Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Audi A4 B9 Saloon 2.0TFSI 252 hp Petrol
- Coil spring Audi A4 B9 Saloon 2.0TFSI 252 hp Petrol
- Top strut mount and bearing Audi A4 B9 Saloon 2.0TFSI 252 hp Petrol
- Suspension kit, coil springs Audi A4 B9 Saloon 2.0TFSI 252 hp Petrol
- Shock absorber dust cover and bump stops Audi A4 B9 Saloon 2.0TFSI 252 hp Petrol
- Suspension kit, shock absorber and coil spring Audi A4 B9 Saloon 2.0TFSI 252 hp Petrol
- Repair kit, wheel suspension Audi A4 B9 Saloon 2.0TFSI 252 hp Petrol
- Spring cap Audi A4 B9 Saloon 2.0TFSI 252 hp Petrol
- Camber bolts Audi A4 B9 Saloon 2.0TFSI 252 hp Petrol
- Relay, leveling control Audi A4 B9 Saloon 2.0TFSI 252 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Suspension kit, shock absorber and coil spring Audi A4 B9 Saloon 2.0 TFSI 252 hp Petrol
Article №: 28756-3
Details
-
- Suspension: for vehicles without electronic suspension control
-
- Vehicle Equipment: for vehicles without drive-select
-
- Registration Type: with TÜV® certificate
-
- Lowered rear axle to [mm]: 70
-
- Lowered rear axle from [mm]: 45
-
- Lowered front axle to [mm]: 60
-
- Lowered front axle from [mm]: 40
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 45
- Lowered rear axle to [mm]: 70
- for components see parts list
- Suspension Strut Outer Diameter [mm]: 48,5
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 28756-1
Details
-
- Vehicle Equipment: for vehicles without drive-select
-
- Suspension: for vehicles without electronic suspension control
-
- Registration Type: with TÜV® certificate
-
- Lowered rear axle to [mm]: 70
-
- Lowered rear axle from [mm]: 45
-
- Lowered front axle from [mm]: 40
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 45
- Lowered rear axle to [mm]: 70
- for components see parts list
- Suspension Strut Outer Diameter [mm]: 53
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: PSS65-15-023-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 40-65
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 40-65
-
- Observe service information
- EG type approval number from: e1*?/?*0430*35
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Axle Load front axle to [kg]: 1135
- Axle Load rear axle to [kg]: 1090
- Vehicle Equipment: for vehicles without level control
- Housing diameter in clamping area [mm]: 53
- Follow installation instructions
- Condition: New
More
Article №: PSS65-15-023-02-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 40-65
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 40-65
-
- Observe service information
- EG type approval number from: e1*?/?*0430*35
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Axle Load front axle to [kg]: 1135
- Axle Load rear axle to [kg]: 1090
- Vehicle Equipment: for vehicles without level control
- Housing diameter in clamping area [mm]: 49
- Follow installation instructions
- Condition: New
More
Article №: 48-262316
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1250
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1250
- Lowered Suspension ca. [mm]: 35-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1260
- Lowered Suspension ca. [mm]: 35-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B16 PSS10
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: ME1185N0041
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£120,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ME1185N0042
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£121,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MNE1185N0187
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£123,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: E90-15-023-12-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1080
- Axle Load rear axle to [kg]: 1180
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: E90-15-023-13-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1160
- Axle Load rear axle to [kg]: 1180
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: E90-15-023-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1080
- Axle Load rear axle to [kg]: 1180
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: E90-15-023-02-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1160
- Axle Load rear axle to [kg]: 1180
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: E95-15-023-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 40
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 45
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1095
- Axle Load rear axle to [kg]: 1180
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: E95-15-023-02-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 40
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 45
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1195
- Axle Load rear axle to [kg]: 1180
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: E95-15-023-07-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 40
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 45
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1095
- Axle Load rear axle to [kg]: 1180
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: E95-15-023-08-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 40
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 45
-
- Observe service information
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1195
- Axle Load rear axle to [kg]: 1180
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: 46-334459
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1080
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1180
- Lowered Suspension ca. [mm]: 30
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: 46-334480
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1060
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1180
- Lowered Suspension ca. [mm]: 30
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: 46-334565
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1095
- Lowered Suspension ca. [mm]: 45
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1180
- Lowered Suspension ca. [mm]: 40
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: 46-334572
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1195
- Lowered Suspension ca. [mm]: 45
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1180
- Lowered Suspension ca. [mm]: 40
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Housing diameter in clamping area [mm]: 49
- Condition: New
More
Article №: 46-275349
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1180
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1080
- Lowered Suspension ca. [mm]: 30
-
- Registration Type: Conditions see certificate
- Shock Absorber Type: Gas Pressure
- Suspension: for vehicles without electronic suspension control
- Product line: - B12 Pro-Kit
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: 46-278647
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1180
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1160
- Lowered Suspension ca. [mm]: 30
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Product line: - B12 Pro-Kit
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: 46-333001
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1095
- Lowered Suspension ca. [mm]: 45
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1180
- Lowered Suspension ca. [mm]: 40
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: 46-333018
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1195
- Lowered Suspension ca. [mm]: 45
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1180
- Lowered Suspension ca. [mm]: 40
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Housing diameter in clamping area [mm]: 53
- Condition: New
More
Article №: PSM69-15-023-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30-60
- Axle Load rear axle to [kg]: 1250
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30-60
- Axle Load front axle to [kg]: 1300
-
- Observe service information
- EG type approval number from: e1*2001/116*0430*35, e13*2007/46*1084*19
- Suspension: Adjustable Struts (height and performance adjustable)
- Registration Type: with certificate
- Shock Absorber System: Adjustable Shock Strength, Height Adjustable, Single Tube Upside Down
- Vehicle Equipment: for vehicles without level control
- Housing diameter in clamping area [mm]: 53
- Follow installation instructions
- Condition: New
More
Showing 25 out of 30 products
