Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber DACIA Duster Off-Road 1.5dCi (HSMC) 107 hp Diesel
- Coil spring DACIA Duster Off-Road 1.5dCi (HSMC) 107 hp Diesel
- Top strut mount and bearing DACIA Duster Off-Road 1.5dCi (HSMC) 107 hp Diesel
- Suspension kit, coil springs DACIA Duster Off-Road 1.5dCi (HSMC) 107 hp Diesel
- Shock absorber dust cover and bump stops DACIA Duster Off-Road 1.5dCi (HSMC) 107 hp Diesel
- Suspension kit, shock absorber and coil spring DACIA Duster Off-Road 1.5dCi (HSMC) 107 hp Diesel
- Repair kit, wheel suspension DACIA Duster Off-Road 1.5dCi (HSMC) 107 hp Diesel
- Spring cap DACIA Duster Off-Road 1.5dCi (HSMC) 107 hp Diesel
- Hydraulic oil DACIA Duster Off-Road 1.5dCi (HSMC) 107 hp Diesel
- Camber bolts DACIA Duster Off-Road 1.5dCi (HSMC) 107 hp Diesel
- Mounting, shock absorbers DUSTER 1.5dCi (HSMC) 107 hp Diesel
- Shock absorber mounting brackets DUSTER 1.5dCi (HSMC) 107 hp Diesel
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Suspension kit, shock absorber and coil spring DACIA Duster Off-Road 1.5 dCi (HSMC) 107 hp Diesel
Article №: MNE1185N0268
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£85,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: KYB1185N0049
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: MNE1185N0038
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Supplementary Article / Supplementary Info Info 2: with bearing(s), with mounting parts
- Condition: New
More
Article №: E90-26-003-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Axle Load front axle to [kg]: 1040
- Axle Load rear axle to [kg]: 1010
- Suspension: for vehicles without electronic suspension control
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: 46-206671
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1020
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1010
- Lowered Suspension ca. [mm]: 30
-
- Registration Type: Conditions see certificate
- Shock Absorber Type: Gas Pressure
- Product line: - B12 Pro-Kit
- Condition: New
More
You may also be interested in
Article №: SA1185N0044
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£102,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1120-5262
Details
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- for RPO number: DQ025
- Condition: New
More
Article №: E90-20-007-06-22
Details
- Suspension Strut Outer Diameter [mm]: 51
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 865
- Axle Load rear axle to [kg]: 945
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: E90-20-007-02-22
Details
- Suspension Strut Outer Diameter [mm]: 51
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 805
- Axle Load rear axle to [kg]: 905
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: 1120-4851
Details
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- Condition: New
More
Article №: 46-180537
Details
- Shock Absorber Type: Gas Pressure
- Product line: - B12 Pro-Kit
- Condition: New
More
Article №: 40932
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Quantity Unit: Set
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Supplementary Article / Supplementary Info Info 2: with protective cap/bellow
- Required quantity: 1
- Condition: New
More
£104,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1120-9011
Details
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- Condition: New
More
Article №: C-3697
Details
- Fitting Position: Rear, Rear Axle
- Manufactured in: USA
- Packaging length [cm]: 51,0
- Packaging width [cm]: 33,0
- Packaging height [cm]: 18,0
- Weight [kg]: 8,9
- Net weight [kg]: 7,9
- without ECE/ABE approval
- Condition: New
More
Article №: 40663-1
Details
- for components see parts list
- Follow installation instructions
- Condition: New
More
Article №: E90-20-031-01-22
Details
- Registration Type: with General Operating Permit (ABE)
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 965
- Axle Load rear axle to [kg]: 1255
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: 1140-9761
Details
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: Twin-Tube, adjustable
- for RPO number: DQ091
- Condition: New
More
Article №: 31037-3
Details
- for components see parts list
- Lowered front axle [mm]: 60
- Lowered rear axle [mm]: 40
- Axle Load front axle to [kg]: 950
- Registration Type: with TÜV® certificate
- Vehicle Equipment: for vehicles without level control
- Follow installation instructions
- Condition: New
More
Article №: 35379-1
Details
- for components see parts list
- Quantity Unit: Kit
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Spring Design: Coil Spring
- Lowered front axle [mm]: 40-70
- Lowered rear axle [mm]: 30-60
- Vehicle type: 6L, 6Y, 5J, 5Z, 9N
- Follow installation instructions
- Condition: New
More
Inside the package:
More
Article №: PSS65-20-014-02-22
Details
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Lowered Suspension ca. [mm]: 30-60
- Axle Load front axle to [kg]: 1090
- Axle Load rear axle to [kg]: 1200
- Vehicle Equipment: for vehicles without level control
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
Article №: 35819-1
Details
- for components see parts list
- Quantity Unit: Kit
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Spring Design: Coil Spring
- Lowered front axle [mm]: 50-70
- Lowered rear axle [mm]: 40-70
- Vehicle type: 17, 155, 17CK, 53+53B
- Follow installation instructions
- Condition: New
More
Inside the package:
- Coil spring 2
- Coil spring 2
- Coil spring 2
- Shock absorber 2
- Shock absorber 2
More
Article №: 35865-1
Details
- for components see parts list
- Lowered front axle from [mm]: 40
- Lowered front axle to [mm]: 70
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- Registration Type: with TÜV® certificate
- Quantity Unit: Kit
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Spring Design: Coil Spring
- Lowered front axle [mm]: 40-70
- Lowered rear axle [mm]: 30-60
- Vehicle type: 19E, 1HXO, 1H, 1EXO, 1E, 1HXOF
- Follow installation instructions
- Condition: New
More
Inside the package:
More
Article №: 40540-2
Details
- for components see parts list
- Follow installation instructions
- Condition: New
More
Article №: 29225-3
Details
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Monotube
- Spring Design: Coil Spring
- Lowered front axle [mm]: 50-80
- Lowered rear axle [mm]: 50-70
- Suspension Strut Outer Diameter [mm]: 55
- Vehicle type: 8P, 5P, 5PN, 1K, 1KM
- Follow installation instructions
- Condition: New
More
Article №: 1120-9271
Details
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- Condition: New
More
