Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Audi Q2 35TFSI 150 hp Petrol
- Coil spring Audi Q2 35TFSI 150 hp Petrol
- Top strut mount and bearing Audi Q2 35TFSI 150 hp Petrol
- Suspension kit, coil springs Audi Q2 35TFSI 150 hp Petrol
- Shock absorber dust cover and bump stops Audi Q2 35TFSI 150 hp Petrol
- Boot, air suspension Audi Q2 35TFSI 150 hp Petrol
- Suspension kit, shock absorber and coil spring Audi Q2 35TFSI 150 hp Petrol
- Repair kit, wheel suspension Audi Q2 35TFSI 150 hp Petrol
- Hydraulic oil Audi Q2 35TFSI 150 hp Petrol
- Camber bolts Audi Q2 35TFSI 150 hp Petrol
- Relay, leveling control Q2 35TFSI 150 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Suspension kit, shock absorber and coil spring Audi Q2 35 TFSI 150 hp Petrol
Article №: 49-255874
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1400
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1240
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Electronically adjustable shock strength, Built-in adjustable
- Suspension: for vehicles with electronic suspension control, Threaded Suspension (height adjustable)
- Suspension Strut Outer Diameter [mm]: 55
- Product line: - B16 Damptronic®
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: SA1185N0053
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: E90-15-024-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
- Axle: Twist-beam Rear Axle
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 35
-
- Observe service information
- EG type approval number from: e1*2007/46*1552*..
- Registration Type: with General Operating Permit (ABE)
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Suspension: for vehicles without electronic suspension control
- Axle Load front axle to [kg]: 995
- Axle Load rear axle to [kg]: 990
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: E90-15-024-02-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
- Axle: Twist-beam Rear Axle
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 35
-
- Observe service information
- EG type approval number from: e1*2007/46*1552*..
- Registration Type: with General Operating Permit (ABE)
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Suspension: for vehicles without electronic suspension control
- Axle Load front axle to [kg]: 1070
- Axle Load rear axle to [kg]: 990
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: PSS65-15-024-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 45-75
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 40-70
-
- Observe service information
- EG type approval number from: e1*?/?*1552*..
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Axle Load front axle to [kg]: 1100
- Axle Load rear axle to [kg]: 960
- Suspension Strut Outer Diameter [mm]: 55
- Axle: Twist-beam Rear Axle
- Vehicle Equipment: for vehicles without level control
- Follow installation instructions
- Condition: New
More
Article №: 46-276018
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 995
- Lowered Suspension ca. [mm]: 35
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 990
- Lowered Suspension ca. [mm]: 30
-
- Axle: Rigid Axle
- Registration Type: Conditions see certificate
- Shock Absorber Type: Gas Pressure
- Product line: - B12 Pro-Kit
- Condition: New
More
Article №: 47-334373
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1150
- Lowered Suspension ca. [mm]: 45-65
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1170
- Lowered Suspension ca. [mm]: 40-60
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 47-327030
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1060
- Lowered Suspension ca. [mm]: 10-30
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1125
- Lowered Suspension ca. [mm]: 20-35
-
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 48-251570
Details
-
- Fitting Position: Rear Axle
- Axle: 014
- Axle Load [kg] to: 1220
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 25-45
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1160
- for PR number: G03, G04, G05, G06, G07
- Lowered Suspension ca. [mm]: 30-45
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B16 PSS10
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 49-309089
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1400
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1240
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Electronically adjustable shock strength
- Suspension: Threaded Suspension (height adjustable)
- Suspension Strut Outer Diameter [mm]: 55
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 49-347029
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1100
- Lowered Suspension ca. [mm]: 10-40
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1170
- Lowered Suspension ca. [mm]: 20-35
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Electronically adjustable shock strength
- Axle: Multi-link Axle
- Registration Type: Conditions see certificate
- Suspension: for vehicles with electronic suspension control, Threaded Suspension (height adjustable)
- Suspension Strut Outer Diameter [mm]: 55
- Condition: New
More
Article №: 89-313022
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 0-30
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 10-30
-
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Built-in adjustable
- Registration Type: without TÜV® certificate, not permitted in the area of the StVZO
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Supplementary Article / Supplementary Info Info 2: with suspension strut support mount
- Suspension Strut Outer Diameter [mm]: 55
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
