Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Audi A4 B5 Avant 2.6 quattro 150 hp Petrol
- Brake pads Audi A4 B5 Avant 2.6 quattro 150 hp Petrol
- Brake caliper Audi A4 B5 Avant 2.6 quattro 150 hp Petrol
- ABS sensor Audi A4 B5 Avant 2.6 quattro 150 hp Petrol
- Brake caliper repair kit Audi A4 B5 Avant 2.6 quattro 150 hp Petrol
- Handbrake Audi A4 B5 Avant 2.6 quattro 150 hp Petrol
- Brake disc back plate Audi A4 B5 Avant 2.6 quattro 150 hp Petrol
- Brake caliper carrier Audi A4 B5 Avant 2.6 quattro 150 hp Petrol
- Brake pad wear sensor Audi A4 B5 Avant 2.6 quattro 150 hp Petrol
- Brake hose Audi A4 B5 Avant 2.6 quattro 150 hp Petrol
- Master cylinder A4 2.6 quattro 150 hp Petrol
- Handbrake cable A4 2.6 quattro 150 hp Petrol
- Guide sleeve kit, brake caliper A4 2.6 quattro 150 hp Petrol
- Brake fluid A4 2.6 quattro 150 hp Petrol
- Handbrake shoes A4 2.6 quattro 150 hp Petrol
- Brake pad fitting kit A4 2.6 quattro 150 hp Petrol
- Brake servo A4 2.6 quattro 150 hp Petrol
- Wheel cylinder A4 2.6 quattro 150 hp Petrol
- Brake pads and discs A4 2.6 quattro 150 hp Petrol
- Brake light switch A4 2.6 quattro 150 hp Petrol
- Abs ring A4 2.6 quattro 150 hp Petrol
- Brake pipe A4 2.6 quattro 150 hp Petrol
- Brake caliper piston A4 2.6 quattro 150 hp Petrol
- Brake disc bolts A4 2.6 quattro 150 hp Petrol
- Brake fluid reservoir A4 2.6 quattro 150 hp Petrol
- Performance brake discs A4 2.6 quattro 150 hp Petrol
- Master cylinder repair kit A4 2.6 quattro 150 hp Petrol
- High-performance brake pads A4 2.6 quattro 150 hp Petrol
- Abs pump A4 2.6 quattro 150 hp Petrol
- Lateral and longitudinal acceleration sensor A4 2.6 quattro 150 hp Petrol
- Handbrake repair kit A4 2.6 quattro 150 hp Petrol
- Control unit, brake / driving dynamics A4 2.6 quattro 150 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Audi A4 B5 Avant 2.6 quattro 150 hp Petrol
Article №: SKAD-2006
Details
- for PR number: 1LB
- Fitting Position: Front Axle
- Diameter [mm]: 287,9
- Brake Disc Type: Vented
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 24,8
- Centering Diameter [mm]: 68
- Height [mm]: 46,4
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-63%
compared to RRP:
£52,30
£18,87
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562516JC
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 68
- Brake System: TRW
- Height [mm]: 47,9
- Weight [kg]: 9,93
- Surface: Coated
- Tightening Torque [Nm]: 120
- Version: JC
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 27
- Packaging width [cm]: 27
- Packaging height [cm]: 11,5
- Drilled: no
- Condition: New
More
£25,10
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF1706
Details
- Product line: PREMIER
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 68
- Height [mm]: 46
- Weight [kg]: 15,66
- Surface: Oiled
- Tightening Torque [Nm]: 120
- Number of mounting bores: 1
- Test Mark: R90 homologated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 28,8
- Packaging width [cm]: 28,8
- Packaging height [cm]: 5,6
- Drilled: no
- Condition: New
More
£25,57
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 128-901
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KE
- Product line: PRO High Carbon
- Diameter [mm]: 256
- Brake Disc Type: Externally Vented
- Hole Arrangement/Number: 05/05
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 68
- Height [mm]: 47,8
- Weight [kg]: 4,8
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£25,57
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 888
Details
-
- Construction Year to: 07/1998
- Fitting Position: Rear Axle
- Diameter [mm]: 245
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 47,7
- Surface: Oiled
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,6
- Drilled: no
- Condition: New
More
£26,96
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 561548CH
Details
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 68
- Height [mm]: 46
- Weight [kg]: 15,66
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 28,9
- Packaging width [cm]: 28,9
- Packaging height [cm]: 9,6
- Drilled: no
- Condition: New
More
£26,96
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF4210
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 68
- Height [mm]: 47,8
- Surface: Painted
- Thread Size: 15,5
- Colour: black
- Drilled: no
- Condition: New
More
-67%
compared to RRP:
£85,59
£27,43
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A1371V
Details
-
- Fitting Position: Front Axle
- for PR number: 1LB
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 68
- Height [mm]: 46
- Drilled: no
- Condition: New
More
£27,43
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92088503
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KD
- Product line: PRO
- Diameter [mm]: 245
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/05
- Wheel Bolt Bore Diameter [mm]: 15,6
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Inner Diameter [mm]: 135,7
- Height [mm]: 47,7
- Weight [kg]: 3,4
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 27,8
- Packaging width [cm]: 27,8
- Packaging height [cm]: 12,2
- Drilled: no
- Condition: New
More
-59%
compared to RRP:
£68,36
£27,43
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 100.1232.20
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KD
- Product line: COAT Z
- Diameter [mm]: 245
- Brake Disc Type: solid
- Rim Hole Number: 5
- Hole Arrangement/Number: 5/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 48
- Weight [kg]: 4,90
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
-70%
compared to RRP:
£93,82
£27,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 561548JC
Details
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 68
- Brake System: ATE
- Height [mm]: 46
- Weight [kg]: 15,66
- Surface: Coated
- Tightening Torque [Nm]: 120
- Version: JC
- Test Mark: R90 Homologated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging width [cm]: 30
- Packaging height [cm]: 12
- Drilled: no
- Condition: New
More
£27,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V10-80049
Details
- for PR number: 1LB
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 68
- Height [mm]: 46,5
- Weight [kg]: 8,451
- Brake Disc Hub Height [mm]: 21,2
- Packaging width [cm]: 30
- Packaging height [cm]: 10
- Packaging Depth [cm]: 30
- fulfils ECE norm: R90
- Drilled: no
- Condition: New
More
£28,36
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 105-681
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KD
- Product line: PRO
- Diameter [mm]: 245
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/05
- Wheel Bolt Bore Diameter [mm]: 15,6
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Inner Diameter [mm]: 135,7
- Height [mm]: 47,7
- Weight [kg]: 3,4
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-68%
compared to RRP:
£90,71
£28,36
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6328.10
Details
- for PR number: 1LB
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 68
- Height [mm]: 46,2
- Weight [kg]: 7,36
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£31,61
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24012201521-PCS-MS
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 68
- Inner Diameter [mm]: 146,5
- Height [mm]: 46,3
- Machining: High-carbon
- Required quantity: 2
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Net weight [kg]: 6,25
- Gross Weight [kg]: 6,40
- Drilled: no
- Condition: New
More
-35%
compared to RRP:
£54,19
£34,87
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 231-03-010
Details
-
- Fitting Position: Front Axle
- Construction Year to: 04/2001
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 68
- Height [mm]: 46,5
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£35,80
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24012501051-PCS-MS
Details
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Construction Year to: 04/2001
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 68
- Inner Diameter [mm]: 135
- Height [mm]: 46,5
- Machining: High-carbon
- Required quantity: 2
- No. of holes 2: 9
- Bore Diameter [mm]: 15,4
- Net weight [kg]: 7,45
- Gross Weight [kg]: 7,61
- Drilled: no
- Condition: New
More
-45%
compared to RRP:
£66,10
£36,26
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6040130
Details
-
- Construction Year to: 04/2001
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 24,8
- Centering Diameter [mm]: 68,2
- Height [mm]: 46,3
- Production Number: 6040130
- Drilled: no
- Condition: New
More
£37,66
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24012201521PR-PCS-MS
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 68
- Inner Diameter [mm]: 146,5
- Height [mm]: 46,3
- Surface: Coated
- Machining: High-carbon
- Required quantity: 2
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Net weight [kg]: 6,10
- Gross Weight [kg]: 6,10
- Drilled: no
- Condition: New
More
-41%
compared to RRP:
£65,02
£38,12
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD0136
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 68
- Height [mm]: 46,5
- Surface: Painted
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 33
- Packaging width [cm]: 31,5
- Packaging height [cm]: 12
- Drilled: no
- Condition: New
More
£38,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A1371V
Details
-
- Fitting Position: Front Axle
- for PR number: 1LB
- Diameter [mm]: 288
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 68
- Height [mm]: 46
- Drilled: no
- Condition: New
More
£38,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24012501051PR-PCS-MS
Details
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Construction Year to: 04/2001
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 68
- Inner Diameter [mm]: 135
- Height [mm]: 46,5
- Surface: Coated
- Machining: High-carbon
- Required quantity: 2
- No. of holes 2: 9
- Bore Diameter [mm]: 15,4
- Net weight [kg]: 7,30
- Gross Weight [kg]: 7,50, 7,5
- Drilled: no
- Condition: New
More
-49%
compared to RRP:
£79,30
£39,98
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A1052V
Details
-
- Construction Year to: 04/2001
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Number of Holes: 9
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 68
- Height [mm]: 46,2
- Drilled: no
- Condition: New
More
£39,98
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1163110300
Details
- for PR number: F0X
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 15
- Surface: Coated
- Drilled: no
- Condition: New
More
-34%
compared to RRP:
£62,09
£40,91
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0024231
Details
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: perforated/vented
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 68
- Height [mm]: 46,5
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: yes
- Condition: New
More
£55,33
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 300 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- ...
- 11
- 12
