Parking sensors kit BEEPER RK039RF 4
Parking sensors kit BEEPER RK039RF
- Sensor Type: Ultrasonic Sensor
- Number of sensors: 4
- Monitor Type: LED
- Cable Length [m]: 2,5
- Condition: New
The BEEPER RK039RF is a parking aid system, which alerts the driver when reversing. It is an extremely simple and efficient system, the wireless communication between the control unit and the display will allow a simple, fast and risk-free installation for your vehicle.
For an increased comfort
The BEEPER RK039RF is equipped with an LED display for better visibility, the latter allowing a perfect integration in the passenger compartment of your vehicle. The display allows the reading not only of the distance, but also of the position of the detected obstacle.
More safety
The BEEPER RK039RF is equipped with 4 ultrasonic sensors for an optimal detection zone, so it detects all obstacles, reduces the risks of collisions and related repair costs. So be confident when maneuvering, exiting parking lots ... As soon as you put the car in reverse, the 4 sensors detect the presence of potential obstacles behind the vehicle.
As you approach an obstacle, the beeps become closer and closer. When the signal becomes continuous, your bumper is within a foot of the obstacle. No more risk of damaging the rear of your vehicle. ...
Composition of the kit
Main functions
- Rear detection (from 2,5 m. to 30 cm)
- 4 ultrasonic sensors
- 10 levels of alert
- Audible alert by BEEP (from 1,5 m. to 30 cm)
- Wireless display
- Visual alert by ultra-luminescent LED indicator
- Activation by reverse light
- Indication of the position of the obstacle by LCD segments
- 2,5m cable from the central unit to the sensors
Installation of the sensors
The sensors must be placed at least 50cm from the ground. Indeed, sensors placed lower will detect the ground, which will generate unwanted triggers.
If you have a commercial vehicle, sports car or other vehicle with a lowered bumper, we have a solution for you. You have the possibility of ordering specific sensors with angles which allow an installation more basic; with 43cm of the ground. Access to the product sheet by clicking HERE.
The sensors can be covered with a veil of paint for a perfect finish.
WARNING - VEHICLES FORBID TO CONNECT A CONSUMER ON THE REVERSE LIGHT BEAM
On certain vehicles the +12 V reversing light is parasitic when the engine is in operation what can disturb the good operation of the reversing radar kit. In other cases, this +12 V Backup Light does not allow any additional consumer.
For all these vehicles, Beeper has developed the RCANR2 module to retrieve the +12 V Backup Light information from the CANBUS network. This module connects to the CANBUS of the compatible vehicle and delivers a +12V Backup Light for the connection of a backup camera.
You will find this module canbus RCANR2
Product not compatible with a metal bumper
The BEEPER RK039RF is of course a complete kit, delivered with all the necessary accessories for the assembly, as well as a simple and clear instruction manual.
