Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
-
Clutch
- Clutch kit Audi TT Roadster 2.0TFSI quattro 200 hp Petrol
- Flywheel Audi TT Roadster 2.0TFSI quattro 200 hp Petrol
- Clutch master cylinder Audi TT Roadster 2.0TFSI quattro 200 hp Petrol
- Clutch slave cylinder Audi TT Roadster 2.0TFSI quattro 200 hp Petrol
- Central slave cylinder Audi TT Roadster 2.0TFSI quattro 200 hp Petrol
- Flywheel bolt Audi TT Roadster 2.0TFSI quattro 200 hp Petrol
- Pedals and pedal covers Audi TT Roadster 2.0TFSI quattro 200 hp Petrol
- Clutch switch Audi TT Roadster 2.0TFSI quattro 200 hp Petrol
- Sleeve Audi TT Roadster 2.0TFSI quattro 200 hp Petrol
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Clutch kit Audi TT Roadster 2.0 TFSI quattro 200 hp Petrol
Article №: KE-VW21R
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Manufacturer Restriction: LUK
- Condition: New
More
Article №: F1W033NX
Details
-
- TecDoc Engine Number: CCZA
- Transmission Type: 6-Speed Dual-Clutch Transmission
- Diameter [mm]: 240
- Number of Teeth: 23
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: MK10031D
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Clutch: for vehicles with hydraulic clutch control
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
£112,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: J2000801
Details
-
- TecDoc Engine Number: CCZA
- Transmission Type: 6-Speed Dual-Clutch Transmission
- Number of Teeth: 23
- Friction Lining Outer Diameter [mm]: 240
- Number of Parts [parts]: 2
- Condition: New
More
You may also be interested in
Article №: 600 0017 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
More
Article №: 600 0295 00
Details
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
More
Article №: 624 3180 34
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 826731
Details
- Product line: KIT2P
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Hub Profile: 24,2 x 21,8
- Weight [kg]: 5,52
- Clutch: for vehicles with push type clutch
- for flywheel manufacturer: LUK
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 624 3553 33
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 624 3180 09
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 623 3227 00
Details
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 834086
Details
- Supplementary Info: KIT3P (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without sensor
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 24,2 x 21,8
- Weight [kg]: 6,19
- for flywheel manufacturer: LUK
- Bore Diameter [mm]: 31
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
More
Article №: 600 0146 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 16
- Number of mounting bores: 8
- Condition: New
More
£419,34
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3000 970 047
Details
- Product line: XTend
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 21,8x24,3-23N
- Observe service information
- only available in set
- Condition: New
More
Article №: ADV1830144
Details
- Diameter [mm]: 241
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- for OE number: 04L 141 015 S1
- Observe service information
- Condition: New
More
Article №: ADV183097
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- for OE number: 03G 141 015 L S1
- Observe service information
- Condition: New
More
Article №: F1W205NX
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Hub Profile: 24,2x21,8
- Extention Force [N]: 7200
- Outer Diameter 2 [mm]: 240
- Condition: New
More
Article №: 600 0148 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 17
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
- Central Slave Cylinder, clutch 1
- Clutch kit 1
- Clutch kit 1
- Dual mass flywheel 1
- Screw Set, flywheel 1
More
Article №: 834586
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 24,3 x 21,8
- Weight [kg]: 6,5
- Clutch: for vehicles with push type clutch
- Control Type: Push control
- Bore Diameter [mm]: 29
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Material: Plastic
- Condition: New
More
Article №: NZS-VW-005
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc
- Supplementary Article / Supplementary Info: without central slave cylinder, with clutch pressure plate
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Fabrication Number: NZS-VW-005
- Condition: New
More
Article №: 3000 990 248
Details
- Product line: XTend Kit plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Alternative Repair Kit: 3000 951 151
- Condition: New
More
Article №: 600 0283 00
Details
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
More
Article №: 837361
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with flywheel screws, with central slave cylinder
- New Part
- Weight [kg]: 18,22
- Number of mounting bores: 8
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 3000 950 940
Details
- Product line: XTend
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Observe service information
- only available in set
- Condition: New
More
Article №: 834370
Details
- Product line: KIT3P (CSC)
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Weight [kg]: 6,61
- for flywheel manufacturer: LUK
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
