Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Audi TT Coupe 2.0 TTS quattro 310 hp Petrol
- Brake pads Audi TT Coupe 2.0 TTS quattro 310 hp Petrol
- Brake caliper Audi TT Coupe 2.0 TTS quattro 310 hp Petrol
- ABS sensor Audi TT Coupe 2.0 TTS quattro 310 hp Petrol
- Brake caliper repair kit Audi TT Coupe 2.0 TTS quattro 310 hp Petrol
- Handbrake Audi TT Coupe 2.0 TTS quattro 310 hp Petrol
- Brake disc back plate Audi TT Coupe 2.0 TTS quattro 310 hp Petrol
- Brake pad wear sensor Audi TT Coupe 2.0 TTS quattro 310 hp Petrol
- Brake caliper carrier Audi TT Coupe 2.0 TTS quattro 310 hp Petrol
- Brake hose Audi TT Coupe 2.0 TTS quattro 310 hp Petrol
- Master cylinder TT 2.0 TTS quattro 310 hp Petrol
- Vacuum pump TT 2.0 TTS quattro 310 hp Petrol
- Guide sleeve kit, brake caliper TT 2.0 TTS quattro 310 hp Petrol
- Handbrake shoes TT 2.0 TTS quattro 310 hp Petrol
- Brake fluid TT 2.0 TTS quattro 310 hp Petrol
- Brake pad fitting kit TT 2.0 TTS quattro 310 hp Petrol
- Brake servo TT 2.0 TTS quattro 310 hp Petrol
- Wheel cylinder TT 2.0 TTS quattro 310 hp Petrol
- Brake pads and discs TT 2.0 TTS quattro 310 hp Petrol
- Brake light switch TT 2.0 TTS quattro 310 hp Petrol
- Brake caliper piston TT 2.0 TTS quattro 310 hp Petrol
- Brake disc bolts TT 2.0 TTS quattro 310 hp Petrol
- Performance brake discs TT 2.0 TTS quattro 310 hp Petrol
- High-performance brake pads TT 2.0 TTS quattro 310 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Audi TT Coupe 2.0 TTS quattro 310 hp Petrol
Article №: MDC2205C
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KZ
- Diameter [mm]: 272
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 149
- Height [mm]: 48,3
- Weight [kg]: 3,9
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 12,7
- Drilled: no
- Condition: New
More
£ 33,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 40H9134-JPN
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Condition: New
More
£ 37,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BS7719
Details
-
- Fitting Position: Rear Axle
- Manufacturer Restriction: TRW
- for PR number: 2ED
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Height [mm]: 50,1
- Test Mark: 90R-02C0100/0480
- Drilled: no
- Condition: New
More
£ 37,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 08.C501.11
Details
-
- for PR number: 1KV, 2ED
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Rim Hole Number: 5
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Height [mm]: 48
- Weight [kg]: 5,1
- Surface: Coated
- Manufacturer Restriction: TRW
- Material: Grey Cast Iron
- Condition: New
More
£ 37,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 115 523 0026
Details
- for PR number: 2EF, 2EK, 2EG
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 65
- Height [mm]: 48,4
- Required quantity: 2
- Drilled: no
- Condition: New
More
£ 38,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 08.C501.10
Details
-
- Fitting Position: Rear Axle
- for PR number: 2ED
- Product line: Prime
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Height [mm]: 48,3
- for article number: 08.C501.10
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 38,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 600204
Details
-
- Fitting Position: Rear Axle
- for PR number: 2EF, 2EG, 2EK, 2ER, 2ES, 2ET
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 65
- Height [mm]: 48,3
- Thread Size: 15,5
- Thread Size 1: 15,5
- Condition: New
More
£ 39,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: X6R928S
Details
-
- Fitting Position: Rear Axle
- for PR number: 2EF, 2ER, 2EK, 2ET, 2EG, 2ES
- Diameter [mm]: 309,9
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 65
- Height [mm]: 48,5
- Weight [kg]: 7,15
- Surface: Coated
- Condition: New
More
£ 39,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BS7184
Details
-
- Fitting Position: Rear Axle
- for PR number: 2EG, 2EK
- Diameter [mm]: 310
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 65
- Height [mm]: 48,5
- Test Mark: 90R-02C0289/0576
- Drilled: no
- Condition: New
More
£ 40,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 115 523 0007/PD
Details
- for PR number: 2ED
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Height [mm]: 48
- Surface: UV paint coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 41,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 800-840
Details
- for PR number: 1LJ/1ZD
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 65
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Height [mm]: 50
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 41,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 24012202191PR-PCS-MS
Details
- for PR number: 2EG, 2EK, 2ES, 2EF, 2ER, 2ET
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 169
- Height [mm]: 48,5
- Surface: Coated
- Machining: High-carbon
- Required quantity: 2
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Drilled: no
- Condition: New
More
£ 43,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 24012202191PR-PCS-MSP
Details
- for PR number: 2EG, 2EK, 2ES, 2EF, 2ER, 2ET
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 169
- Height [mm]: 48,5
- Surface: Coated
- Machining: High-carbon
- Required quantity: 2
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Condition: New
More
£ 43,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 24011202101PR-PCS-MSP
Details
-
- Vehicle Equipment: for vehicles with electric parking brake
- for PR number: 1KV, 2ED, 2EN, 2EP
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 173
- Height [mm]: 48,2
- Surface: Coated
- Required quantity: 2
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Condition: New
More
£ 43,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BS-8784
Details
- for PR number: 1KZ
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Hole Arrangement/Number: 5/10
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 65
- Brake System: BOSCH
- Height [mm]: 48,3
- Drilled: no
- Condition: New
More
£ 44,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 24012501581-PCS-MSP
Details
- for PR number: 1LJ, 1ZD, 1ZF, 1ZL, 1LP, 1ZT, 1ZV, 1ZW
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 133,5
- Height [mm]: 36,7
- Machining: High-carbon
- Required quantity: 2
- Bore Diameter [mm]: 15,6
- Net weight [kg]: 8,74
- Condition: New
More
£ 45,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 19-2018SPORT
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid, slotted/perforated
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Height [mm]: 48,3
- Surface: Painted
- Test Mark: E1 90R 02 C0190/0261
- Drilled: yes
- Condition: New
More
£ 45,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BS-8036
Details
- for PR number: 1LJ, 1ZD
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Hole Arrangement/Number: 5/10
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 49,7
- Drilled: no
- Condition: New
More
£ 45,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: C3W048ABE
Details
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: Vented
- Number of Holes: 5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 65
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 145
- Height [mm]: 49,7
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 45,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 211003561
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9,7
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 174,5
- Height [mm]: 48,2
- Required quantity: 1
- Bore Diameter [mm]: 15,3
- Net weight [kg]: 7,77
- Gross Weight [kg]: 8
- Condition: New
More
£ 45,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 24012202191-SET-MS
Details
- for PR number: 2EG, 2EK, 2ES, 2EF, 2ER, 2ET
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Required quantity: 1
- Net weight [kg]: 13,30
- Gross Weight [kg]: 13,60
- Drilled: no
- Condition: New
More
£ 45,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: C3W039ABE-P
Details
- for PR number: 1LJ, 1ZD
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25,0
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 146
- Height [mm]: 49,9
- Surface: Coated
- Machining: High-carbon
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Condition: New
More
£ 46,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 61-00-0903C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Height [mm]: 48
- Surface: Painted
- Tightening Torque [Nm]: 120
- for OE number: 5Q0615601E
- Drilled: no
- Condition: New
More
£ 48,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BS-8044
Details
- for PR number: 2EG, 2EK
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Hole Arrangement/Number: 5/10
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 65
- Height [mm]: 48,5
- Drilled: no
- Condition: New
More
£ 48,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 231-03-238-2
Details
-
- Fitting Position: Front Axle
- for PR number: 1LK, 1LH, 1LW
- Diameter [mm]: 340
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Centering Diameter [mm]: 65
- Height [mm]: 49,6
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Article number of recommended accessories: 131-07-123, 131-07-124
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£ 51,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 300 products
Show the next items
- 1
- 2
- ...
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
