Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Alfa Romeo 155 167 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Brake pads Alfa Romeo 155 167 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Brake caliper Alfa Romeo 155 167 1.6 16V T.S. (167.A6A) 120 hp Petrol
- ABS sensor Alfa Romeo 155 167 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Brake caliper repair kit Alfa Romeo 155 167 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Handbrake Alfa Romeo 155 167 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Brake disc back plate Alfa Romeo 155 167 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Brake pad wear sensor Alfa Romeo 155 167 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Brake caliper carrier Alfa Romeo 155 167 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Brake hose Alfa Romeo 155 167 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Master cylinder 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Handbrake cable 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Guide sleeve kit, brake caliper 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Brake fluid 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Handbrake shoes 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Brake pad fitting kit 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Brake servo 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Brake pads and discs 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Brake light switch 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Abs ring 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Brake power regulator 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Brake caliper piston 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Performance brake discs 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Master cylinder repair kit 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- High-performance brake pads 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Abs pump 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Handbrake repair kit 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Repair kit, wheel brake cylinder 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Control unit, brake / driving dynamics 155 1.6 16V T.S. (167.A6A) 120 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Alfa Romeo 155 167 1.6 16V T.S. (167.A6A) 120 hp Petrol
Article №: 82B0384
Details
- Fitting Position: Rear Axle, Front Axle
- Diameter [mm]: 240,2
- Brake Disc Type: solid
- Number of Holes: 4/6
- Wheel Bolt Bore Diameter [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 11
- Centering Diameter [mm]: 59
- Height [mm]: 40
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- fulfils ECE norm: ECE-R90
- Drilled: no
- Condition: New
More
-39%
compared to RRP:
£24,50
£14,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0068
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257,2
- Brake Disc Type: Vented
- Number of Holes: 4/8
- Wheel Bolt Bore Diameter [mm]: 13,1
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 59,1
- Height [mm]: 40,4
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-49%
compared to RRP:
£38,90
£19,77
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A2221P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Number of Holes: 4
- Minimum thickness [mm]: 9,2
- Centering Diameter [mm]: 59
- Height [mm]: 40
- Drilled: no
- Condition: New
More
£8,91
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022801
Details
- Fitting Position: Front Axle
- Diameter [mm]: 240,2
- Brake Disc Type: solid
- Number of Holes: 4/6
- Wheel Bolt Bore Diameter [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 11
- Centering Diameter [mm]: 59
- Height [mm]: 40
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-39%
compared to RRP:
£24,50
£14,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08.5085.14
Details
-
- Fitting Position: Rear Axle
- not for vehicle production country: Community of Independent States
- Product line: Prime
- Diameter [mm]: 240
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 11
- Minimum thickness [mm]: 9,2
- Centering Diameter [mm]: 59
- Height [mm]: 40
- Tightening Torque [Nm]: 98
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£14,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 342
Details
-
- Construction Year to: 10/1997
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 10,9
- Minimum thickness [mm]: 9,2
- Centering Diameter [mm]: 59
- Height [mm]: 40
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13
- Drilled: no
- Condition: New
More
£15,17
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V24-40002
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 241
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 11
- Minimum thickness [mm]: 9,2
- Centering Diameter [mm]: 59
- Brake System: LUCAS
- Height [mm]: 40
- Weight [kg]: 4,12
- Brake Disc Hub Height [mm]: 29
- Packaging width [cm]: 26
- Packaging height [cm]: 8
- Packaging Depth [cm]: 26
- fulfils ECE norm: R90
- Drilled: no
- Condition: New
More
£17,01
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF140
Details
- Product line: PREMIER
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 11
- Minimum thickness [mm]: 9,2
- Centering Diameter [mm]: 59
- Height [mm]: 40
- Weight [kg]: 7,2
- Surface: Oiled
- Tightening Torque [Nm]: 98
- Test Mark: R90 homologated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 24,1
- Packaging width [cm]: 24,1
- Packaging height [cm]: 8,4
- Drilled: no
- Condition: New
More
£17,01
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6110.00
Details
- Fitting Position: Front Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 11
- Centering Diameter [mm]: 59
- Height [mm]: 40
- Weight [kg]: 3,46
- Test Mark: K.B.A.: 61210
- Drilled: no
- Condition: New
More
£17,47
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 561380JC
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 11
- Minimum thickness [mm]: 9,2
- Centering Diameter [mm]: 59
- Brake System: BENDIX
- Height [mm]: 40
- Weight [kg]: 7,2
- Surface: Coated
- Tightening Torque [Nm]: 98
- Version: JC
- Test Mark: R90 Homologated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging width [cm]: 25
- Packaging height [cm]: 9,5
- Drilled: no
- Condition: New
More
£17,47
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6110.00
Details
- Fitting Position: Front Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 11
- Minimum thickness [mm]: 9,2
- Centering Diameter [mm]: 59
- Height [mm]: 40
- Weight [kg]: 3,46
- Test Mark: K.B.A.: 61210
- Drilled: no
- Condition: New
More
£17,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15857
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 11
- Minimum thickness [mm]: 9,2
- Centering Diameter [mm]: 59
- Hub Diameter [mm]: 137
- Height [mm]: 39
- Weight [kg]: 3,48
- Drilled: no
- Condition: New
More
-49%
compared to RRP:
£35,83
£17,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 561380CH
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 11
- Minimum thickness [mm]: 9,2
- Centering Diameter [mm]: 59
- Height [mm]: 40
- Weight [kg]: 7,2
- Tightening Torque [Nm]: 98
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 25
- Packaging width [cm]: 25
- Packaging height [cm]: 10,2
- Drilled: no
- Condition: New
More
-71%
compared to RRP:
£61,85
£17,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0384P
Details
- Fitting Position: Rear Axle, Front Axle
- Diameter [mm]: 240,2
- Brake Disc Type: solid
- Number of Holes: 4/6
- Wheel Bolt Bore Diameter [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 11
- Centering Diameter [mm]: 59
- Height [mm]: 40
- Surface: Coated
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Drilled: no
- Condition: New
More
-54%
compared to RRP:
£40,14
£18,23
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: FT31002
Details
- Fitting Position: Front Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Number of Holes: 4
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 11
- Minimum thickness [mm]: 9,2
- Centering Diameter [mm]: 59
- Inner Diameter [mm]: 123
- Hub Diameter [mm]: 137
- Height [mm]: 40
- Number of mounting bores: 2
- Drilled: no
- Condition: New
More
-18%
compared to RRP:
£26,59
£21,61
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0232C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 241
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10,9
- Centering Diameter [mm]: 59,0
- Height [mm]: 39,7
- Surface: Painted
- Test Mark: ECE-R90
- Drilled: no
- Condition: New
More
£22,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-0680
Details
- Fitting Position: Rear Axle, Front Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 10,9
- Minimum thickness [mm]: 9,2
- Centering Diameter [mm]: 59
- Height [mm]: 40
- Surface: Painted
- Technical Information Number: 98200 0611 0 1 PRO
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 27
- Packaging width [cm]: 25,5
- Packaging height [cm]: 10
- Drilled: no
- Condition: New
More
£23,91
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3363200500
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 11
- Surface: Coated
- Drilled: no
- Condition: New
More
-24%
compared to RRP:
£31,60
£23,91
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-0680MAX
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 11
- Minimum thickness [mm]: 9,2
- Centering Diameter [mm]: 59
- Height [mm]: 40
- Surface: Painted, Coated
- Technical Information Number: 98200 0611 0 1 PRO
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 27
- Packaging width [cm]: 25,5
- Packaging height [cm]: 10
- Drilled: no
- Condition: New
More
£24,83
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6189.10
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,2
- Centering Diameter [mm]: 59
- Height [mm]: 40,5
- Weight [kg]: 4,87
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£25,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-0703
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,2
- Centering Diameter [mm]: 59
- Height [mm]: 40,6
- Surface: Painted
- Test Mark: E190R02 C0176/0520
- Drilled: no
- Condition: New
More
£26,67
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B130029
Details
- Fitting Position: Front Axle
- Diameter [mm]: 258
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,2
- Centering Diameter [mm]: 59
- Inner Diameter [mm]: 126,7
- Height [mm]: 40,5
- Bore Diameter [mm]: 13,0
- Drilled: no
- Condition: New
More
£29,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6110091
Details
- Fitting Position: Front Axle Left, Front Axle Right
- Diameter [mm]: 257
- Brake Disc Type: internally vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 19,9
- Minimum thickness [mm]: 18,2
- Centering Diameter [mm]: 59
- Inner Diameter [mm]: 126,4
- Height [mm]: 40,6
- Surface: Painted, Cross-hatch
- fulfils ECE norm: R90
- Drilled: no
- Condition: New
More
-57%
compared to RRP:
£74,70
£31,73
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20397
Details
- Fitting Position: Rear Axle, Front Axle
- Diameter [mm]: 240,2
- Brake Disc Type: solid
- Number of Holes: 4/6
- Wheel Bolt Bore Diameter [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 11
- Centering Diameter [mm]: 59
- Height [mm]: 40
- Surface: Coated
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Drilled: no
- Condition: New
More
£40,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20046
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257,2
- Brake Disc Type: Vented
- Number of Holes: 4/8
- Wheel Bolt Bore Diameter [mm]: 13,1
- Bolt Hole Circle Ø [mm]: 98
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 59,1
- Height [mm]: 40,4
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£105,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 234 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
