Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Audi A5 B9 Sportback 50TDI Mild Hybrid quattro 286 hp Diesel/Electro
- Coil spring Audi A5 B9 Sportback 50TDI Mild Hybrid quattro 286 hp Diesel/Electro
- Top strut mount and bearing Audi A5 B9 Sportback 50TDI Mild Hybrid quattro 286 hp Diesel/Electro
- Suspension kit, coil springs Audi A5 B9 Sportback 50TDI Mild Hybrid quattro 286 hp Diesel/Electro
- Shock absorber dust cover and bump stops Audi A5 B9 Sportback 50TDI Mild Hybrid quattro 286 hp Diesel/Electro
- Suspension kit, shock absorber and coil spring Audi A5 B9 Sportback 50TDI Mild Hybrid quattro 286 hp Diesel/Electro
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Suspension kit, shock absorber and coil spring Audi A5 B9 Sportback 50 TDI Mild Hybrid quattro 286 hp Diesel/Electro
Article №: E90-15-023-06-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 20
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 20
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1265
- Axle Load rear axle to [kg]: 1220
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: E90-15-023-17-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 20
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 20
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1265
- Axle Load rear axle to [kg]: 1220
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: 28756-4
Details
-
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 50
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 50
- for components see parts list
- Suspension Strut Outer Diameter [mm]: 48,5
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 28756-2
Details
-
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 50
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 50
- for components see parts list
- Suspension Strut Outer Diameter [mm]: 53
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 48-262316
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1250
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1260
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B16 PSS10
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: 46-334558
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1265
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1250
- Lowered Suspension ca. [mm]: 30
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: 46-332998
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1265
- Lowered Suspension ca. [mm]: 20
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1220
- Lowered Suspension ca. [mm]: 20
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: 48-275071
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1250
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1260
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B16 PSS10
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: 49-290868
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1250
- Lowered Suspension ca. [mm]: 10-20
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1260
- Lowered Suspension ca. [mm]: 5-20
-
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles with electronic suspension control
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Electronically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable)
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: PSM69-15-023-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30-60
- Axle Load rear axle to [kg]: 1250
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30-60
- Axle Load front axle to [kg]: 1300
-
- Observe service information
- EG type approval number from: e1*2001/116*0430*43, e13*2007/46*1084*27
- Suspension: Adjustable Struts (height and performance adjustable)
- Registration Type: with certificate
- Shock Absorber System: Adjustable Shock Strength, Height Adjustable, Single Tube Upside Down
- Vehicle Equipment: for vehicles without level control
- Housing diameter in clamping area [mm]: 53
- Follow installation instructions
- Condition: New
More
Article №: PSM69-15-023-02-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30-60
- Axle Load rear axle to [kg]: 1250
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30-60
- Axle Load front axle to [kg]: 1300
-
- Observe service information
- EG type approval number from: e1*2001/116*0430*43, e13*2007/46*1084*27
- Suspension: Adjustable Struts (height and performance adjustable)
- Registration Type: with certificate
- Shock Absorber System: Adjustable Shock Strength, Height Adjustable, Single Tube Upside Down
- Vehicle Equipment: for vehicles without level control
- Housing diameter in clamping area [mm]: 49
- Follow installation instructions
- Condition: New
More
