Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
-
Exhaust
- Lambda sensor Audi A3 Saloon 2.0TFSI 220 hp Petrol
- Turbo Audi A3 Saloon 2.0TFSI 220 hp Petrol
- Catalytic converter Audi A3 Saloon 2.0TFSI 220 hp Petrol
- Intercooler Audi A3 Saloon 2.0TFSI 220 hp Petrol
- Intercooler pipe Audi A3 Saloon 2.0TFSI 220 hp Petrol
- Mounting kit, exhaust system Audi A3 Saloon 2.0TFSI 220 hp Petrol
- Turbo gasket Audi A3 Saloon 2.0TFSI 220 hp Petrol
- Boost pressure sensor Audi A3 Saloon 2.0TFSI 220 hp Petrol
- Exhaust hanger Audi A3 Saloon 2.0TFSI 220 hp Petrol
- Exhaust manifold gasket Audi A3 Saloon 2.0TFSI 220 hp Petrol
- Turbo oil feed pipe A3 2.0TFSI 220 hp Petrol
- Exhaust clamp A3 2.0TFSI 220 hp Petrol
- Exhaust gasket A3 2.0TFSI 220 hp Petrol
- Egr valve gasket A3 2.0TFSI 220 hp Petrol
- Diverter valve A3 2.0TFSI 220 hp Petrol
- Clamp, exhaust system A3 2.0TFSI 220 hp Petrol
- Silencer rubber A3 2.0TFSI 220 hp Petrol
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Lambda sensor Audi A3 Saloon 2.0 TFSI 220 hp Petrol
Article №: 3922L0365
Details
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 545
- Number of pins: 5
- Conductor Number: 5
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£37.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ES21273-12B1
Details
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Exhaust System: after catalytic converter
- Oxygen Sensor: Planar probe, Heated
- Cable Length [mm]: 801
- Condition: New
More
£38.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: LBS00209
Details
- Oxygen Sensor: Heated, Broadband oxygen sensor
- Fitting Position: before catalytic converter
- Overall Length [mm]: 740
- Length [mm]: 712
- Number of circuits: 5
- Conductor Number: 5
- Recommended change interval [km]: 80000
- Weight [kg]: 0,19
- Quality: OE EQUIVALENT
- Number of connectors: 1
- Supplementary Article / Supplementary Info Info 2: without clip
- Version: A
- Housing Colour: grey
- Connector Shape: D Shape
- Material: Metal
- Packaging length [cm]: 16
- Packaging width [cm]: 6,3
- Packaging height [cm]: 5,6
- Net weight [kg]: 0,16
- Number of pins: 5
- Line insulation design: with silicone insulation
- Condition: New
More
£39.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ES21183-12B1
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Exhaust System: before catalytic converter
- Oxygen Sensor: Broadband oxygen sensor, Heated
- Cable Length [mm]: 570
- Colour: grey
- Number of pins: 5
- Condition: New
More
£44.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: LBS00208
Details
- Oxygen Sensor: Heated, Broadband oxygen sensor
- Fitting Position: before catalytic converter
- Overall Length [mm]: 710
- Length [mm]: 682
- Number of circuits: 5
- Conductor Number: 5
- Recommended change interval [km]: 80000
- Weight [kg]: 0,19
- Quality: OE EQUIVALENT
- Number of connectors: 1
- Supplementary Article / Supplementary Info Info 2: without clip
- Version: A
- Housing Colour: grey
- Connector Shape: D Shape
- Material: Metal
- Packaging length [cm]: 16
- Packaging width [cm]: 6,3
- Packaging height [cm]: 5,6
- Net weight [kg]: 0,16
- Number of pins: 5
- Line insulation design: with silicone insulation
- Condition: New
More
£44.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: LBS00619
Details
-
- Fitting Position: after catalytic converter
- Construction Year to: 07/2018
- Oxygen Sensor: Oxygen Sensor
- Thread Size: M18X1.5mm
- Cable Length [mm]: 675
- Length [mm]: 770
- Number of circuits: 4
- Weight [kg]: 0,134
- Supplementary Article / Supplementary Info Info 2: without clip
- Housing Colour: black
- Connector Shape: D Shape
- Width [mm]: 24,6
- Height: 25,1
- Material: Metal
- Packaging length [cm]: 15
- Packaging width [cm]: 5,5
- Packaging height [cm]: 5,5
- Net weight [kg]: 0,10537
- Number of pins: 4
- Condition: New
More
£48.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 368021
Details
-
- Construction Year to: 05/2017
- TecDoc Engine Number: CHHB
- Oxygen Sensor: Planar probe, Thread pre-greased, Heated
- Thread Size: M18x1,5
- Fitting Position: before catalytic converter, after catalytic converter
- Cable Length [mm]: 800
- Number of pins: 4
- Weight [kg]: 0,16
- Connector Shape: oval
- Switch Pressure [bar]: 4
- Condition: New
More
£54.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ES21181-12B1
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Alternatively
- Oxygen Sensor: Broadband oxygen sensor, Heated
- Cable Length [mm]: 570
- Condition: New
More
£54.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ES21394-12B1
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Planar probe, Heated
- Cable Length [mm]: 585
- Condition: New
More
£59.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6PA 358 243-311
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Required quantity: 1
- Oxygen Sensor: Heated
- Cable Length [mm]: 550
- Number of pins: 5
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£61.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6PA 358 243-121
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Required quantity: 1
- Oxygen Sensor: Heated
- Cable Length [mm]: 700
- Number of pins: 5
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£61.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1.998.250
Details
-
- TecDoc Engine Number: CHHB
- Fitting Position: after catalytic converter
- Required quantity: 1
- Oxygen Sensor: Diagnostic Probe
- Supplementary Info: Made in Italy - OE Equivalent
- Oxygen Sensor: Heated, Planar probe, Thread pre-greased
- Cable Length [mm]: 800
- Number of circuits: 4
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.998.235
- Condition: New
More
£65.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: LBS00211
Details
- Oxygen Sensor: Heated, Planar probe
- Fitting Position: before catalytic converter
- Overall Length [mm]: 740
- Length [mm]: 712
- Number of circuits: 5
- Conductor Number: 5
- Recommended change interval [km]: 80000
- Weight [kg]: 0,18
- Quality: OE EQUIVALENT
- Number of connectors: 1
- Supplementary Article / Supplementary Info Info 2: without clip
- Version: A
- Housing Colour: grey
- Connector Shape: D Shape
- Material: Metal
- Packaging length [cm]: 16
- Packaging width [cm]: 6,3
- Packaging height [cm]: 5,6
- Net weight [kg]: 0,15
- Number of pins: 5
- Line insulation design: with silicone insulation
- Condition: New
More
£73.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0365P
Details
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 545
- Number of pins: 5
- Conductor Number: 5
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£74.11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-VW-000
Details
- Oxygen Sensor: Regulating Probe
- Fitting Position: Exhaust Manifold
- Number of pins: 5
- Fabrication Number: ESL-VW-000
- Condition: New
More
£74.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 258 027 215
Details
-
- Construction Year to: 07/2018
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Overall Length [mm]: 700
- Number of circuits: 5
- Condition: New
More
£77.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 258 030 096
Details
-
- Construction Year to: 07/2018
- Fitting Position: after catalytic converter
- Oxygen Sensor: Diagnostic Probe
- Overall Length [mm]: 780
- Number of circuits: 4
- Condition: New
More
£79.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8845 29155
Details
-
- Fitting Position: before catalytic converter
- Exhaust System: before catalytic converter
- Oxygen Sensor: Regulating Probe
- Overall Length [mm]: 700
- Number of connectors: 5
- Colour: grey
- Condition: New
More
Article №: 8845 29156
Details
-
- Fitting Position: after catalytic converter, before catalytic converter
- Exhaust System: after catalytic converter
- Oxygen Sensor: Diagnostic Probe
- Length [mm]: 800
- Number of connectors: 4
- Colour: black
- Number of pins: 4
- Condition: New
More
Article №: NOS00001
Details
-
- Left-/right-hand drive vehicles: for right-hand drive vehicles
- for PR number: 7CP
- Exhaust System: before catalytic converter
- Thread Size: M20*1.5-6e
- Spanner Size: 22
- Weight [kg]: 0,32
- Housing Colour: grey
- Packaging length [cm]: 17
- Packaging width [cm]: 5,2
- Packaging height [cm]: 5,5
- Net weight [kg]: 0,29
- Number of pins: 5
- Condition: New
More
Article №: 71SKV068
Details
-
- Left-/right-hand drive vehicles: for right-hand drive vehicles
- Exhaust System: before catalytic converter
- for PR number: 7CP
- Voltage [V]: 12
- Fitting Position: before catalytic converter, after catalytic converter
- Cable Length [mm]: 890
- Number of pins: 5
- Connector Shape: oval
- Weight [kg]: 0,34
- Always compare old and new part (in particular OE No.)
- Condition: New
More
Article №: 9 2803 1
Details
- Voltage [V]: 12
- for OE number: 04L 907 807 BQ
- Bore Diameter [mm]: 8,7
- Cable Length [mm]: 900
- Number of pins: 5
- Connector Shape: oval
- External Thread Size: M20 x 1,5
- Condition: New
More
Article №: YT-1754
Details
- Material: Chrome Vanadium Steel
- Spanner Size: 22
More
£4.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: YT-1753
Details
- Material: Chrome-Molybdenum Steel
- Spanner Size: 22
More
£4.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: HT8G323
Details
- Drive side (profile): Rectangle
- Drive [inch]: 1/2
- Work side (profile): Hexagon
- Spanner Size: 22
- Length [mm]: 50
- Vehicle type: VW, BMW, Audi, Ford, Skoda, SEAT
- Weight [g]: 225
More
£7.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 118 products
Show the next items
- 1
- 2
- 3
- 4
- 5
