Car part
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Ignition and preheating
- Lighting
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Wheel hub CHRYSLER Pacifica MPV 3.8 214 hp Petrol
- Wheel bearing CHRYSLER Pacifica MPV 3.8 214 hp Petrol
- Top strut mount and bearing CHRYSLER Pacifica MPV 3.8 214 hp Petrol
- Anti-roll bar link CHRYSLER Pacifica MPV 3.8 214 hp Petrol
- Engine mount CHRYSLER Pacifica MPV 3.8 214 hp Petrol
- Track rod end CHRYSLER Pacifica MPV 3.8 214 hp Petrol
- Inner tie rod CHRYSLER Pacifica MPV 3.8 214 hp Petrol
- ABS sensor CHRYSLER Pacifica MPV 3.8 214 hp Petrol
- Ball joint CHRYSLER Pacifica MPV 3.8 214 hp Petrol
- Suspension bushes CHRYSLER Pacifica MPV 3.8 214 hp Petrol
- Shock absorber dust cover and bump stops PACIFICA 3.8 214 hp Petrol
- Anti-roll bar bushes PACIFICA 3.8 214 hp Petrol
- Wheel bolts and wheel nuts PACIFICA 3.8 214 hp Petrol
- Wheel nuts PACIFICA 3.8 214 hp Petrol
- Towbar / parts
- Wiper and washer system
Wheel bearing CHRYSLER Pacifica MPV 3.8 214 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
CHRYSLER Pacifica MPV 3.8 year of manufacture 2004, 214 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Weight [kg]: 3,6
- Packaging length [cm]: 14,1
- Packaging width [cm]: 14,1
- Packaging height [cm]: 10,4
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 168
- Weight [kg]: 4,85
- Number of Holes: 5
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle, Right
- Number of Teeth: 26
- Number of Teeth on input shaft: 26
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Height 1 [mm]: 60,8
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
- Diameter [mm]: 116,5
- Weight [kg]: 1,19
- Inner Diameter 2 [mm]: 30
- Packing Type: Box
- Packaging length [cm]: 15
- Packaging width [cm]: 14,5
- Packaging height [cm]: 9,5
- Condition: New
Over 100 in stock
-47%
compared to RRP:
£36,99
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 37
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring, with retaining ring, with ABS sensor ring
- Supplementary Article / Supplementary Info: with axle nut
- Diameter [mm]: 72
- Width [mm]: 37
- Observe service information
- Bearing Type: Angular Ball Bearing
- Sealing lip material: NBR (nitrile butadiene rubber)
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Inner Diameter [mm]: 42
- Diameter [mm]: 76
- Width [mm]: 39
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Article / Supplementary Info: Photo corresponds to scope of supply
- Diameter [mm]: 45,2
- Inner Diameter 2 [mm]: 22, 35
- Width 2 [mm]: 15,9
- Width 1 [mm]: 16,6
- Outer Diameter 2 [mm]: 60
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Info: EXPERT KITS +
- Fitting Position: Front Axle Left, Front Axle Right
- Weight [kg]: 0,533
- Packaging height [cm]: 9
- Packaging Depth [cm]: 14,8
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle both sides
- Supplementary Article / Supplementary Info Info 2: with ABS sensor ring
- Rim Hole Number: 5
- Flange Diameter [mm]: 136
- Condition: New
Over 100 in stock
-34%
compared to RRP:
£46,28
incl. 20% VAT, excl. delivery costs
- Supplementary Info: ORIGINAL Quality
- Inner Diameter [mm]: 30
- Supplementary Article / Supplementary Info Info 2: with integrated wheel bearing, with integrated magnetic sensor ring
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Diameter [mm]: 117
- Bolt Hole Circle Ø [mm]: 98
- Rim Hole Number: 4
- Bearing Type: Ball Bearing
- Number of Teeth, ABS ring: 96
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Supplementary Article / Supplementary Info: with accessories, with Split Pin
- Diameter [mm]: 80
- Inner Diameter 2 [mm]: 43
- Width 1 [mm]: 40
- Number of Teeth, ABS ring: 86
- Condition: New
Over 100 in stock
-28%
compared to RRP:
£114,99
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 32
- Supplementary Article / Supplementary Info Info 2: Wheel Bearing integrated into wheel hub, with integrated ABS sensor
- Diameter [mm]: 85, 72
- Width [mm]: 48
- Weight [kg]: 4,510
- Bearing Type: Tapered Roller Bearing
- Outer Diameter 2 [mm]: 162
- Condition: New
Over 100 in stock
