Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
-
Exhaust
- Lambda sensor Audi A4 B5 Avant 1.6 100 hp Petrol
- Turbo Audi A4 B5 Avant 1.6 100 hp Petrol
- EGR valve Audi A4 B5 Avant 1.6 100 hp Petrol
- Catalytic converter Audi A4 B5 Avant 1.6 100 hp Petrol
- Intercooler pipe Audi A4 B5 Avant 1.6 100 hp Petrol
- Exhaust silencer Audi A4 B5 Avant 1.6 100 hp Petrol
- Turbo solenoid valve Audi A4 B5 Avant 1.6 100 hp Petrol
- Exhaust pressure sensor (DPF) Audi A4 B5 Avant 1.6 100 hp Petrol
- Sensor, exhaust gas temperature Audi A4 B5 Avant 1.6 100 hp Petrol
- Mounting kit, exhaust system Audi A4 B5 Avant 1.6 100 hp Petrol
- Exhaust pipe A4 1.6 100 hp Petrol
- Flex pipe A4 1.6 100 hp Petrol
- Exhaust hanger A4 1.6 100 hp Petrol
- Exhaust manifold gasket A4 1.6 100 hp Petrol
- Turbo oil feed pipe A4 1.6 100 hp Petrol
- Exhaust manifold A4 1.6 100 hp Petrol
- Exhaust gasket A4 1.6 100 hp Petrol
- Exhaust clamp A4 1.6 100 hp Petrol
- Middle silencer A4 1.6 100 hp Petrol
- Secondary air pump A4 1.6 100 hp Petrol
- Egr valve gasket A4 1.6 100 hp Petrol
- Clamp, exhaust system A4 1.6 100 hp Petrol
- Catalytic converter mounting kit A4 1.6 100 hp Petrol
- Silencer rubber A4 1.6 100 hp Petrol
- Front silencer A4 1.6 100 hp Petrol
- Silencer mounting kit A4 1.6 100 hp Petrol
- Exhaust manifold mounting kit A4 1.6 100 hp Petrol
- Clamp, silencer A4 1.6 100 hp Petrol
- Euro1- / euro2- / d3 conversion A4 1.6 100 hp Petrol
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Lambda sensor Audi A4 B5 Avant 1.6 100 hp Petrol
Article №: 3922L0070
Details
-
- Engine Code: ADP
- Fitting Position: Exhaust Manifold
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 860
- Conductor Number: 4
- Number of connectors: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£29,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0879
Details
-
- Engine Code: ANA
- Construction Year from: 07/1999
- Oxygen Sensor: Regulating Probe
- Fitting Position: Exhaust Manifold
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 450
- Number of pins: 4
- Conductor Number: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£30,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0225
Details
-
- TecDoc Engine Number: ANA
- Construction Year from: 08/1998
- Construction Year to: 07/1999
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Identification Number (VIN) to: 8E..2..400 000
-
- TecDoc Engine Number: ANA
- Construction Year from: 08/1998
- Construction Year to: 07/1999
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 660
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0073
Details
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 625
- Number of pins: 4
- Number of circuits: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£32,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0204
Details
-
- Engine Code: ANA
- Transmission Type: Manual Transmission
- Construction Year from: 08/1998
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 480
- Conductor Number: 4
- Number of connectors: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£35,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0234
Details
-
- Engine Code: ANA
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 945
- Number of circuits: 4
- Number of connectors: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£36,44
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0046
Details
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 1160
- Number of pins: 4
- Conductor Number: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£38,24
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0227
Details
-
- TecDoc Engine Number: ADP, AHL, ARM
- Construction Year to: 10/2000
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£39,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0386
Details
-
- Construction Year from: 07/1999
- Engine Code: ANA
- Oxygen Sensor: Regulating Probe
- Exhaust System: for pre-catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 750
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£39,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0036
Details
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 1560
- Number of circuits: 4
- Number of connectors: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£44,10
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140074
Details
-
- Engine Code: ADP
- Fitting Position: Exhaust Manifold
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 860
- Conductor Number: 4
- Number of connectors: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£29,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0141039
Details
-
- Engine Code: ANA
- Construction Year from: 07/1999
- Oxygen Sensor: Regulating Probe
- Fitting Position: Exhaust Manifold
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 450
- Number of pins: 4
- Conductor Number: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£30,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140082
Details
-
- TecDoc Engine Number: ANA
- Construction Year from: 08/1998
- Construction Year to: 07/1999
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Vehicle Identification Number (VIN) to: 8E..2..400 000
-
- TecDoc Engine Number: ANA
- Construction Year from: 08/1998
- Construction Year to: 07/1999
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 660
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140084
Details
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 625
- Number of pins: 4
- Number of circuits: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£32,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140376
Details
-
- Engine Code: ANA
- Transmission Type: Manual Transmission
- Construction Year from: 08/1998
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 480
- Conductor Number: 4
- Number of connectors: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£35,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0073P
Details
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 590
- Number of pins: 4
- Number of circuits: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£39,42
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140089
Details
-
- TecDoc Engine Number: ADP, AHL, ARM
- Construction Year to: 10/2000
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£39,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0227P
Details
-
- TecDoc Engine Number: ADP, AHL, ARM
- Construction Year to: 10/2000
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£40,24
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0386P
Details
-
- Construction Year from: 07/1999
- Engine Code: ANA
- Oxygen Sensor: Regulating Probe
- Exhaust System: for pre-catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 750
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£40,24
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0070P
Details
-
- Engine Code: ADP, AHL, ARM
- Construction Year to: 10/2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: Exhaust Manifold
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 880
- Conductor Number: 4
- Number of connectors: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£50,34
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220158
Details
-
- TecDoc Engine Number: ADP, AHL, ARM
- Construction Year to: 10/2000
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£74,21
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220211
Details
-
- TecDoc Engine Number: ADP, AHL, ARM
- Construction Year to: 10/2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: Exhaust Manifold
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 860
- Conductor Number: 4
- Number of connectors: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£74,76
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220219
Details
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 625
- Number of pins: 4
- Number of circuits: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£78,50
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220099
Details
-
- Engine Code: ANA
- Construction Year from: 07/1999
- Oxygen Sensor: Regulating Probe
- Fitting Position: Exhaust Manifold
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 450
- Number of pins: 4
- Conductor Number: 4
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£139,05
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220151
Details
-
- TecDoc Engine Number: ANA
- Construction Year from: 07/1999
- Oxygen Sensor: Regulating Probe
- Exhaust System: for pre-catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 750
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
Showing 25 out of 300 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- ...
- 11
- 12
