Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Audi A5 B9 Sportback 2.0TDI quattro 190 hp Diesel
- Coil spring Audi A5 B9 Sportback 2.0TDI quattro 190 hp Diesel
- Top strut mount and bearing Audi A5 B9 Sportback 2.0TDI quattro 190 hp Diesel
- Suspension kit, coil springs Audi A5 B9 Sportback 2.0TDI quattro 190 hp Diesel
- Shock absorber dust cover and bump stops Audi A5 B9 Sportback 2.0TDI quattro 190 hp Diesel
- Suspension kit, shock absorber and coil spring Audi A5 B9 Sportback 2.0TDI quattro 190 hp Diesel
- Spring cap Audi A5 B9 Sportback 2.0TDI quattro 190 hp Diesel
- Camber bolts Audi A5 B9 Sportback 2.0TDI quattro 190 hp Diesel
- Relay, leveling control Audi A5 B9 Sportback 2.0TDI quattro 190 hp Diesel
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Suspension kit, shock absorber and coil spring Audi A5 B9 Sportback 2.0 TDI quattro 190 hp Diesel
Article №: E90-15-023-16-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 20
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 20
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1160
- Axle Load rear axle to [kg]: 1250
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: E95-15-023-03-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1095
- Axle Load rear axle to [kg]: 1220
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: 28756-4
Details
-
- Registration Type: with TÜV® certificate
-
- Suspension: for vehicles without electronic suspension control
-
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 50
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 50
- for components see parts list
- Suspension Strut Outer Diameter [mm]: 48,5
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 48-262316
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1250
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1250
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1260
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B16 PSS10
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: ME1185N0041
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£121,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ME1185N0042
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£122,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MNE1185N0187
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£124,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MNE1185N0189
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Condition: New
More
Article №: MNE1185N0190
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Condition: New
More
Article №: 741120
Details
- Product line: BlueLine
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Surface: Powder coated, Galvanically coated
- Shock Absorber System: Height Adjustable
- Axle Load front axle to [kg]: 1215
- Axle Load rear axle to [kg]: 1240
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 50
- Lowered rear axle from [mm]: 20
- Lowered rear axle to [mm]: 50
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Condition: New
More
Article №: E90-15-023-04-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 20
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 20
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1080
- Axle Load rear axle to [kg]: 1250
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: E90-15-023-05-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 20
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 20
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1160
- Axle Load rear axle to [kg]: 1250
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: E90-15-023-15-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 20
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 20
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1080
- Axle Load rear axle to [kg]: 1250
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: E95-15-023-04-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1195
- Axle Load rear axle to [kg]: 1220
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: E95-15-023-09-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1095
- Axle Load rear axle to [kg]: 1220
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: E95-15-023-10-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1195
- Axle Load rear axle to [kg]: 1220
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: 28756-2
Details
-
- Registration Type: with TÜV® certificate
-
- Suspension: for vehicles without electronic suspension control
-
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 50
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 50
- for components see parts list
- Suspension Strut Outer Diameter [mm]: 53
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 46-334510
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1160
- Lowered Suspension ca. [mm]: 20
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1250
- Lowered Suspension ca. [mm]: 20
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: 46-334503
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1080
- Lowered Suspension ca. [mm]: 20
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1250
- Lowered Suspension ca. [mm]: 20
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: 46-334565
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1095
- Lowered Suspension ca. [mm]: 45
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1180
- Lowered Suspension ca. [mm]: 40
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: 46-334633
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1095
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1220
- Lowered Suspension ca. [mm]: 30
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: 46-334640
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1195
- Lowered Suspension ca. [mm]: 45
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1220
- Lowered Suspension ca. [mm]: 40
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: PSS65-15-023-08-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 35-60
- Axle Load rear axle to [kg]: 1265
-
- Observe service information
- EG type approval number from: e1*?/?*0430*45, e13*?/?*1084*29
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 35-60
- Axle Load front axle to [kg]: 1215
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Vehicle Equipment: for vehicles without level control
- Housing diameter in clamping area [mm]: 49
- Follow installation instructions
- Condition: New
More
Article №: 46-332851
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1160
- Lowered Suspension ca. [mm]: 20
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1250
- Lowered Suspension ca. [mm]: 20
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: 46-332844
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1080
- Lowered Suspension ca. [mm]: 20
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1250
- Lowered Suspension ca. [mm]: 20
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Showing 25 out of 33 products
