Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Alfa Romeo MiTo 955 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Brake pads Alfa Romeo MiTo 955 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Brake caliper Alfa Romeo MiTo 955 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- ABS sensor Alfa Romeo MiTo 955 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Brake caliper repair kit Alfa Romeo MiTo 955 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Handbrake Alfa Romeo MiTo 955 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Brake disc back plate Alfa Romeo MiTo 955 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Brake caliper carrier Alfa Romeo MiTo 955 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Brake hose Alfa Romeo MiTo 955 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Master cylinder Alfa Romeo MiTo 955 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Handbrake cable MITO 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Vacuum pump MITO 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Guide sleeve kit, brake caliper MITO 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Brake fluid MITO 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Brake pad fitting kit MITO 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Brake servo MITO 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Brake pads and discs MITO 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Brake light switch MITO 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Brake caliper piston MITO 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Brake disc bolts MITO 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Performance brake discs MITO 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Abs pump MITO 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Control unit, brake / driving dynamics MITO 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Alfa Romeo MiTo 955 1.4 Bifuel (955AXG1A) 120 hp Petrol/Liquified Petroleum Gas (LPG)
Article №: 82B0469
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 251
- Brake Disc Type: solid
- Number of Holes: 4/8
- Wheel Bolt Bore Diameter [mm]: 13,1
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 59
- Height [mm]: 40,8
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-64%
compared to RRP:
£47,00
£16,55
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0318
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280,8
- Brake Disc Type: Vented
- Number of Holes: 4/8
- Wheel Bolt Bore Diameter [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 26,1
- Centering Diameter [mm]: 59
- Height [mm]: 43,7
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-59%
compared to RRP:
£59,70
£24,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022174
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 251
- Brake Disc Type: solid
- Number of Holes: 4/8
- Wheel Bolt Bore Diameter [mm]: 13,1
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 59
- Height [mm]: 40,8
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-64%
compared to RRP:
£47,00
£16,55
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V24-40010
Details
-
- Construction Year from: 07/2011
- Fitting Position: Rear Axle
- Supplementary Info: Original VAICO Quality
- Diameter [mm]: 251
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Centering Diameter [mm]: 59
- Height [mm]: 40,5
- Brake Disc Hub Height [mm]: 30,5
- Packaging width [cm]: 26
- Packaging height [cm]: 9
- Packaging Depth [cm]: 26
- Drilled: no
- Condition: New
More
£16,55
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0020323
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280,8
- Brake Disc Type: Vented
- Number of Holes: 4/8
- Wheel Bolt Bore Diameter [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 26,1
- Centering Diameter [mm]: 59
- Height [mm]: 43,7
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-70%
compared to RRP:
£59,70
£17,47
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADL144301
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 251
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 98
- Thickness [mm]: 41
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Centering Diameter [mm]: 59
- Surface: Coated
- Number of mounting bores: 4
- Observe service information
- Drilled: no
- Condition: New
More
£17,47
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V24-80003
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Diameter [mm]: 281
- Brake Disc Type: Vented
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24,2
- Centering Diameter [mm]: 59
- Height [mm]: 43,5
- Brake Disc Hub Height [mm]: 17,6
- Packaging width [cm]: 30
- Packaging height [cm]: 9
- Packaging Depth [cm]: 30
- Drilled: no
- Condition: New
More
£24,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17924
Details
- Product line: COATED
- Fitting Position: Rear Axle
- Diameter [mm]: 251
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Centering Diameter [mm]: 59
- Hub Diameter [mm]: 137
- Height [mm]: 40,8
- Weight [kg]: 3,42
- Surface: Coated
- Drilled: no
- Condition: New
More
-63%
compared to RRP:
£71,05
£25,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 116-441
Details
- Product line: PRO
- Fitting Position: Rear Axle
- Diameter [mm]: 251
- Brake Disc Type: solid
- Hole Arrangement/Number: 04/08
- Wheel Bolt Bore Diameter [mm]: 13,1
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Centering Diameter [mm]: 59
- Inner Diameter [mm]: 128
- Height [mm]: 40,8
- Weight [kg]: 3,4
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-71%
compared to RRP:
£92,23
£26,21
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15001C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 251
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 40,5
- Surface: Coated
- Drilled: no
- Condition: New
More
-62%
compared to RRP:
£75,22
£28,05
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0987C
Details
-
- Fitting Position: Rear Axle
- Construction Year from: 07/2011
- Diameter [mm]: 251,0
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10,0
- Minimum thickness [mm]: 9,0
- Centering Diameter [mm]: 59,0
- Height [mm]: 40,5
- Surface: Painted
- Test Mark: ECE-R90, ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£29,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562500JC
Details
-
- Fitting Position: Rear Axle
- VET Number from: 113577
- Diameter [mm]: 251
- Brake Disc Type: solid
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 59
- Height [mm]: 40,5
- Weight [kg]: 7,02
- Surface: Coated
- Tightening Torque [Nm]: 98
- Version: JC
- Test Mark: R90 Homologated
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging width [cm]: 26,5
- Packaging height [cm]: 10
- Drilled: no
- Condition: New
More
-71%
compared to RRP:
£105,34
£29,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0469P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 251
- Brake Disc Type: solid
- Number of Holes: 4/8
- Wheel Bolt Bore Diameter [mm]: 13,1
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 59
- Height [mm]: 40,8
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£29,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A2006P
Details
-
- Fitting Position: Rear Axle
- Rims: with steel rim
- Diameter [mm]: 251
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Centering Diameter [mm]: 59
- Drilled: no
- Condition: New
More
£30,35
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 610210C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 251
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Height [mm]: 40,5
- Surface: Painted
- Tightening Torque [Nm]: 98
- for OE number: 51805559
- VET Number from: 113577
- Drilled: no
- Condition: New
More
£30,35
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 4163102700
Details
- Fitting Position: Front Axle
- Diameter [mm]: 258
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 22
- Surface: Coated
- Drilled: no
- Condition: New
More
-30%
compared to RRP:
£45,61
£31,73
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-3338
Details
-
- VET Number from: 113577
- Rims: for steel rims
- VET Number to: 113576
- Fitting Position: Rear Axle
- Diameter [mm]: 251
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Centering Diameter [mm]: 59
- Height [mm]: 40,5
- Surface: Painted, Coated
- Colour: black
- Test Mark: E190R02 02C0190/0382
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Drilled: no
- Condition: New
More
£32,19
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD9293
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: internally vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20,2
- Centering Diameter [mm]: 59
- Height [mm]: 40,3
- Surface: Painted, Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 30
- Packaging width [cm]: 28,5
- Packaging height [cm]: 10
- Drilled: no
- Condition: New
More
£32,19
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 231-03-157
Details
- Fitting Position: Front Axle
- Diameter [mm]: 281
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 26
- Centering Diameter [mm]: 59
- Height [mm]: 43,5
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£32,19
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 103508
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 251
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 59, 59,0
- Height [mm]: 41
- Surface: Coated
- Drilled: no
- Condition: New
More
£33,57
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0318P
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280,8
- Brake Disc Type: Vented
- Number of Holes: 4/8
- Wheel Bolt Bore Diameter [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 26,1
- Centering Diameter [mm]: 59
- Height [mm]: 43,7
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£40,57
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-2014
Details
- Fitting Position: Front Axle
- Diameter [mm]: 281
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24,2
- Centering Diameter [mm]: 59
- Height [mm]: 43,5
- Surface: Painted
- Thread Size: 13,25
- Drilled: no
- Condition: New
More
£40,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B130472
Details
- Fitting Position: Front Axle
- Diameter [mm]: 281
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24,2
- Centering Diameter [mm]: 59
- Inner Diameter [mm]: 127,0
- Height [mm]: 43,5
- Bore Diameter [mm]: 13,0
- Drilled: no
- Condition: New
More
£48,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20418
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 251
- Brake Disc Type: solid
- Number of Holes: 4/8
- Wheel Bolt Bore Diameter [mm]: 13,1
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 59
- Height [mm]: 40,8
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£64,65
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20258
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280,8
- Brake Disc Type: Vented
- Number of Holes: 4/8
- Wheel Bolt Bore Diameter [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 26,1
- Centering Diameter [mm]: 59
- Height [mm]: 43,7
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£99,07
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 191 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
