Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs Audi 100 C3 2.2 Cat 137 hp Petrol
- Ignition coil Audi 100 C3 2.2 Cat 137 hp Petrol
- Glow plug control module Audi 100 C3 2.2 Cat 137 hp Petrol
- Ignition leads Audi 100 C3 2.2 Cat 137 hp Petrol
- Camshaft sensor Audi 100 C3 2.2 Cat 137 hp Petrol
- Crankshaft sensor Audi 100 C3 2.2 Cat 137 hp Petrol
- Distributor cap Audi 100 C3 2.2 Cat 137 hp Petrol
- Timing cover gasket Audi 100 C3 2.2 Cat 137 hp Petrol
- Distributor rotor Audi 100 C3 2.2 Cat 137 hp Petrol
- Distributor and parts Audi 100 C3 2.2 Cat 137 hp Petrol
- Ignition module 100 2.2 Cat 137 hp Petrol
- Plug, spark plug 100 2.2 Cat 137 hp Petrol
- Engine control unit (ECU) 100 2.2 Cat 137 hp Petrol
- Dust cover, distributor 100 2.2 Cat 137 hp Petrol
- Vacuum cell, ignition distributor 100 2.2 Cat 137 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Spark plugs Audi 100 C3 2.2 Cat 137 hp Petrol
Article №: 686S0012
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- TecDoc Engine Number: KU
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0512
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 3 - Earthed Electrode, with resistor, Connector Type SAE
- Thread Size: M14
- Supplementary Article / Supplementary Info Info 2: with flat seat
- TecDoc Engine Number: KU, HX
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0035
Details
- External Thread [mm]: 14,0
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Condition: New
More
£3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0319
Details
- External Thread [mm]: 14,0
- Product line: V-Line
- Thread Length [mm]: 19,0
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Condition: New
More
£13,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990011
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- TecDoc Engine Number: KU
- Condition: New
More
£1,10
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-19990510
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 3 - Earthed Electrode, with resistor, Connector Type SAE
- Thread Size: M14
- Supplementary Article / Supplementary Info Info 2: with flat seat
- TecDoc Engine Number: KU, HX
- Condition: New
More
£1,41
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 240 592
Set 4 - 0 242 240 849, Blister N15 - WR 6 DC
Details
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Required quantity: 5
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 062709000025
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,9
- Spanner Size: 20,8
- Spark Plug: 3 - Earthed Electrode, with resistor
- Thread Size: M14 x 1.25
- TecDoc Engine Number: KU, HX
- Condition: New
More
£3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CET8
Details
-
- Required quantity: 5
- Alternatively
- Product line: Aerovantage Spoiler
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Packing Type: Box
- Quality/ Grade: Ti Poly-V
- Technical Information Number: CET8
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£4,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0035P
Details
- Product line: Nickel
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,0
- Electrode Gap [mm]: 0,8, 1,1
- Spanner Size: 20,8 mm
- Spark Plug: Nickel-Copper Center Electrode, 3 - Earthed Electrode, with gasket seat, Nickel Middle Electrode
- Thread Size: M14 x 1,25
- Resistor [kOhm]: 6
- Condition: New
More
£4,70
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: W20TT
T02
Details
-
- TecDoc Engine Number: KU, HX
- Required quantity: 5
- Product line: Nickel TT
- Thread Length [mm]: 19
- Spanner Size: 20.6 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Crimped SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 58
- alternative item: IW20, IW20TT, IW20
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: UPT8
Details
-
- Required quantity: 5
- Alternatively
- Supplementary Info: ULTRA TITAN
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Quality/ Grade: Poly-V Tit
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2876
V-Line 1, BUR6ET
Details
- Product line: V-Line
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3172
Details
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 94024
Blister 09 - 4R
Details
- Supplementary Info: BLISTER
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: W20EPB
D29
Details
-
- TecDoc Engine Number: KU, HX
- Required quantity: 5
- Product line: Nickel
- Thread Length [mm]: 19
- Spanner Size: 20.6 mm
- Spark Plug: 3 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Removable SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 56
- for OE number: 101-000-007AB
- alternative item: W20TT
- Condition: New
More
£5,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: OE025/T10
RN8VTYC4, OE025
Details
- Product line: Igniter Industrial
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1
- Spanner Size: 21 mm
- Spark Plug: 3 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Required quantity: 5
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RN8VTYC4
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 1
- Resistor to [kOhm]: 2
- Projection [mm]: 1,4
- Condition: New
More
£5,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 7100512
Details
- Thread Length [mm]: 19
- Spark Position [mm]: 5,2
- Spanner Size: 20
- Spark Plug: Nickel Middle Electrode, 3 - Earthed Electrode
- Condition: New
More
£6,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6248
RL11L2DMC
Details
- Product line: LPG / GPL
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,5
- Spanner Size: 20,8 mm
- Spark Plug: with gasket seat, Connector Type M4, Platinum Middle Electrode, 1 - Earthed Electrode, Interference Suppression 1 kOhm
- Thread Size: M14 x 1,25
- Fuel Type: CNG/LPG
- Condition: New
More
£8,58
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0137P
Details
-
- TecDoc Engine Number: KU, HX
- Required quantity: 5
- Fuel Type: CNG/LPG
- Product line: Iridium
- Thread Length [mm]: 19
- Spark Position [mm]: 3,3
- Spanner Size: 20.6
- Spark Plug: 1 - Earthed Electrode, Iridium Middle Electrode, Nickel mass electrode
- Thread Size: M14x1,25
- Connector type: Solid SAE
- Diameter [mm]: 14
- Resistor [kOhm]: 6
- Country Specific Design: Japan
- Condition: New
More
£11,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990136
Details
-
- Engine Code: HX, KU
- Fuel Type: CNG/LPG
- Required quantity: 5
- Product line: Iridium TT
- Thread Length [mm]: 19
- Spanner Size: 20.6
- Spark Plug: 1 - Earthed Electrode, Iridium Middle Electrode
- Thread Size: M14x1.25
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Condition: New
More
£12,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: IW20TT
Details
-
- TecDoc Engine Number: KU, HX
- Required quantity: 5
- Fuel Type: CNG/LPG
- Product line: Iridium TT
- Thread Length [mm]: 19
- Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode, Platinum mass electrode
- Thread Size: M14x1.25
- Diameter [mm]: 14
- Gross Weight [g]: 61
- alternative item: IW20TT
- Condition: New
More
£12,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CCH9804
OE195, 9804
Details
-
- Required quantity: 5
- Alternatively
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode
- Thread Size: M14x1.25
- Connector type: SAE
- Packing Type: Box
- Quality/ Grade: Pt GE
- Technical Information Number: RN8WYPB3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 10
- Packaging width [cm]: 2,5
- Packaging height [cm]: 2,5
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£17,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1497
LPG Laser Line 2, LPG2
Details
- Product line: LPG Laser Line
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8 mm
- Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode
- Thread Size: M14 x 1,25
- Fuel Type: CNG/LPG
- Recommended change interval [km]: 60000
- Condition: New
More
£19,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990034
Details
- External Thread [mm]: 14,0
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 53 products
Show the next items
- 1
- 2
- 3
