Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Clutch kit AUDI A6 Allroad 3.0 TDI quattro 245 hp Diesel
Article №: 202154
Details
-
- Construction Year to: 04/2012
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Transmission Code: DL501
- Clutch: for vehicles with double disc clutch
- Max. transferable engine torque [Nm]: 500
- Clutch Type: for wet clutch
- Quality: OE-Version/Genuine
- Fitting Position: Longitudinal
- RPM to [rpm]: 7000
- Condition: New
More
Article №: 202155
Details
-
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Construction Year from: 05/2012
- Transmission Code: DL501
- Clutch: for vehicles with double disc clutch
- Max. transferable engine torque [Nm]: 600
- Clutch Type: for wet clutch
- Quality: OE-Version/Genuine
- Fitting Position: Longitudinal
- RPM to [rpm]: 7000
- Condition: New
More
Article №: ADBP300272
Details
-
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Transmission ID: SKN
-
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Transmission ID: PXJ
-
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Transmission ID: PLY
-
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Transmission ID: PXG
-
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Transmission ID: NSJ
-
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Transmission ID: NMZ
-
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Transmission ID: NSG
-
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Transmission ID: NNA
- Weight [kg]: 11,338
- Max. transferable engine torque [Nm]: 500
- Clutch Type: for wet clutch
- Condition: New
More
Article №: ADBP300271
Details
-
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Transmission ID: PLZ
-
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Transmission ID: PXH
-
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Transmission ID: NYA
-
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Transmission ID: NWR
- Weight [kg]: 11,392
- Max. transferable engine torque [Nm]: 600
- Clutch Type: for wet clutch
- Condition: New
More
You may also be interested in
Article №: 883089 000034
Details
- Product line: Performance
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 530
- Clutch Type: clutch disc with torsion springs with org. surfaces
- Condition: New
More
Article №: 624 3522 33
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 2289 000 298
Details
- Supplementary Info: ZMS Modul XTend
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with mounting tool, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Additionally required articles (article numbers): 1874 000 076
- Condition: New
More
Article №: 624 3759 00
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with screw set, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with mounting tool
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch release bearing 1
- Clutch Pressure Plate 1
- Clutch Disc 1
- Screw Set, flywheel 1
- Screw Set, flywheel 1
More
Article №: 623 3097 00
Details
- Product line: RepSet
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with clutch disc, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Condition: New
More
Article №: 624 0833 00
Details
- Product line: RepSet
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Check and replace dual-mass flywheel if necessary.
- Condition: New
More
Article №: 624 3308 00
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 623 3301 00
Details
- Product line: RepSet
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Check and replace dual-mass flywheel if necessary.
- Condition: New
More
Article №: 835160
Details
- Product line: KIT4P - CONVERSION KIT
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Supplementary Article / Supplementary Info: with single-mass flywheel
- New Part
- Weight [kg]: 18,28
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 624 3037 00
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 3000 815 001
Details
- Diameter [mm]: 228
- Number of Teeth: 23
- for components see parts list
- Condition: New
More
Article №: 624 3330 00
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: K30011501
Article №: 3000 840 301
Details
- Diameter [mm]: 210
- Number of Teeth: 23
- for components see parts list
- Condition: New
More
£105,83
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 624 3342 00
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 828565
Details
- Product line: KIT3P
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- New Part
- Hub Profile: 21,8 x 24,2
- Weight [kg]: 6,04
- Clutch: for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
£151,38
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3000 951 872
Details
- Product line: XTend
- Diameter [mm]: 240
- Number of Teeth: 23
- Hub Profile: 21,8x24,2-23N
- only available in set
- Condition: New
More
Article №: 600 0178 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 1,6
- Max. Clearance Angle [Degree]: 16
- Number of mounting bores: 8
- Condition: New
More
Inside the package:
More
Article №: K11769501
£112,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 600 0083 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 1,6
- Max. Clearance Angle [Degree]: 15
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
More
Article №: SF1084
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set
- Hub Profile: 21.9x24.2
- Multi-piece: four-piece
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Friction Lining Outer Diameter 1 [mm]: 228
- Condition: New
More
