Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
-
Exhaust
- Lambda sensor Audi A6 C6 2.8FSI quattro 210 hp Petrol
- Turbo solenoid valve Audi A6 C6 2.8FSI quattro 210 hp Petrol
- Mounting kit, exhaust system Audi A6 C6 2.8FSI quattro 210 hp Petrol
- Boost pressure sensor Audi A6 C6 2.8FSI quattro 210 hp Petrol
- Exhaust manifold gasket Audi A6 C6 2.8FSI quattro 210 hp Petrol
- Exhaust hanger Audi A6 C6 2.8FSI quattro 210 hp Petrol
- Exhaust gasket Audi A6 C6 2.8FSI quattro 210 hp Petrol
- Exhaust clamp Audi A6 C6 2.8FSI quattro 210 hp Petrol
- Clamp, exhaust system Audi A6 C6 2.8FSI quattro 210 hp Petrol
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Lambda sensor Audi A6 C6 2.8 FSI quattro 210 hp Petrol
Article №: 3922L0557
Details
-
- Fitting Position: Front
- Oxygen Sensor: Diagnostic Probe
- for cylinder: 1-3
- Exhaust System: after catalytic converter
-
- Exhaust System: after catalytic converter
- Vehicle type: Direct Fit 02 Sensor, Right cylinder bank
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 895
- Number of pins: 4
- Number of circuits: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
-51%
compared to RRP:
£ 70,70
£ 33,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0225
Details
-
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Fitting Position: for cylinder 4-6
-
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Fitting Position: for cylinder 1-3
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 660
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
-34%
compared to RRP:
£ 55,60
£ 36,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0797
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: Exhaust Manifold
- Required quantity: 2
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 460
- Number of pins: 6
- Number of circuits: 5
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
-57%
compared to RRP:
£ 139,60
£ 58,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0282
Details
-
- Oxygen Sensor: Regulating Probe
- Construction Year to: 09/2008
- Transmission Type: Automatic Transmission
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 600
- Number of circuits: 5
- Number of connectors: 6
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
-42%
compared to RRP:
£ 146,40
£ 83,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0400
Details
-
- Oxygen Sensor: Regulating Probe
- TecDoc Engine Number: BDX
- Construction Year to: 09/2008
- Oxygen Sensor: Heated
- Number of circuits: 5
- Supplementary Article / Supplementary Info Info 2: without plug
- Voltage [V]: 12
- Connector/Clamp: Connector may need adjustment
- Operating Mode: Electric
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
-50%
compared to RRP:
£ 242,60
£ 120,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 466016355039
Details
- Oxygen Sensor: Heated
- Cable Length [mm]: 1000
- Conductor Number: 4
- Resistor [Ohm]: 4,5
- Condition: New
More
£ 32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DOX-0119
Details
-
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- for cylinder: 4-6
- Product line: Universal fit
- Oxygen Sensor: Heated, Finger probe
- Thread Size: M18x1,5, M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Quality: OE
- Weight [g]: 103
- Manufacturer Restriction: DENSO
- Gross Weight [g]: 152
- Condition: New
More
-58%
compared to RRP:
£ 81,92
£ 33,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ES11117-12B1
Details
-
- Fitting Position: for cylinder 1-3, after catalytic converter
- Oxygen Sensor: Diagnostic Probe
- Oxygen Sensor: Finger probe, Heated
- Cable Length [mm]: 970
- Condition: New
More
£ 34,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-UV-001
Details
- Oxygen Sensor: Oxygen Sensor, Thread pre-greased
- Fabrication Number: ESL-UV-001
- Condition: New
More
£ 34,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ENT600010
Details
- Oxygen Sensor: Regulating Probe
- Exhaust System: after catalytic converter
- Number of circuits: 4
- Condition: New
More
£ 35,64
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140082
Details
-
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Fitting Position: for cylinder 4-6
-
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Fitting Position: for cylinder 1-3
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 660
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
-34%
compared to RRP:
£ 55,60
£ 36,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GOS-4000EX-3
Details
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter, for cylinder 4-6
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter, for cylinder 1-3
- Number of circuits: 4
- Recommended change interval [km]: 160000
- Connector/Clamp: Connector may need adjustment
- Condition: New
More
£ 37,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: OS-15P
Details
-
- Fitting Position: after catalytic converter
- TecDoc Engine Number: BDX
- Oxygen Sensor: Oxygen Sensor
- Cable Length [mm]: 200
- Number of pins: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Specification: Isolated Ground, Planar Type, Zirconia Type
- Length [inch]: 7,87
- Condition: New
More
£ 38,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 59-0013
Details
-
- Fitting Position: for cylinder 1-3, after catalytic converter, for cylinder 4-6
-
- Oxygen Sensor: Diagnostic Probe
- Oxygen Sensor: Oxygen Sensor
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Condition: New
More
£ 39,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: LBS00516
Details
- Oxygen Sensor: Diagnostic Probe
- Thread Size: M18X1.5mm
- Fitting Position: after catalytic converter
- Cable Length [mm]: 870
- Overall Length [mm]: 1000
- Length [mm]: 970
- Number of circuits: 4
- Conductor Number: 4
- Recommended change interval [km]: 80000
- Weight [kg]: 0,12
- Quality: OE EQUIVALENT
- Number of connectors: 1
- Supplementary Article / Supplementary Info Info 2: without clip
- Version: A
- Housing Colour: black
- Connector Shape: D Shape
- Net weight [kg]: 0,09
- Number of pins: 4
- Line insulation design: with silicone insulation
- Condition: New
More
£ 40,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 570111A
Details
- Oxygen Sensor: Oxygen Sensor
- Cable Length [mm]: 290
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Alternative Repair Kit: 570111
- Alternatively
- Condition: New
More
£ 41,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 9 7162 1
Details
- Oxygen Sensor: Heated
- Number of circuits: 4
- Condition: New
More
£ 41,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08997
Details
- Oxygen Sensor: Oxygen Sensor
- Number of pins: 4
- Length [mm]: 650
- Condition: New
More
£ 42,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0225P
Details
-
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Fitting Position: for cylinder 4-6
-
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Fitting Position: for cylinder 1-3
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
-50%
compared to RRP:
£ 86,61
£ 42,92
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09SKV121
Details
- Oxygen Sensor: Oxygen Sensor
- Weight [kg]: 0,12
- Always compare old and new part (in particular OE No.)
- Condition: New
More
£ 43,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09SKV904
Details
- Oxygen Sensor: Oxygen Sensor
- Number of circuits: 4
- Weight [kg]: 0,14
- Voltage [V]: 12
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.)
- Condition: New
More
£ 45,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CLS10005
Details
- Oxygen Sensor: Regulating Probe
- Fitting Position: after catalytic converter, for cylinder 1-3, for cylinder 4-6
- Overall Length [mm]: 300
- Number of circuits: 4
- Condition: New
More
-51%
compared to RRP:
£ 95,36
£ 45,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140957
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: Exhaust Manifold
- Required quantity: 2
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 460
- Number of pins: 6
- Number of circuits: 5
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
-57%
compared to RRP:
£ 139,60
£ 58,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140443
Details
-
- Oxygen Sensor: Regulating Probe
- Construction Year to: 09/2008
- Transmission Type: Automatic Transmission
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 600
- Number of circuits: 5
- Number of connectors: 6
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
-42%
compared to RRP:
£ 146,39
£ 83,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0282P
Details
-
- Oxygen Sensor: Regulating Probe
- Construction Year to: 09/2008
- Transmission Type: Automatic Transmission
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 535
- Number of circuits: 5
- Number of connectors: 6
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
-55%
compared to RRP:
£ 222,84
£ 98,31
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 200 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
