Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs CHEVROLET Evanda Saloon (V200) 2.0 131 hp Petrol
- Brake pads CHEVROLET Evanda Saloon (V200) 2.0 131 hp Petrol
- Brake caliper CHEVROLET Evanda Saloon (V200) 2.0 131 hp Petrol
- Drum brake CHEVROLET Evanda Saloon (V200) 2.0 131 hp Petrol
- ABS sensor CHEVROLET Evanda Saloon (V200) 2.0 131 hp Petrol
- Brake caliper repair kit CHEVROLET Evanda Saloon (V200) 2.0 131 hp Petrol
- Handbrake CHEVROLET Evanda Saloon (V200) 2.0 131 hp Petrol
- Brake caliper carrier CHEVROLET Evanda Saloon (V200) 2.0 131 hp Petrol
- Brake shoes CHEVROLET Evanda Saloon (V200) 2.0 131 hp Petrol
- Brake hose CHEVROLET Evanda Saloon (V200) 2.0 131 hp Petrol
- Master cylinder EVANDA 2.0 131 hp Petrol
- Handbrake cable EVANDA 2.0 131 hp Petrol
- Guide sleeve kit, brake caliper EVANDA 2.0 131 hp Petrol
- Brake fluid EVANDA 2.0 131 hp Petrol
- Handbrake shoes EVANDA 2.0 131 hp Petrol
- Brake pad fitting kit EVANDA 2.0 131 hp Petrol
- Accessory kit, brake shoes EVANDA 2.0 131 hp Petrol
- Brake pads and discs EVANDA 2.0 131 hp Petrol
- Brake light switch EVANDA 2.0 131 hp Petrol
- Abs ring EVANDA 2.0 131 hp Petrol
- Brake caliper piston EVANDA 2.0 131 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs CHEVROLET Evanda Saloon (V200) 2.0 131 hp Petrol
Article №: 61W02C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 257,6
- Brake Disc Type: solid
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 60
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10,5
- Height [mm]: 58,2
- Surface: Painted
- for OE number: 96389659
- Drilled: no
- Condition: New
More
£31,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 C01
Details
-
- Construction Year to: 09/2006
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 60
- Height [mm]: 47,2
- Surface: Coated
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,6
- Drilled: no
- Condition: New
More
£32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG4194
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Height [mm]: 58
- Surface: Oiled
- Test Mark: E1 90R-02C0241/1591
- Drilled: no
- Condition: New
More
£33,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08.E764.11
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Height [mm]: 58
- Surface: Coated
- Condition: New
More
£34,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF1257C
Details
- Product line: PREMIER
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 60
- Height [mm]: 47,5
- Weight [kg]: 11,04
- Surface: Coated
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packaging length [cm]: 27,5
- Packaging width [cm]: 27,5
- Packaging height [cm]: 11,5
- Drilled: no
- Condition: New
More
£34,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF1944C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 276
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10,5
- Centering Diameter [mm]: 60
- Height [mm]: 58,5
- Weight [kg]: 9,68
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Drilled: no
- Condition: New
More
£35,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.9483.11
Details
- Product line: Prime
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 60
- Height [mm]: 48
- Surface: Coated
- Tightening Torque [Nm]: 110
- Drilled: no
- Condition: New
More
£36,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562879JC
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 276
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Height [mm]: 58,2
- Surface: Coated
- Version: JC
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 29
- Packaging width [cm]: 29
- Packaging height [cm]: 14,5
- Drilled: no
- Condition: New
More
£37,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92133500
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 04/05
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 60
- Inner Diameter [mm]: 141
- Height [mm]: 47,2
- Weight [kg]: 5,5
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 27,8
- Packaging width [cm]: 27,8
- Packaging height [cm]: 12,2
- Drilled: no
- Condition: New
More
£37,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 328
Details
-
- Construction Year to: 09/2006
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 60
- Height [mm]: 47,2
- Surface: Oiled
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,6
- Drilled: no
- Condition: New
More
£37,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BR-1217
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Hub Diameter 1 [mm]: 60
- Hub Diameter 2 [mm]: 180
- Height [mm]: 58
- Drilled: no
- Condition: New
More
£43,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 60W09C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 60
- Brake Disc Thickness [mm]: 24,2
- Minimum thickness [mm]: 22
- Height [mm]: 47,2
- Surface: Painted
- Tightening Torque [Nm]: 110
- Test Mark: ECE R90 APPROVED
- for OE number: 96328338
- Drilled: no
- Condition: New
More
£44,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0124-0199.1
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24,0
- Minimum thickness [mm]: 21,0
- Centering Diameter [mm]: 60,0
- Inner Diameter [mm]: 141,0
- Height [mm]: 46,8
- Surface: Coated
- MAPP code available
- Test Mark: E1 90R-02C0115/0216
- Bore Diameter [mm]: 12,6
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£45,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 185.3953.20
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Rim Hole Number: 4
- Hole Arrangement/Number: 5/4
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 21,0
- Centering Diameter [mm]: 60
- Height [mm]: 47
- Weight [kg]: 5,4
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£48,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 197366
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Construction Year to: 06/2007
- Rim Hole Number: 4
- Brake Disc Thickness [mm]: 24,1
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 60
- Height [mm]: 46,9
- Weight [kg]: 5,8
- Number of mounting bores: 2
- No. of holes 1: 1
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with screw
- Drilled: no
- Condition: New
More
£52,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6959.10
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 60
- Height [mm]: 47,2
- Weight [kg]: 5,6
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£53,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6656.10
Details
- Fitting Position: Front Axle
- Diameter [mm]: 255,8, 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 60
- Height [mm]: 47,2
- Weight [kg]: 5,33
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£61,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BS-9456C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Hole Arrangement/Number: 4/6
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Inner Diameter [mm]: 168
- Height [mm]: 58
- Weight [kg]: 4,7
- Bore Diameter [mm]: 12,6
- Drilled: no
- Condition: New
More
£111,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BS-8130C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Hole Arrangement/Number: 4/7
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 60
- Height [mm]: 47
- Surface: Coated
- Drilled: no
- Condition: New
More
£131,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0676
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 257,9
- Brake Disc Type: solid
- Number of Holes: 4/6
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 60
- Height [mm]: 58
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£28,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 3263100409
Details
- Supplementary Info: QH
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Hole Arrangement/Number: 5/4
- Brake Disc Thickness [mm]: 24
- Drilled: no
- Condition: New
More
£16,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 19-2223
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 60
- Height [mm]: 58
- Required quantity: 2
- Drilled: no
- Condition: New
More
£18,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 40H0006-JPN
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Rim Hole Number: 4
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 60, 60,0
- Hub Diameter [mm]: 60
- Height [mm]: 58
- Drilled: no
- Condition: New
More
£18,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: S6048360
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 60
- Height [mm]: 47,2
- Weight [kg]: 5,6
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£24,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SKBD-0022826
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 257,9
- Brake Disc Type: solid
- Number of Holes: 4/6
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 60
- Height [mm]: 58
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£25,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 134 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
