Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Audi A8 D2 2.8 174 hp Petrol
- Brake pads Audi A8 D2 2.8 174 hp Petrol
- Brake caliper Audi A8 D2 2.8 174 hp Petrol
- ABS sensor Audi A8 D2 2.8 174 hp Petrol
- Brake caliper repair kit Audi A8 D2 2.8 174 hp Petrol
- Handbrake Audi A8 D2 2.8 174 hp Petrol
- Brake caliper carrier Audi A8 D2 2.8 174 hp Petrol
- Brake hose Audi A8 D2 2.8 174 hp Petrol
- Master cylinder Audi A8 D2 2.8 174 hp Petrol
- Handbrake cable Audi A8 D2 2.8 174 hp Petrol
- Vacuum pump A8 2.8 174 hp Petrol
- Guide sleeve kit, brake caliper A8 2.8 174 hp Petrol
- Brake fluid A8 2.8 174 hp Petrol
- Brake pad fitting kit A8 2.8 174 hp Petrol
- Brake servo A8 2.8 174 hp Petrol
- Brake pads and discs A8 2.8 174 hp Petrol
- Brake light switch A8 2.8 174 hp Petrol
- Abs ring A8 2.8 174 hp Petrol
- Brake caliper piston A8 2.8 174 hp Petrol
- Brake pipe A8 2.8 174 hp Petrol
- Brake fluid reservoir A8 2.8 174 hp Petrol
- Master cylinder repair kit A8 2.8 174 hp Petrol
- High-performance brake pads A8 2.8 174 hp Petrol
- Abs pump A8 2.8 174 hp Petrol
- Control unit, brake / driving dynamics A8 2.8 174 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Audi A8 D2 2.8 174 hp Petrol
Article №: 6592.10
Details
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: Vented
- Number of Holes: 10
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Height [mm]: 59
- Weight [kg]: 10,1
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£36,04
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 30 92 3306
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 269
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 46
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Weight [kg]: 4,975
- Surface: Coated
- Drilled: no
- Condition: New
More
£48,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92098400
Details
-
- Fitting Position: Rear Axle
- Special Purpose Vehicle: not for armoured vehicles
- Vehicle Identification Number (VIN) from: 4D-X-005000
- Diameter [mm]: 269
- Brake Disc Type: Externally Vented
- Hole Arrangement/Number: 05/05
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 68
- Inner Diameter [mm]: 135
- Height [mm]: 46,3
- Weight [kg]: 5
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 27,8
- Packaging width [cm]: 27,8
- Packaging height [cm]: 12,2
- Drilled: no
- Condition: New
More
£50,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG3033
Details
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Height [mm]: 59,5
- Surface: Oiled
- Test Mark: E1 90R-02C0289/1854
- Drilled: no
- Condition: New
More
£50,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V10-80086
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Height [mm]: 59,7
- Weight [kg]: 11,235
- Vehicle Identification Number (VIN) to: 4D-X-004 999
- Brake Disc Hub Height [mm]: 29,6
- Packaging width [cm]: 32
- Packaging height [cm]: 12
- Packaging Depth [cm]: 32
- Drilled: no
- Condition: New
More
£53,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92037100
Details
-
- Fitting Position: Rear Axle
- Vehicle Identification Number (VIN) to: 4D-X-004999
- Diameter [mm]: 269
- Brake Disc Type: Externally Vented
- Hole Arrangement/Number: 05/05
- Wheel Bolt Bore Diameter [mm]: 15,5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Centering Diameter [mm]: 68
- Inner Diameter [mm]: 155,8
- Height [mm]: 46,3
- Weight [kg]: 5,5
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 27,8
- Packaging width [cm]: 27,8
- Packaging height [cm]: 12,2
- Drilled: no
- Condition: New
More
£53,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 18656
Details
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 59
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Weight [kg]: 10,01
- Surface: Coated
- Vehicle Identification Number (VIN) to: 4D-X-004 999
- Observe service information
- Drilled: no
- Condition: New
More
£56,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF4125S
Details
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: Vented
- Number of Holes: 10
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Height [mm]: 59,4
- Surface: Painted
- Thread Size: 15,5
- Colour: black
- Drilled: no
- Condition: New
More
£59,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 22964
Details
- for PR number: 1LX
- Fitting Position: Front Axle
- Diameter [mm]: 323
- Brake Disc Type: Externally Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 60
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Weight [kg]: 10,5
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£59,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 617
Details
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: Vented, internally vented
- Number of Holes: 10
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Height [mm]: 59,4
- Surface: Oiled
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,5
- Drilled: no
- Condition: New
More
£59,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 127-191
Details
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: not for armoured vehicles
- Vehicle Identification Number (VIN) to: 4D-X-004999
- Product line: PRO High Carbon
- Diameter [mm]: 314
- Brake Disc Type: Externally Vented
- Hole Arrangement/Number: 05/10
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Height [mm]: 59,4
- Weight [kg]: 10,3
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£60,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 115 521 1109
Details
-
- for PR number: 1LX
- Vehicle Identification Number (VIN) from: 4D-X-005 001
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle
- Diameter [mm]: 323
- Brake Disc Type: Vented
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Brake System: ATE
- Height [mm]: 59,5
- Required quantity: 2
- Drilled: no
- Condition: New
More
£61,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADBP430003
Details
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 59
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Weight [kg]: 10,01
- Surface: Coated
- Vehicle Identification Number (VIN) to: 4D-X-004 999
- Observe service information
- Drilled: no
- Condition: New
More
£62,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 07.35.039
Details
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- for OE number: 441 615 301 AA
- Drilled: no
- Condition: New
More
£62,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADV1843128
Details
- for PR number: 1LX
- Fitting Position: Front Axle
- Diameter [mm]: 323
- Brake Disc Type: Externally Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 60
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Weight [kg]: 10,5
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£66,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92073200
Details
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: not for armoured vehicles
- Vehicle Identification Number (VIN) to: 4D-X-004999
- Diameter [mm]: 314
- Brake Disc Type: Externally Vented
- Hole Arrangement/Number: 05/10
- Wheel Bolt Bore Diameter [mm]: 15,5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Inner Diameter [mm]: 144,1
- Height [mm]: 59,4
- Weight [kg]: 10,3
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 32,8
- Packaging width [cm]: 32,8
- Packaging height [cm]: 7,5
- Drilled: no
- Condition: New
More
£68,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 127-421
Details
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: not for armoured vehicles
- Vehicle Identification Number (VIN) from: 4D-X-005001
-
- Vehicle Identification Number (VIN) to: 4D-Y-006000
- for PR number: 1LX
- Product line: PRO High Carbon
- Diameter [mm]: 323
- Brake Disc Type: Externally Vented
- Hole Arrangement/Number: 05/10
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Height [mm]: 59,5
- Weight [kg]: 10,6
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£69,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.7728.11
Details
- Product line: Prime
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Height [mm]: 59
- Surface: Coated
- Tightening Torque [Nm]: 120
- Machining: High-carbon
- Drilled: no
- Condition: New
More
£69,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF954C-1
Details
- Product line: PREMIER Coat+ disc
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: Vented
- Number of Holes: 10
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Height [mm]: 59
- Weight [kg]: 10,63
- Surface: Coated
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packaging length [cm]: 31
- Packaging width [cm]: 31
- Packaging height [cm]: 6,6
- Drilled: no
- Condition: New
More
£71,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 16328
Details
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Hub Diameter [mm]: 148
- Height [mm]: 59,4
- Weight [kg]: 10,39
- Drilled: no
- Condition: New
More
£71,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD0095HC
Details
-
- for PR number: 1LX
- Vehicle Identification Number (VIN) from: 4D-X-005001
- Fitting Position: Front Axle
- Diameter [mm]: 323
- Brake Disc Type: Vented
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Brake System: ATE
- Height [mm]: 59,5
- Machining: High-carbon
- Required quantity: 2
- Drilled: no
- Condition: New
More
£72,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0130-0104.1
Details
-
- Construction Year from: 06/1994
- Fitting Position: Front Axle
- Diameter [mm]: 314,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 30,0
- Minimum thickness [mm]: 28,0
- Centering Diameter [mm]: 68,0
- Inner Diameter [mm]: 136,0
- Height [mm]: 59,7
- Surface: Coated
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 10
- Test Mark: E1 90R-02C0118/1022
- Bore Diameter [mm]: 15,3
- Drilled: no
- Condition: New
More
£77,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6781.10
Details
- Fitting Position: Front Axle
- Diameter [mm]: 323
- Brake Disc Type: Vented
- Number of Holes: 10
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Height [mm]: 59,5
- Weight [kg]: 10,52
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£77,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0737C
Details
-
- Vehicle Identification Number (VIN) from: 4DX005000
- Fitting Position: Front Axle
- Diameter [mm]: 323,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 68,0
- Brake Disc Thickness [mm]: 30,0
- Height [mm]: 59,5
- Surface: Painted
- Test Mark: ECE-R90, ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£79,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 600924C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: Vented
- Number of Holes: 10
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Height [mm]: 59
- Surface: Painted
- Tightening Torque [Nm]: 120
- for OE number: 441615301AA
- Drilled: no
- Condition: New
More
£81,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 147 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
