Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Audi Allroad 4BH 2.7 quattro 254 hp Petrol
- Brake pads Audi Allroad 4BH 2.7 quattro 254 hp Petrol
- Brake caliper Audi Allroad 4BH 2.7 quattro 254 hp Petrol
- ABS sensor Audi Allroad 4BH 2.7 quattro 254 hp Petrol
- Brake caliper repair kit Audi Allroad 4BH 2.7 quattro 254 hp Petrol
- Handbrake Audi Allroad 4BH 2.7 quattro 254 hp Petrol
- Brake disc back plate Audi Allroad 4BH 2.7 quattro 254 hp Petrol
- Master cylinder Audi Allroad 4BH 2.7 quattro 254 hp Petrol
- Brake caliper carrier Audi Allroad 4BH 2.7 quattro 254 hp Petrol
- Brake hose Audi Allroad 4BH 2.7 quattro 254 hp Petrol
- Handbrake cable ALLROAD 2.7 quattro 254 hp Petrol
- Guide sleeve kit, brake caliper ALLROAD 2.7 quattro 254 hp Petrol
- Brake fluid ALLROAD 2.7 quattro 254 hp Petrol
- Brake pad fitting kit ALLROAD 2.7 quattro 254 hp Petrol
- Brake servo ALLROAD 2.7 quattro 254 hp Petrol
- Brake pads and discs ALLROAD 2.7 quattro 254 hp Petrol
- Brake light switch ALLROAD 2.7 quattro 254 hp Petrol
- Brake caliper piston ALLROAD 2.7 quattro 254 hp Petrol
- Brake disc bolts ALLROAD 2.7 quattro 254 hp Petrol
- Master cylinder repair kit ALLROAD 2.7 quattro 254 hp Petrol
- Abs pump ALLROAD 2.7 quattro 254 hp Petrol
- High-performance brake pads ALLROAD 2.7 quattro 254 hp Petrol
- Lateral and longitudinal acceleration sensor ALLROAD 2.7 quattro 254 hp Petrol
- Control unit, brake / driving dynamics ALLROAD 2.7 quattro 254 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Audi Allroad 4BH 2.7 quattro 254 hp Petrol
Article №: 82B0199
Details
- Fitting Position: Front Axle
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Number of Holes: 5/10
- Construction Year to: 07/2005
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28,0
- Centering Diameter [mm]: 68,1
- Inner Diameter [mm]: 137
- Height [mm]: 46,3
- Surface: Uncoated
- Machining: High-carbon
- No. of holes 2: 9
- Material: Cast Iron
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£ 44,15
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15877
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Number of Holes: 5
- Construction Year to: 07/2005
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Weight [kg]: 1,75
- Drilled: no
- Condition: New
More
£ 17,01
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG3671
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 9,9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 48
- Surface: Oiled
- Test Mark: E1 90R-02C0100/1590
- Drilled: no
- Condition: New
More
£ 19,77
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V10-40073
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 48,1
- Weight [kg]: 4,045
- Brake Disc Hub Height [mm]: 38
- Packaging width [cm]: 26
- Packaging height [cm]: 10
- Packaging Depth [cm]: 26
- Drilled: no
- Condition: New
More
£ 20,69
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADV184338
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 48
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Weight [kg]: 3,6
- Surface: Coated
- Observe service information
- Drilled: no
- Condition: New
More
£ 20,69
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 22906
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 48
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Weight [kg]: 3,480
- Surface: Coated
- Observe service information
- Drilled: no
- Condition: New
More
£ 22,53
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562503JC
Details
-
- Fitting Position: Rear Axle
- for PR number: 255
- Diameter [mm]: 255
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Brake System: TRW
- Height [mm]: 47,8
- Weight [kg]: 7,23
- Surface: Coated
- Tightening Torque [Nm]: 120
- Version: JC
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 27,5
- Packaging width [cm]: 27,5
- Packaging height [cm]: 11
- Drilled: no
- Condition: New
More
£ 23,91
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17062
Details
-
- Fitting Position: Rear Axle
- for PR number: 255
- Diameter [mm]: 255
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Hub Diameter [mm]: 146
- Height [mm]: 47,5
- Weight [kg]: 3,6
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 24,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562503CH
Details
-
- Fitting Position: Rear Axle
- for PR number: 255
- Diameter [mm]: 255
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 47,8
- Weight [kg]: 7,23
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 25,6
- Packaging width [cm]: 25,6
- Packaging height [cm]: 9,9
- Drilled: no
- Condition: New
More
£ 24,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6723.00
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 48
- Weight [kg]: 3,6
- Test Mark: K.B.A.: 61210
- Drilled: no
- Condition: New
More
£ 24,83
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1163204000
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 25,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 480
Details
-
- TecDoc Engine Number: BEL
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 47,6
- Surface: Coated
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,7
- Drilled: no
- Condition: New
More
£ 25,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF1177C
Details
-
- Fitting Position: Rear Axle
- for PR number: 255
- Product line: PREMIER
- Diameter [mm]: 255
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 47,8
- Weight [kg]: 3,62
- Surface: Coated
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packaging length [cm]: 28
- Packaging width [cm]: 28
- Packaging height [cm]: 12
- Drilled: no
- Condition: New
More
£ 25,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08.9084.11
Details
- Product line: COATED DISC LINE
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 48
- Surface: Coated
- Tightening Torque [Nm]: 120
- Drilled: no
- Condition: New
More
£ 25,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-1801
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 48
- Weight [kg]: 3,5
- Surface: Painted
- Colour: black
- Drilled: no
- Condition: New
More
£ 26,21
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6050207
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 68
- Height [mm]: 48,1
- Production Number: K6050207
- Drilled: no
- Condition: New
More
£ 26,21
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 109-091
Details
- Product line: PRO
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/05
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 47,6
- Weight [kg]: 3,5
- Surface: Coated
- Technical Information Number: 54173PRO
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£ 27,13
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF4039
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 48.2
- Surface: Painted
- Test Mark: E1 90R-02 C0190/0016
- Bore Diameter [mm]: 15,3
- Drilled: yes
- Condition: New
More
£ 27,13
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24011002601-PCS-MS
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Number of Holes: 5
- Construction Year to: 07/2005
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Inner Diameter [mm]: 144,5
- Height [mm]: 48,1
- Required quantity: 2
- Bore Diameter [mm]: 15,3
- Net weight [kg]: 3,61
- Gross Weight [kg]: 3,83
- Drilled: no
- Condition: New
More
£ 27,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6723.00
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 48
- Weight [kg]: 3,6
- Test Mark: K.B.A.: 61210
- Drilled: no
- Condition: New
More
£ 28,05
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0806C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10,0
- Centering Diameter [mm]: 68,0
- Height [mm]: 47,8
- Surface: Painted
- Test Mark: ECE-R90, ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 28,05
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A1601P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Number of Holes: 5
- Rim Hole Number: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 48
- Drilled: no
- Condition: New
More
£ 28,05
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD2092
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 47,6
- Surface: Painted, Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 30
- Packaging width [cm]: 28,5
- Packaging height [cm]: 11,5
- Drilled: no
- Condition: New
More
£ 28,51
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0020203
Details
- Fitting Position: Front Axle
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Number of Holes: 5/10
- Construction Year to: 07/2005
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28,0
- Centering Diameter [mm]: 68,1
- Inner Diameter [mm]: 137
- Height [mm]: 46,3
- Surface: Uncoated
- Machining: High-carbon
- No. of holes 2: 9
- Material: Cast Iron
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£ 41,85
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 314784
Details
-
- Fitting Position: Rear Axle
- for PR number: 255
- Diameter [mm]: 255
- Brake Disc Type: solid
- Rim Hole Number: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 47,6
- Surface: Coated
- Net weight [kg]: 3,6
- Drilled: no
- Condition: New
More
£ 46,91
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 132 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
