Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
-
Exhaust
- Lambda sensor Chrysler Sebring JS 2.4 VVT 170 hp Petrol
- Exhaust pipe Chrysler Sebring JS 2.4 VVT 170 hp Petrol
- Exhaust manifold gasket Chrysler Sebring JS 2.4 VVT 170 hp Petrol
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Lambda sensor Chrysler Sebring JS 2.4 VVT 170 hp Petrol
Article №: 3922L0229
Details
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Supplementary Info: Universal
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£21,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0923
Details
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 290
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£24,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0164
Details
-
- Engine Code: ED3
- Fitting Position: Exhaust Manifold
- Oxygen Sensor: Regulating Probe
- Exhaust System: after catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 360
- Number of pins: 4
- Conductor Number: 4
- Connector Shape: rectangular
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£29,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140232
Details
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Supplementary Info: Universal
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£21,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 120-08-060
Details
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 530
- Number of circuits: 4
- Spanner Size: 22
- Connector/Clamp: Connector may need adjustment
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£23,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140073
Details
-
- Engine Code: ED3
- Fitting Position: Exhaust Manifold
- Oxygen Sensor: Regulating Probe
- Exhaust System: after catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 360
- Number of pins: 4
- Conductor Number: 4
- Connector Shape: rectangular
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£29,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 02.39.094
Details
- Oxygen Sensor: Heated
- Cable Length [mm]: 430
- Number of pins: 4
- Number of circuits: 4
- for OE number: 004 542 0718
- External Thread [mm]: M18 x 1,5
- Condition: New
More
£29,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-CH-000
Details
- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position: before catalytic converter
- Fabrication Number: ESL-CH-000
- Condition: New
More
£31,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: P150342
Details
-
- Fitting Position: after catalytic converter
-
- Fitting Position: before catalytic converter
- Oxygen Sensor: Oxygen Sensor
- Condition: New
More
£34,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0164P
Details
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 190
- Number of pins: 4
- Conductor Number: 4
- Connector Shape: rectangular
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£35,19
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0229P
Details
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Supplementary Info: Universal
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 530
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£36,13
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17004
Details
- Oxygen Sensor: Regulating Probe
- Number of circuits: 4
- Condition: New
More
£36,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 258 006 915
Details
-
- Fitting Position: after catalytic converter
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Overall Length [mm]: 343
- Number of circuits: 4
- Recommended change interval [km]: 160000
- Available as universal article as well, see article no.: 0258986602
- Condition: New
More
£36,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GOS-4000E
Details
- Oxygen Sensor: Oxygen Sensor
- Number of circuits: 4
- Weight [kg]: 0,09
- Voltage [V]: 12
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.)
- Condition: New
More
£38,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 33 10 4096
Details
-
- Fitting Position: after catalytic converter
- Oxygen Sensor: Diagnostic Probe
-
- Fitting Position: before catalytic converter
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Heated
- Cable Length [mm]: 503
- Number of circuits: 4
- Weight [kg]: 0,090
- Spanner Size: 22
- External Thread Size: M18x1,5
- Condition: New
More
£43,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 9 7163 1
Details
- Oxygen Sensor: Planar probe
- Cable Length [mm]: 240
- Number of circuits: 4
- Voltage [V]: 12
- Condition: New
More
£45,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 258 986 602
Details
-
- Fitting Position: after catalytic converter
- Oxygen Sensor: Diagnostic Probe
-
- Fitting Position: before catalytic converter
- Oxygen Sensor: Diagnostic Probe
- Number of circuits: 4
- Recommended change interval [km]: 160000
- Connector/Clamp: Connector may need adjustment
- Condition: New
More
£46,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 177400
Details
-
- Fitting Position: after catalytic converter
- Oxygen Sensor: Diagnostic Probe
-
- Fitting Position: before catalytic converter
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Heated
- Cable Length [mm]: 503
- Number of circuits: 4
- Weight [kg]: 0,090
- Spanner Size: 22
- External Thread Size: M18x1,5
- Condition: New
More
£48,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 570112A
Details
- Oxygen Sensor: Oxygen Sensor
- Cable Length [mm]: 290
- Number of circuits: 4
- Alternative Repair Kit: 570112
- Alternatively
- Condition: New
More
£50,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09SKV909
Details
- Oxygen Sensor: Oxygen Sensor
- Number of circuits: 4
- Weight [kg]: 0,09
- Voltage [V]: 12
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.)
- Condition: New
More
£51,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ES20354-12B1
Details
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Planar probe, Heated
- Cable Length [mm]: 514
- Condition: New
More
£53,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DOX-0150
Details
-
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- Exhaust System: for pre-catalytic converter
- Product line: Universal fit
- Oxygen Sensor: Heated, Planar probe, Oxygen Sensor
- Thread Size: M18x1,5, M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Quality: OE
- Weight [g]: 93
- Manufacturer Restriction: DENSO
- Gross Weight [g]: 140
- Condition: New
More
£54,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 59-0014
Details
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: before catalytic converter, after catalytic converter
-
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Finger probe
- Number of circuits: 4
- Transmission Type: Manual Transmission
- Connector/Clamp: Connector may need adjustment
- Condition: New
More
£56,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 81574
Details
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- Cable Length [mm]: 380
- Number of pins: 4
- for OE number: 0045420818
- Condition: New
More
£64,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220005
Details
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Supplementary Info: Universal
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£65,61
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 129 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
