Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Heating and ventilation
-
Ignition and preheating
- Spark plugs Daewoo Lanos KLAT 1.5 97 hp Petrol
- Ignition coil Daewoo Lanos KLAT 1.5 97 hp Petrol
- Ignition leads Daewoo Lanos KLAT 1.5 97 hp Petrol
- Interior
- Lighting
- Pipes and hoses
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Spark plugs Daewoo Lanos KLAT 1.5 97 hp Petrol
Article №: 686S0010
Details
-
- Construction Year to: 04/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0011
Details
-
- electrode gap to be set [mm]: 0,9
- Construction Year to: 04/2000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0310
Details
-
- electrode gap to be set [mm]: 0,9
- Construction Year to: 04/2000
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0069
Details
-
- Construction Year to: 04/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0070
Details
-
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£11,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990010
Details
-
- electrode gap to be set [mm]: 0,9
- Construction Year to: 04/2000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0011P
Details
-
- electrode gap to be set [mm]: 0,9
- Construction Year to: 04/2000
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£2,74
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0010P
Details
-
- Construction Year to: 04/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£3,00
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 235 663
Set 4 - 0 242 235 909, Blister N02 - WR 7 DC
Details
-
- Construction Year to: 04/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 229 656
Set 4 - 0 242 229 880, Blister N07 - WR 8 DC
Details
-
- electrode gap to be set [mm]: 0,9
- Construction Year to: 04/2000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: OE006/T10
RN9YC, OE006
Details
- Product line: Powersport
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Required quantity: 4
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RN9YC
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 9
- Projection [mm]: 1,5
- Condition: New
More
£3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 232 505
WR 78 X
Details
-
- Construction Year to: 04/2000
- Required quantity: 4
- Supplementary Info: Super 4
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 1,1
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 230 599
6736, WR 8 DPP 30 W
Details
-
- Spark Plug: Control electrode gap
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£5,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 232 504
WR 78
Details
- Supplementary Info: Super 4
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 0,9
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Condition: New
More
£5,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-19990308
Details
-
- electrode gap to be set [mm]: 0,9
- Construction Year to: 04/2000
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0310P
Details
-
- electrode gap to be set [mm]: 0,9
- Construction Year to: 04/2000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£10,95
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 235 909
S1-4
Details
-
- Construction Year to: 04/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£11,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0069P
Details
-
- Construction Year to: 04/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£11,98
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 232 803
503
Details
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 0,9
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Condition: New
More
£16,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 232 804
504
Details
- Supplementary Info: Premium 4
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 1,1
- Spanner Size: 20,8
- Construction Year to: 04/2000
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Condition: New
More
£16,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0070P
Details
-
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£17,97
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990009
Details
-
- Construction Year to: 04/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 242 235 529
Details
-
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£4,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 241 229 574
Details
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,7
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£4,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 242 229 555
WR 8 DP
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£4,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 31 products