Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Chevrolet Lacetti J200 Estate 1.8 122 hp Petrol
- Brake pads Chevrolet Lacetti J200 Estate 1.8 122 hp Petrol
- Brake caliper Chevrolet Lacetti J200 Estate 1.8 122 hp Petrol
- Drum brake Chevrolet Lacetti J200 Estate 1.8 122 hp Petrol
- ABS sensor Chevrolet Lacetti J200 Estate 1.8 122 hp Petrol
- Brake caliper repair kit Chevrolet Lacetti J200 Estate 1.8 122 hp Petrol
- Handbrake Chevrolet Lacetti J200 Estate 1.8 122 hp Petrol
- Brake caliper carrier Chevrolet Lacetti J200 Estate 1.8 122 hp Petrol
- Brake shoes Chevrolet Lacetti J200 Estate 1.8 122 hp Petrol
- Brake hose Chevrolet Lacetti J200 Estate 1.8 122 hp Petrol
- Brake drum LACETTI 1.8 122 hp Petrol
- Master cylinder LACETTI 1.8 122 hp Petrol
- Handbrake cable LACETTI 1.8 122 hp Petrol
- Guide sleeve kit, brake caliper LACETTI 1.8 122 hp Petrol
- Brake fluid LACETTI 1.8 122 hp Petrol
- Handbrake shoes LACETTI 1.8 122 hp Petrol
- Brake pad fitting kit LACETTI 1.8 122 hp Petrol
- Wheel cylinder LACETTI 1.8 122 hp Petrol
- Accessory kit, brake shoes LACETTI 1.8 122 hp Petrol
- Brake pads and discs LACETTI 1.8 122 hp Petrol
- Brake light switch LACETTI 1.8 122 hp Petrol
- Brake shoe adjuster LACETTI 1.8 122 hp Petrol
- Abs ring LACETTI 1.8 122 hp Petrol
- Brake caliper piston LACETTI 1.8 122 hp Petrol
- Abs pump LACETTI 1.8 122 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Chevrolet Lacetti J200 Estate 1.8 122 hp Petrol
Article №: 82B0074
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 257,8
- Brake Disc Type: solid
- Number of Holes: 4/7
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 60
- Height [mm]: 57,5
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-65%
compared to RRP:
£37,40
£12,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0232
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256,3
- Brake Disc Type: Vented
- Number of Holes: 4/5
- Wheel Bolt Bore Diameter [mm]: 12,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Height [mm]: 47,2
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-65%
compared to RRP:
£43,40
£15,04
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V51-40004
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 60
- Height [mm]: 57,2
- Brake Disc Hub Height [mm]: 46,5
- Packaging width [cm]: 26
- Packaging height [cm]: 12
- Packaging Depth [cm]: 26
- Drilled: no
- Condition: New
More
£14,18
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0020237
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256,3
- Brake Disc Type: Vented
- Number of Holes: 4/5
- Wheel Bolt Bore Diameter [mm]: 12,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Height [mm]: 47,2
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-62%
compared to RRP:
£43,40
£16,33
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V51-80004
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 21
- Centering Diameter [mm]: 60
- Height [mm]: 46,8
- Weight [kg]: 5,96
- Brake Disc Hub Height [mm]: 23
- Packaging width [cm]: 26
- Packaging height [cm]: 10
- Packaging Depth [cm]: 26
- Drilled: no
- Condition: New
More
£16,76
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562740CH
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10,6
- Minimum thickness [mm]: 9,5
- Centering Diameter [mm]: 60
- Height [mm]: 57,5
- Weight [kg]: 8,76
- Tightening Torque [Nm]: 100
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 25,9
- Packaging width [cm]: 25,9
- Packaging height [cm]: 11,8
- Drilled: no
- Condition: New
More
£19,34
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17686
Details
- Product line: COATED
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 60
- Hub Diameter [mm]: 182
- Height [mm]: 57,5
- Weight [kg]: 4,25
- Surface: Coated
- Drilled: no
- Condition: New
More
-64%
compared to RRP:
£60,13
£21,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 108451
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 58
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 60
- Surface: Coated
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
-61%
compared to RRP:
£55,98
£21,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF1606C
Details
- Product line: PREMIER
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10,6
- Minimum thickness [mm]: 9,5
- Centering Diameter [mm]: 60
- Height [mm]: 57,5
- Weight [kg]: 4,38
- Surface: Coated
- Tightening Torque [Nm]: 100
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packaging length [cm]: 25,5
- Packaging width [cm]: 25,5
- Packaging height [cm]: 8,5
- Drilled: no
- Condition: New
More
£22,78
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADG04362
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 58
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 60
- Surface: Coated
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
£23,21
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562740JC
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 4
- Hole Arrangement/Number: 4+2
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10,6
- Minimum thickness [mm]: 9,5
- Centering Diameter [mm]: 60
- Height [mm]: 57,5
- Weight [kg]: 8,76
- Surface: Coated
- Tightening Torque [Nm]: 100
- Version: JC
- Test Mark: R90 Homologated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging width [cm]: 28
- Packaging height [cm]: 13,5
- Drilled: no
- Condition: New
More
-74%
compared to RRP:
£92,74
£23,21
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6876.00
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 257,8, 258
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 60
- Height [mm]: 57,5
- Weight [kg]: 4,25
- Test Mark: K.B.A.: 61210
- Drilled: no
- Condition: New
More
£24,50
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24011003401-PCS-MS
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 4
- Construction Year to: 12/2010
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 60
- Inner Diameter [mm]: 168
- Height [mm]: 57,2
- Required quantity: 2
- Bore Diameter [mm]: 12,6
- Net weight [kg]: 4,26
- Gross Weight [kg]: 4,50
- Drilled: no
- Condition: New
More
-26%
compared to RRP:
£34,48
£25,36
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6058509
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10,5
- Centering Diameter [mm]: 60
- Height [mm]: 57,2
- Production Number: K6058509
- Drilled: no
- Condition: New
More
£25,79
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3263200200
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10,5
- Drilled: no
- Condition: New
More
-36%
compared to RRP:
£42,72
£27,08
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-1196
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 60
- Height [mm]: 57,5
- Surface: Painted
- Test Mark: E1 90R 02 C0204/0283
- Drum diameter [mm]: 168
- Drilled: no
- Condition: New
More
£27,51
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: D4000P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 59,5
- Height [mm]: 57,9
- Drilled: no
- Condition: New
More
£29,66
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BR-1215-C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 11
- Centering Diameter [mm]: 60
- Hub Diameter 1 [mm]: 60
- Hub Diameter 2 [mm]: 181
- Height [mm]: 58
- Surface: Coated
- Test Mark: R90
- Drilled: no
- Condition: New
More
£29,66
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-3355
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114, 114,3
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 60
- Height [mm]: 47,2
- Surface: Painted
- Test Mark: E1 90R 02 C0176/0531
- Drilled: no
- Condition: New
More
£30,09
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-2255
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 60
- Height [mm]: 47,2
- Technical Information Number: 98200 1335 0 1
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 30
- Packaging width [cm]: 28,5
- Packaging height [cm]: 11,5
- Drilled: no
- Condition: New
More
£30,52
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD4400
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 60
- Height [mm]: 57,5
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 30
- Packaging width [cm]: 28,5
- Packaging height [cm]: 15
- Drilled: no
- Condition: New
More
£30,52
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24012401991-PCS-MS
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Construction Year to: 12/2010
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 21
- Centering Diameter [mm]: 60
- Inner Diameter [mm]: 141
- Height [mm]: 46,8
- Required quantity: 2
- Bore Diameter [mm]: 12,6
- Net weight [kg]: 5,50
- Gross Weight [kg]: 5,50
- Drilled: no
- Condition: New
More
-27%
compared to RRP:
£41,92
£30,52
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BDC5558
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 60
- Height [mm]: 57,5
- Drilled: no
- Condition: New
More
-71%
compared to RRP:
£113,56
£32,24
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6363100300
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 24
- Height [mm]: 48
- Surface: Coated
- Condition: New
More
-28%
compared to RRP:
£45,73
£32,67
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 103168
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 4
- Construction Year to: 12/2010
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 11
- Centering Diameter [mm]: 60
- Height [mm]: 57
- Surface: Coated
- Drilled: no
- Condition: New
More
£33,53
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 130 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
