-
Bestsellers
-
Belts, chains, rollers
-
Body
-
Brakes
-
Damping
-
Electrics
-
Engine
-
Engine cooling system
-
Exhaust
-
Filters
-
Gaskets and sealing rings
-
Ignition and preheating
-
Oils and fluids
-
Repair kits
-
Sensors, relays, control units
-
Steering
-
Suspension
-
Wiper and washer system
Parts CHEVROLET Camaro II Coupe 5.0 141 hp
-
Shock absorber
-
Air filter
-
Wiper blades
-
Anti-roll bar link
-
Suspension bushes
-
Anti-roll bar bushes
-
Rocker cover gasket
-
Windscreen
-
Exhaust manifold gasket
-
Engine coolant
-
Alternator parts
Belts, chains, rollers
Top
A-Z
-
Freewheel clutch
Body
Top
A-Z
Gaskets and sealing rings
Top
A-Z
-
Rocker cover gasket
-
Exhaust manifold gasket
-
Window seal
-
Door seal
Ignition and preheating
Top
A-Z
-
Ignition leads
Oils and fluids
Top
A-Z
-
Engine coolant
-
Screenwash
Repair kits
Top
A-Z
-
Alternator parts
Sensors, relays, control units
Top
A-Z
-
Tyre pressure sensor (TPMS)
Steering
Top
A-Z
-
Track rod end
Suspension
Top
A-Z
Automotive products for CHEVROLET Camaro II Coupe 5.0 1975 year, 141 hp
incl. 20% VAT, excl. delivery costs
- Thickness 1 [mm]: 44,5
- Inner Diameter 2 [mm]: 22
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Packing Type: Tube
- Contents [g]: 35
- Capacity [ml]: 35
- Colour: transparent
- Chemical Properties: Long-term Protection, high corrosion protection, Heat-resistant, Water-repellent, Saltwater-Resistant, not metalliferous, Silicon-free
- Observe technical data
- Observe mounting information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
-
- Fitting Position: Driver side, Passenger Side
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Specification: Std Hook
- Length [mm]: 450
- Length [inch]: 18
- Weight [g]: 107
- Condition: New
Over 100 in stock

incl. 20% VAT, free delivery
- Voltage [V]: 12
- Battery Capacity [Ah]: 55
- Height [mm]: 186
- Width [mm]: 180
- Length [mm]: 230
- Cold-test Current, EN [A]: 620
- Terminal Type: SAE
- Battery: Lead-acid battery
- Product line: EXCELL
- Hold-down Type: B07
- Post Positions: 1
- Condition: New
Over 100 in stock
-30%
compared to RRP:
£ 22,28
incl. 20% VAT, excl. delivery costs
- Quantity Unit: Kit
- Nominal Size [mm]: 4,5
- Pipe length [mm]: 500
- Material: POM (Polyoxymethylene), Polyamid 6, EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article / Supplementary Info Info 2: with connecting pipe
- Supplementary Article / Supplementary Info: with gaskets/seals
- Packing Type: Blister Pack
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
-
- Fitting Position: Rear Axle
- for model year: 1976
- Diameter [mm]: 29
- Length [mm]: 93
- Weight [kg]: 0,6
- Packaging width [cm]: 9,3
- Packaging height [cm]: 2,8
- Condition: New
Over 100 in stock
-10%
compared to RRP:
£ 116,88
incl. 20% VAT, excl. delivery costs
-
- Fitting Position: Front Axle
- Quantity per axle: 2
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 369
- min. length [mm]: 236
- Colour: red
- adjustable: adjustable
- Packaging length [cm]: 500
- Packaging width [cm]: 85
- Packaging height [cm]: 85
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Rear Axle
- Inner Diameter 2 [mm]: 22, 86
- Length [mm]: 146
- Condition: New
Over 100 in stock

-32%
compared to RRP:
£ 10,00
incl. 20% VAT, excl. delivery costs
- Quality: SL DOT 4
- Capacity [litre]: 0,5
- DOT specification: DOT 4
- Packing Type: Can
- MAPP code available
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Packing Type: Tin
- Capacity [litre]: 1
- Supplementary Article / Supplementary Info Info 2: for hypoid gear transmission
- Oil: Mineral Oil
- Manufacturer recommendations: MIL-L 2105 D
- Oil manufacturer recommendation: DAF, GM B 40 1010, Volvo axle/ltd slip, Volvo 97311, ZF TE-ML 05C, ZF TE-ML 21C
- Oil Viscosity Classification SAE: 85W-90
- Specification: API GL-5
- Product line: Hypoid GL5
- Version: LS
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Inner Diameter [mm]: 28
- Thickness [mm]: 5,3
- Material: HNBR (hydrogenated nitrile butadiene rubber)
- Shape: O-Ring
- Diameter [mm]: 38,6
- Goods tariff number: 3926909985
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Length [mm]: 1125
- Width [mm]: 10
- Outer Length [mm]: 1135
- Tensile Cord Material: Polyester
- Belt Material: Polychloroprene (Neoprene)
- Colour: black
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £ 140 within the UK
Fast delivery