Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Chevrolet Trax 1.4AWD 140 hp Petrol
- Brake pads Chevrolet Trax 1.4AWD 140 hp Petrol
- Brake caliper Chevrolet Trax 1.4AWD 140 hp Petrol
- ABS sensor Chevrolet Trax 1.4AWD 140 hp Petrol
- Brake caliper repair kit Chevrolet Trax 1.4AWD 140 hp Petrol
- Handbrake Chevrolet Trax 1.4AWD 140 hp Petrol
- Master cylinder Chevrolet Trax 1.4AWD 140 hp Petrol
- Brake caliper carrier Chevrolet Trax 1.4AWD 140 hp Petrol
- Brake hose Chevrolet Trax 1.4AWD 140 hp Petrol
- Handbrake cable Chevrolet Trax 1.4AWD 140 hp Petrol
- Guide sleeve kit, brake caliper TRAX 1.4AWD 140 hp Petrol
- Brake fluid TRAX 1.4AWD 140 hp Petrol
- Brake pad fitting kit TRAX 1.4AWD 140 hp Petrol
- Brake pads and discs TRAX 1.4AWD 140 hp Petrol
- Brake light switch TRAX 1.4AWD 140 hp Petrol
- Brake caliper piston TRAX 1.4AWD 140 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Chevrolet Trax 1.4 AWD 140 hp Petrol
Article №: 82B0479
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 14,3
- Bolt Hole Circle Ø [mm]: 105
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60,1
- Inner Diameter [mm]: 147
- Height [mm]: 45
- Surface: Coated
- Tightening Torque [Nm]: 110
- Material: Cast Iron
- Bore Diameter [mm]: 14,3
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
£ 26,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0953
Details
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 14,3
- Bolt Hole Circle Ø [mm]: 105
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 60
- Inner Diameter [mm]: 149
- Height [mm]: 45,5
- Surface: Uncoated
- Material: Cast Iron
- Bore Diameter [mm]: 14,3
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
£ 40,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BDC5935
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 105
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Height [mm]: 45,1
- Drilled: no
- Condition: New
More
Article №: SKBD-0022194
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 14,3
- Bolt Hole Circle Ø [mm]: 105
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60,1
- Inner Diameter [mm]: 147
- Height [mm]: 45
- Surface: Uncoated
- Tightening Torque [Nm]: 110
- Material: Cast Iron
- Bore Diameter [mm]: 14,3
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
£ 26,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562651JC
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Number of Holes: 5
- Hole Arrangement/Number: 5+1
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Height [mm]: 45
- Weight [kg]: 9,85
- Surface: Coated
- Tightening Torque [Nm]: 110
- Version: JC
- Test Mark: R90 Homologated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 28
- Packaging width [cm]: 28
- Packaging height [cm]: 12
- Drilled: no
- Condition: New
More
£ 26,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 39185
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 105
- Thickness [mm]: 45,1
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Weight [kg]: 4,74
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£ 26,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0479P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Height [mm]: 45
- Surface: Coated
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- usable for vehicles to construction year: 2016/11
- Condition: New
More
£ 30,95
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF1872C
Details
- Product line: PREMIER Coat+ disc
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Height [mm]: 45
- Weight [kg]: 9,85
- Surface: Coated
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packaging length [cm]: 28
- Packaging width [cm]: 28
- Packaging height [cm]: 11,2
- Drilled: no
- Condition: New
More
£ 30,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADG043164
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 105
- Thickness [mm]: 45
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Weight [kg]: 4,74
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£ 32,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V40-40019
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Rim Hole Number: 5
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Hub Diameter 1 [mm]: 60
- Height [mm]: 45
- Weight [kg]: 5,15
- fulfils ECE norm: R90
- Drilled: no
- Condition: New
More
£ 33,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 231-04-103
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 105
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 60
- Height [mm]: 44,9
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£ 33,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24011201881-PCS-MS
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 105
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Inner Diameter [mm]: 147
- Height [mm]: 44,9
- Required quantity: 2
- Bore Diameter [mm]: 14,2
- Net weight [kg]: 4,7
- Gross Weight [kg]: 4,9
- Drilled: no
- Condition: New
More
£ 33,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 40H0012-OYO
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 105
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 60
- Height [mm]: 45,1
- Surface: Coated
- Thread Size: 14,3
- Contact surface: Coated
- Housing Surface: Coated
- Glove Outer Surface: Coated
- Hammer Face Surface (square side): Coated
- Hammer Face Surface: Coated
- Hammer Peen Surface: Coated
- Hammer Face Surface (round side): Coated
- Pliers head surface: Coated
- Tool handle surface: Coated
- Glove Inner Surface: Coated
- Blade surface: Coated
- Jaw Surface: Coated
- Hammer Head Surface: Coated
- Frame surface: Coated
- Shaft surface: Coated
- Drill Surface: Coated
- Blade tip surface: Coated
- Cutting Surface: Coated
- Working Ends Surface: Coated
- Drilled: no
- Condition: New
More
£ 34,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1263106800
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 35,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 18035
Details
-
- Fitting Position: Rear Axle
- Rim Size [inch]: 15.0
- Vehicle type: Tracker
-
- Fitting Position: Rear Axle
- Vehicle type: Trax
- Product line: COATED
- Diameter [mm]: 268
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 105
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Hub Diameter [mm]: 159
- Height [mm]: 45
- Weight [kg]: 4,76
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 35,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-2333
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 105
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Height [mm]: 45,1
- Surface: Painted
- Test Mark: E1 90R 02C0190/0535
- Drilled: no
- Condition: New
More
£ 36,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-1002C
Details
-
- Fitting Position: Rear Axle
- Construction Year from: 01/2013
- Diameter [mm]: 268,0
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12,0
- Minimum thickness [mm]: 10,0
- Centering Diameter [mm]: 60,0
- Height [mm]: 45
- Surface: Painted
- Test Mark: ECE-R90, ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 38,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: O1038P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Height [mm]: 45,1
- Drilled: no
- Condition: New
More
£ 39,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: TX 72-65
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 105
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Height [mm]: 45,1
- Weight [kg]: 9,95
- Surface: Painted
- Drilled: no
- Condition: New
More
£ 40,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 25858
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Height [mm]: 45
- Drilled: no
- Condition: New
More
£ 40,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B130641
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 105
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10,0
- Centering Diameter [mm]: 60
- Inner Diameter [mm]: 147,0
- Height [mm]: 44,9
- Bore Diameter [mm]: 14,2
- Drilled: no
- Condition: New
More
£ 42,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 61-0W-W06
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 60
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Height [mm]: 46
- Tightening Torque [Nm]: 110
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 42,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0023103
Details
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 14,3
- Bolt Hole Circle Ø [mm]: 105
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 60
- Inner Diameter [mm]: 149
- Height [mm]: 45,5
- Surface: Uncoated
- Material: Cast Iron
- Bore Diameter [mm]: 14,3
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
£ 43,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-2204
Details
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 105
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 60
- Height [mm]: 45,5
- Surface: Painted
- Thread Size 1: 14,3
- Thread Size 2: 8,4
- Drilled: no
- Condition: New
More
£ 50,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 231-03-197
Details
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 105
- Brake Disc Thickness [mm]: 26
- Centering Diameter [mm]: 60
- Height [mm]: 45,2
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£ 51,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 208 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
