE039/T10
RC9YC4, OE039
Details
- Product line: Powersport
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Required quantity: 4
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RC9YC4
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 9
- Projection [mm]: 1,5
- Condition: New
More
£3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCF860001
Details
-
- Construction Year from: 10/1999
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCF860004
Details
-
- Construction Year from: 10/1999
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£4,52
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8EH 188 705-071
PM8RC-10
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1,0
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1.25
- Tightening Torque [Nm]: 25
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 232 502
FR 78 X
Details
-
- Construction Year from: 10/1999
- Required quantity: 4
- Supplementary Info: Super 4
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Condition: New
More
£6,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0081P
Details
-
- Construction Year from: 10/1999
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Condition: New
More
£6,23
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990062
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990064
Details
-
- Construction Year from: 10/1999
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£9,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0065P
Details
-
- Construction Year from: 10/1999
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£11,04
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0066P
Details
-
- Construction Year from: 10/1999
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£16,55
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 40 products
