Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Suspension arm Audi A8 D2 3.3TDI quattro 224 hp Diesel
- Wheel hub Audi A8 D2 3.3TDI quattro 224 hp Diesel
- Wheel bearing Audi A8 D2 3.3TDI quattro 224 hp Diesel
- Top strut mount and bearing Audi A8 D2 3.3TDI quattro 224 hp Diesel
- Anti-roll bar link Audi A8 D2 3.3TDI quattro 224 hp Diesel
- Engine mount Audi A8 D2 3.3TDI quattro 224 hp Diesel
- Track rod end Audi A8 D2 3.3TDI quattro 224 hp Diesel
- Suspension kit Audi A8 D2 3.3TDI quattro 224 hp Diesel
- Inner tie rod Audi A8 D2 3.3TDI quattro 224 hp Diesel
- ABS sensor Audi A8 D2 3.3TDI quattro 224 hp Diesel
- Ball joint A8 3.3TDI quattro 224 hp Diesel
- Suspension bushes A8 3.3TDI quattro 224 hp Diesel
- Shock absorber dust cover and bump stops A8 3.3TDI quattro 224 hp Diesel
- Tyre pressure sensor (TPMS) A8 3.3TDI quattro 224 hp Diesel
- Anti-roll bar bushes A8 3.3TDI quattro 224 hp Diesel
- Axle bushes A8 3.3TDI quattro 224 hp Diesel
- Wheel bolts and wheel nuts A8 3.3TDI quattro 224 hp Diesel
- Wheel spacers A8 3.3TDI quattro 224 hp Diesel
- Repair kit, wheel suspension A8 3.3TDI quattro 224 hp Diesel
- Steering rack boot A8 3.3TDI quattro 224 hp Diesel
- Spring cap A8 3.3TDI quattro 224 hp Diesel
- Headlight level sensor A8 3.3TDI quattro 224 hp Diesel
- Camber bolts A8 3.3TDI quattro 224 hp Diesel
- Wheel nuts A8 3.3TDI quattro 224 hp Diesel
- Abs ring A8 3.3TDI quattro 224 hp Diesel
- Mounting kit, control lever A8 3.3TDI quattro 224 hp Diesel
- Mounting, shock absorbers A8 3.3TDI quattro 224 hp Diesel
- Anti-roll bar stabiliser kit A8 3.3TDI quattro 224 hp Diesel
- Repair kit, support- / steering link A8 3.3TDI quattro 224 hp Diesel
- Bracket, stabilizer mounting A8 3.3TDI quattro 224 hp Diesel
- Lateral and longitudinal acceleration sensor A8 3.3TDI quattro 224 hp Diesel
- Towbar / parts
- Wiper and washer system
Ball joint Audi A8 D2 3.3 TDI quattro 224 hp Diesel
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
AUDI A8 (4D2, 4D8) 3.3 TDI quattro year of manufacture 2000, 224 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Left
- Supplementary Article / Supplementary Info Info 2: with bolts
- Bolt/Nut Version: with plain washer
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Left
- Paired product: 26773 02
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Info: OE Turbo NEW
- Fitting Position: Front Axle Left, Lower
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Weight [kg]: 0,500
- Paired product: 14444
- Control/Trailing Arm Type: for control arm
- Observe service information
- External Thread Size: M12 x 1,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Lower, Front Axle Left, Front Axle Right
- Thread Size: M12x1,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Cone Size [mm]: 19
- Cone Pitch: 1:5
- Thread Size: M12x1.5
- Supplementary Article / Supplementary Info: with accessories
- Paired product: JBJ751
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Thread Size: M12x1.25
- Length [mm]: 80
- Paired product: TC825
- Height [mm]: 77
- Width [mm]: 80
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Cone Size [mm]: 20,2
- Supplementary Article / Supplementary Info: with synthetic grease
- Thread Size 1: M12 x 1,5
- Paired product: VKDS 311008
- Cone Size 1 [mm]: 15,4
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right
- Paired product: 26772 02
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Required quantity: 1
- Weight [kg]: 0,700
- Paired product: L29575
- Packaging length [cm]: 14,5
- Packaging width [cm]: 11
- Packaging height [cm]: 10,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Left, Lower
- Cone Pitch: 1:5
- Thread Size: M12x1,5
- Paired product: 29999 02
- Observe service information
- Article number of recommended accessories: 37220 01, 46275 01
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Lower
- Cone Size [mm]: 15
- Weight [kg]: 0,350
- Paired product: 12658
- Control/Trailing Arm Type: for control arm
- Mounting points diameter [mm]: 8,1
- Observe service information
- External Thread Size: M12 x 1,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Cone Size [mm]: 25,3
- Supplementary Article / Supplementary Info: with synthetic grease
- Diameter [mm]: 42
- Thread Size 1: M14 x 1,5
- Cone Size 1 [mm]: 17,3
- Condition: New
Over 100 in stock
