Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Audi A4 B5 Avant 2.8 174 hp Petrol
- Brake pads Audi A4 B5 Avant 2.8 174 hp Petrol
- Brake caliper Audi A4 B5 Avant 2.8 174 hp Petrol
- ABS sensor Audi A4 B5 Avant 2.8 174 hp Petrol
- Brake caliper repair kit Audi A4 B5 Avant 2.8 174 hp Petrol
- Handbrake Audi A4 B5 Avant 2.8 174 hp Petrol
- Brake disc back plate Audi A4 B5 Avant 2.8 174 hp Petrol
- Brake pad wear sensor Audi A4 B5 Avant 2.8 174 hp Petrol
- Master cylinder Audi A4 B5 Avant 2.8 174 hp Petrol
- Brake caliper carrier Audi A4 B5 Avant 2.8 174 hp Petrol
- Brake hose A4 2.8 174 hp Petrol
- Handbrake cable A4 2.8 174 hp Petrol
- Guide sleeve kit, brake caliper A4 2.8 174 hp Petrol
- Handbrake shoes A4 2.8 174 hp Petrol
- Brake fluid A4 2.8 174 hp Petrol
- Brake pad fitting kit A4 2.8 174 hp Petrol
- Brake servo A4 2.8 174 hp Petrol
- Brake pads and discs A4 2.8 174 hp Petrol
- Brake light switch A4 2.8 174 hp Petrol
- Abs ring A4 2.8 174 hp Petrol
- Brake caliper piston A4 2.8 174 hp Petrol
- Brake pipe A4 2.8 174 hp Petrol
- Brake disc bolts A4 2.8 174 hp Petrol
- Brake fluid reservoir A4 2.8 174 hp Petrol
- Master cylinder repair kit A4 2.8 174 hp Petrol
- High-performance brake pads A4 2.8 174 hp Petrol
- Performance brake discs A4 2.8 174 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Audi A4 B5 Avant 2.8 174 hp Petrol
Article №: 82B0025
Details
- for PR number: 1LZ
- Fitting Position: Front Axle
- Diameter [mm]: 279
- Brake Disc Type: Vented
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15,7
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22,1
- Minimum thickness [mm]: 20,00
- Centering Diameter [mm]: 68
- Inner Diameter [mm]: 135,1
- Height [mm]: 46,4
- Surface: Uncoated
- Thread Size: 15,5
- Colour: black
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-49%
compared to RRP:
£ 45,00
£ 22,53
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0019
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 244,8
- Brake Disc Type: solid
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: M14x1,5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9,9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 45,2
- Inner Diameter [mm]: 51,9
- Height [mm]: 83,7
- Surface: Uncoated
- Hub Bore Diameter [mm]: 45,2
- Vehicle configuration line / variant: -ABS ring
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: with wheel hub
- Drilled: no
- Condition: New
More
-46%
compared to RRP:
£ 45,10
£ 23,91
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V10-40068
Details
-
- Drive Type: All-wheel Drive
- for PR number: 1KD
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 245
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 48
- Weight [kg]: 3,29
- Bore Diameter [mm]: 15,4
- Brake Disc Hub Height [mm]: 38
- Packaging width [cm]: 24,5
- Packaging height [cm]: 4,8
- Drilled: no
- Condition: New
More
£ 20,23
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKAD-2024
Details
- Fitting Position: Front Axle
- Diameter [mm]: 279
- Brake Disc Type: Vented
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15,7
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22,1
- Minimum thickness [mm]: 20,00
- Centering Diameter [mm]: 68
- Inner Diameter [mm]: 135,1
- Height [mm]: 46,4
- Surface: Uncoated
- Thread Size: 15,5
- Colour: black
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-49%
compared to RRP:
£ 45,00
£ 22,53
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKAD-2018
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 244,8
- Brake Disc Type: solid
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: M14x1,5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9,9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 45,2
- Inner Diameter [mm]: 51,9
- Height [mm]: 83,7
- Surface: Uncoated
- Hub Bore Diameter [mm]: 45,2
- Vehicle configuration line / variant: -ABS ring
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: with wheel hub
- Drilled: no
- Condition: New
More
-46%
compared to RRP:
£ 45,10
£ 23,91
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BDC5471
Details
-
- Fitting Position: Front Axle
- Brake System: Ate
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 68
- Height [mm]: 46,2
- Drilled: no
- Condition: New
More
Article №: V10-40011
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 245
- Brake Disc Type: solid
- Number of Holes: 5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 45,2
- Height [mm]: 83,6
- Weight [kg]: 6,1
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring
- Brake Disc Hub Height [mm]: 73,5
- Packaging width [cm]: 26
- Packaging height [cm]: 8
- Packaging Depth [cm]: 26
- Drilled: no
- Condition: New
More
£ 27,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08.6911.14
Details
- Diameter [mm]: 245
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 45
- Height [mm]: 84
- Vehicle configuration line / variant: -ABS ring
- Supplementary Article / Supplementary Info Info 2: without wheel bearing kit, without ABS sensor ring
- Drilled: no
- Condition: New
More
£ 27,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF2806
Details
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 68
- Height [mm]: 46,4
- Surface: Painted
- Thread Size: 15,5
- Colour: black
- Test Mark: E1 90R-02 C0176/0003
- Drilled: no
- Condition: New
More
-70%
compared to RRP:
£ 109,47
£ 32,19
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADV184379
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 245
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 84
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 45,1
- Weight [kg]: 5,7
- Surface: Coated
- Observe service information
- Drilled: no
- Condition: New
More
-38%
compared to RRP:
£ 53,99
£ 33,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF2771
Details
- Diameter [mm]: 245
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9,9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 45,3
- Height [mm]: 84
- Surface: Painted
- Thread Size: M14 x 1.5
- Colour: black
- Test Mark: E190R-02C0190/0690
- Drilled: no
- Condition: New
More
-69%
compared to RRP:
£ 108,73
£ 33,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF2652
Details
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 68
- Height [mm]: 46
- Surface: Painted
- Machining: High-carbon
- Thread Size: 15
- Colour: black
- Test Mark: E190R-02C0185/0544
- Drilled: no
- Condition: New
More
-71%
compared to RRP:
£ 120,05
£ 34,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADV184319
Details
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 46
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 68
- Weight [kg]: 7,7
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£ 34,95
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1163206800
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 245
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Surface: Coated
- Drilled: no
- Condition: New
More
-27%
compared to RRP:
£ 51,71
£ 37,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.5745.21
Details
- Product line: COATED DISC LINE
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 68
- Height [mm]: 46
- Surface: Coated
- Tightening Torque [Nm]: 120
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 38,63
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GH-424715
Details
- Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
- Diameter [mm]: 245
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9,9
- Centering Diameter [mm]: 45,3
- Height [mm]: 84
- Thread Size: M14 x 1.5
- Drilled: no
- Condition: New
More
£ 39,55
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GH-404700
Details
- Fitting Position: Front Axle, Front Axle Right, Front Axle Left
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 68
- Height [mm]: 46,4
- Thread Size: 15,5
- Drilled: no
- Condition: New
More
£ 43,23
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1163110400
Details
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Surface: Coated
- Drilled: no
- Condition: New
More
-28%
compared to RRP:
£ 63,10
£ 45,07
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0110-0210.1
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 245,0
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 10,0
- Minimum thickness [mm]: 8,0
- Centering Diameter [mm]: 45,2
- Inner Diameter [mm]: 135,5
- Support plate diameter [mm]: 50,3
- Height [mm]: 83,6
- Surface: Coated
- Thread Size: M14x1,5
- MAPP code available
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Drilled: no
- Condition: New
More
-53%
compared to RRP:
£ 99,03
£ 46,16
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD9382
Details
- Diameter [mm]: 288
- Brake Disc Type: Externally Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 68
- Height [mm]: 46,2
- Surface: Painted
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 33
- Packaging width [cm]: 31,5
- Packaging height [cm]: 12
- Drilled: no
- Condition: New
More
£ 46,45
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0125-0105.1
Details
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 25,0
- Minimum thickness [mm]: 23,0
- Centering Diameter [mm]: 68,0
- Inner Diameter [mm]: 135,0
- Height [mm]: 46,5
- Surface: Coated
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0118/0064
- Bore Diameter [mm]: 15,4
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
-59%
compared to RRP:
£ 116,86
£ 47,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0024231
Details
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23,0
- Centering Diameter [mm]: 68,0
- Inner Diameter [mm]: 135,0
- Height [mm]: 46,5
- Surface: Coated
- Machining: High-carbon
- No. of holes 2: 9
- Bore Diameter [mm]: 15,4
- Drilled: yes
- Condition: New
More
£ 55,65
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0325-0105.1
Details
- Product line: PowerDisc
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 25,0
- Minimum thickness [mm]: 23,0
- Centering Diameter [mm]: 68,0
- Inner Diameter [mm]: 135,0
- Height [mm]: 46,5
- Surface: Coated
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Bore Diameter [mm]: 15,4
- Drilled: no
- Condition: New
More
-58%
compared to RRP:
£ 139,53
£ 58,10
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.5745.76
Details
- Product line: MAX LINE
- Diameter [mm]: 288
- Brake Disc Type: internally vented, slotted
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 68
- Height [mm]: 46
- Surface: Coated
- Tightening Torque [Nm]: 120
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 60,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.5745.2X
Details
- Product line: XTRA LINE
- Diameter [mm]: 288
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23,5
- Centering Diameter [mm]: 68
- Height [mm]: 46
- Surface: Coated
- Tightening Torque [Nm]: 120
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: yes
- Condition: New
More
£ 66,69
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 66 products
Show the next items
- 1
- 2
- 3
